Это видео недоступно.
Сожалеем об этом.
LC300 steering wheel upgrade in 70 series with complete wiring guide
HTML-код
- Опубликовано: 13 авг 2024
- In this video we install a 300 series steering wheel into the 79. The LC300 wheel is a direct replacement onto the steering column. However, if you wish to have a completely functional steering wheel with controls, these inputs must be wired in. These are; KEY 1, KEY 2, GROUND and illumination. Some mainstream headunits may not have KEY inputs and in this case you will need a steering wheel interface module (decoder) which converts KEY analogue signals to a code most headunits will recognise.
I NOW STOCK THE FOLLOWING PARTS FOR EASE OF INSTALL:
- LC70 PNP steering wheel control harness: www.jcyt.com.au/product-page/...
- Compatible clockspring: www.jcyt.com.au/product-page/...
Parts used in this video.
1) 300 series steering wheel kit **Ask for ADDITIONAL 10-pin harness from 2008-2015** - www.aliexpress.com/item/10050...
2) Haltech 12-pin TYCO with pins - www.haltech.com/product/ht-03...
3) Hilux CLOCKSPRING 84306-0K051 - www.jcyt.com.au/product-page/...
IF YOUR HEADUNIT DOES NOT HAVE KEY1 and KEY2 INPUTS, you will also need additional harnesses.
4) Aerpro CHT03C SWC harness SUITS TOYOTA 2015-ON
5) Aerpro APUNIPL2 Universal SWC patch lead
0:00 Intro
0:57 Removal of factory components
4:12 Clockspring upgrade
6:05 Steering wheel control wiring
11:06 Airbag detonator swap
12:16 Install new parts
15:44 Programming keys and demo
HI TEAM
There has been an overwhelming interest in these "plug and play" pre-terminated harnesses.
I anticipate these will cost approx 80-100 to make it worth my while and to contribute towards building the channel. I will only be using Genuine TE connectors and Raychem cable.
If you are interested, please drop me a comment below and i will count you in for the initial batch.
Cheers
Hi , how much the whole thing cost ? Would like to know if you can install it for me with extra cost, and whereabouts are you in Queensland , … count me in
count me in mate. Any chance we can order them now or is there a wait?
Mate very keen, how do we get one off ya?
Keen on one mate
Count me in as well, cheers
Who would have guessed that watching a steering wheel change could be so entertaining?
Hahaha you must be easily entertained! I found it hard to edit *falls asleep*
@@JCYT Excellent video Jonathan. We share similar interests. I have a 79 series, an Rx8 which will soon have a 20b and I love the Hondas.
Need one on a 100 series next 👌🏽
Fantastic video. Thanks to your explanations I've been able to do the same mod to my 2007 hilux. Thank you very much.
The only problem is that only the left side of wheel controls work, I have to check connections, but very happy anyway
Great to hear and you're welcome.
What functions of the wheel aren't working?
@@JCYT Hello, I bought a different steering wheel in china, it is the same model that appears in this PVS video.
ruclips.net/video/2p6_O8d9T-g/видео.html
And only the keys on the left side work, I guess the ones on the other side are for cruise control (that my car does not have) and stuff like that.
The PVS steering wheel can actually use all the buttons to control the headunit, but they use a wireless system instead of the spiral cable, so I guess they modified the connections, internally in the transmitter, to make it work.
This is excellent, thank you mate.
Awaiting delivery of my 79 currently, i wouldnt have tackled this mod previously, however its just been added to my list!
No problems mate
Good luck! Hope the wait hasn't been too bad!
I thought I recognised that car and that street I Live in North Rocks nice job on the steering wheel I have my new 79 ordered 18 months now but toyota still telling me I wont get it until June 24 so I m hunting RUclips for my upgrades ahead of time.
Of that'd be a tough wait! Feel free to come by and say hello sometime
@@JCYT I wouldn't want to intrude but I may be in touch if when i pick up the car with a few questions on pricing and what all you upgraded to your 79
Great video man!
Thank you!
I don’t even own a land cruiser but this video intrigued me to watch it all. Very interesting & entertaining 👍👍
thanks mate i dont know how you found it that interesting haha! thanks for watching it
Looks fantastic, looks better than the PVS and it doesnt have their branding.
All these aftermarket wheels you see on the market come from China. Putting a badge on it doesn't make it your own
The video is very informative , easy to follow and detailed explanations. are you going to upgrade the sound systems as well? That would be amazing!
Well done ! Can’t wait for your next videos .
Thank you! Appreciate the feedback. No plan at the moment as it isn't a priority. The 12V system will be next and maybe will do the interior after? We'll see!
Thanks for the video, really good info and yes I agree about your comment re a certain shop with a illegal 70 series
🙃😁
Cheers mate
Awesome video Jonathan all the details and looks great
Cheers mate good luck!
Hi, Jonathan. I was hoping you could help me. I have an LC200 2007/2008 model and it didn't come with steering wheel control buttons. However, I do see the 10-pin connector on the clock spring. So am I right to assume that wiring for the steering wheel already exists in my unit and I just need to find it, or do I need to do the same wiring you did on the video? Hope you can share some insights. Been wanting to do this for quite some time. Nearly had a crash trying to adjust volume using the touch screen on my aftermarket head unit.
Hey mate
I will not be able to confirm but can give you a few things you can check to verify. I believe the clockspring will accept a steering wheel with controls, but you will need to trace the wiring from the clockspring connector to your radio. The black male connector which plugs into the clockspring should have a minimum of 6-7 wires coming from it. If you want to take a picture and send it to my website through the contact form i'll have a quick look for you
Great video and detailed information mate. 10 points. 👍
Thanks mate apprecaite the feedback
Very tempted to try this on my 200
It's worth it! Would be plug and play for you too
@@JCYT I just have to figure out the clock spring if it's going to be an issue or not
Based on my research it will be a direct drop in for you
Hey Jonathan, really enjoy watching your content! I have purchased both the joying head unit and Now the 300 series steering wheel for my 79 series. I have installed the head unit but now waiting for the steering wheel. I have noticed in this video you have managed to raise your unit even higher again? If so how did you achieve this?
Keep up the good work 👌
Thanks mate appreciate the kind words!
I've only raised the unit once. Quite happy with the height.
I really need to make a separate video on this as it's asked quite regularly.
I lifted the screen with a piece of alloy. Mounted the 4 clips onto the alloy and then the screen higher up. Actually really happy with it!
Excellent video Jonathan
Hey mate you never actually said who or where you got the steering wheel from.
Could you please let me know ?? Thanks and well done 👍
Thanks mate
Check the video description - there is a link there to the product
Awesome stuff Jonathan. Now I want a new steering wheel. 😂
Which centre console have you installed there please? Looks really nice in black. Thanks for sharing your work.
Appreciate the feedback!
It's a Department of the Interior centre console. Consoles.com.au
Their work is second to none! All handcrafted in Sydney! Cheers
Thank you. Look forward to more content on the 70.
Interesting. I have a 2011 vdj 76 and i have autron cruise control with the controller stuck on the side of the standard steering wheel. Any possibility of getting that to work with one of these steering wheels?
Came out good. Clean job. . Was he radio functioning with the steering ?
Yes all functional with the wiring harness.
Great stuff , would you be able to share a diagram of the connection ? I would love some advise on installing these bad boys …
Hey mate, great video!
Have recently installed both the joying head unit and the 300 series steering wheel.
Just wondering if you have worked out how to get the full cruise control to work. As in speed up and down from the steering wheel.
As mine is set is set, push up it slows down, push down and it cancels. Which is fine when you get used to it, just wondering if you have sorted this in your setup?
Cheers!
Cheers mate!
Yes it works fully on mine. The buttons are just mixed up and I am so used to it now 😂
CC on/off turns it on and off
+ button will decrease speed
- button pauses CC
Cancel button will increase speed
I do want to look into it but just don't have time atm. So no I haven't yet sorted it
Morning Jonathan, I have an Alpine ixlF511A head unit in my cruiser, and when I purchased I requested the parts to be able to add a update steering wheel down the track, the supplier gave me two loam's CCHTO15C and APP9ALOPV, would i still need your harness, I will get a clockspring. Do they stock the steering wheels in OZ that I can go and pick up ( cash sale)
Good morning mate
I had a look for you this morning. There are no helpful instructions from Alpine.
While you would still need my harness for any connection to be made (70 series don't come with steering wheel control harness from factory), i haven't figured out how it will hook up to the CCHTO15C Aerpro interface. The aftermarket android units have their own canbus converter so it makes installation as simple as connection two wires. I would expect the Aerpro interface to interpret a combination of signals from the steering wheel but unless i have it in front of me, i cannot be of any more help.
No i don't think so. I've seen a few "companies" selling them. But they are simply dropshipping OR buying in bulk quantities to make a quick dollar.
Ktx-G601R this is in another language (could probably use a translator app)
I wonder if this might work
@@JCYT Toyota Land Cruiser 76 79 80 Upgrade Steering Wheel Assembly LC76 LC79 LC80 Interior Modification Accessories Replacement OR your link to the one in your description? What is the difference?
Hi Mate, i am finally doing the same upgrade on my 2022 79 series. do you have any pre made harnesses for sale.
Hi mate, sorry for the delay in getting back.
Yes, hop on over to the website
www.jcyt.com.au/product-page/lc70-steering-wheel-control-harness
Hi Jonathan with your diagram at 9:11 you have cruise control at numbers 1&2 which one is the positive. My 79 has a aftermarket cruise control which the switch is on the driver side end of the dash and I’m trying to transfer the wiring to the steering wheel. Just wanted to know where the live wire to the switch connects to. Thanks, Jason 👍
Hey mate
Sorry i don't actually know as i wired the two cc wires in the same pin position of the new connector. It wouldn't be hard to figure out using a multimeter though?
Good luck with it
Really enjoyed the video, Jonathan, got a lot out of it, thank you.
Can I ask about the Android head unit make and model ?
No problem mate thanks!
It's a Joying 10.1
Did a full video on it too!
ruclips.net/video/cvjAmXgpBAU/видео.html
Hey Jonathan, Great video mate, Where did you get the steering wheel from?
Hey mate
It's off aliexpress. Check the link in the description. Last I checked was still working 👍
Very nice video! You made me really keen on doing the same on mine now!
Any idea how this would work with an aftermarket cruise control like the 'Autostrada' on a pre 2016 Cruiser?
Also, what if you just want to use this with a stock head unit, how would you preset the controls? Is that even going to be needed, or would it just plug and pray?
Hey mate
I really couldn't answer that as my car came with factory cruise control. I believe you still will have to buy the plug and play harness. I've seen some companies sell them like SSV, PVS etc. Good luck with it. With the stock headunit, if you do the wiring properly you shouldn't need to preset any controls, the stock headunit has these preset.
Thanks Jonathon, a question re cruise control. I have the 2023 79 series with cruise control stalk. Is this stalk now removed and cruise activated within the steering wheel buttons instead. Connecting to a Kenwood head unit. Cheers.
Hey mate yes correct the factory stalk isn't required and plugs directly into the new 300 wheels. Cheers
I think the 79 needs some downlights 🤗
say no more
I see that you raised the location of the head unit/screen so that it's now level with the top of the dash 😄 any pointers?
Hey mate
Sorry i don't have time to do a video on this so i'll give you as much info as i can
I had a piece of aluminium lying around prob about 2-3mm thick
I mounted the screen higher on the aluminium, i could not find the exact screw (i'm sure you can find these online) so went to jaycar got some M3 screws and tapped in a new thread into the screen. I definitely wouldn't do this unless you are confident, be careful what is behind those screws you don't want to go too far and risk damaging the screen.
I then mounted the 4 feet about an inch lower on the bracket.
It was very easy to do - it sits at the perfect height now!
Thanks for that!
You might be interested to know that, I was looking on the Joying site and the new android 12 units with the Snapdragon chip, now have smaller bezels on the display, this slightly reducing the overall size, and on the 11.6 inch it has a black screen border not chrome.
So it will fit between the air vents, whilst not blocking the vents the screen will just come across the outer rings a little👍
Great install vid fongpei
Thanks mate
To this day i haven't worked out who you are!!!
How did you end up lifting the headunit in the end?
It was quite simple, took me an hour.
I used a flat piece of aluminium i had laying around.
I had to carefully re-tap the threading on the headunit to screws i could find locally at Jaycar. I believe they are M3 x 10 (i will have to double check). Just be super careful with the tap.
Bolt the screen onto the alloy sheet with the M3 screws and bolt the 4 legs down about and inch lower. It sits PERFECT now
Great video.
Thanks! Love your content mate
Great video Jonatha.
I bought a lc 200 steering wheel for my lc 79 series, also only the buttons on the left is programable to the android radio, dont know if it has to do with the lcd functions on the lc200 that they are not compatable with the head unit. Any tips to get all buttons to function
Thanks mate!
Yes that's correct. Those buttons will be for cluster interface on the 200 which is not available on the 70. I also installed this exact same wheel on my mates N80 hilux and all those buttons do work with the N80 cluster interface... that tells me that all the extra buttons will need is to be wired in from the clockspring. If I had two cars together I could probably work it out. But no I haven't yet and don't really feel that I need more buttons at the moment!
Very well done Video.... 👍..Question, with the Joying Head Unit did you get every Button working both Left and Right side of the Steering Wheel with say Google Assistant and Answering Calls Sending Calls Playing Third Party Apps and Navigation..Cheers !!
Hi Jeff,
Yes everything which can be programmed is programmed. Some of the buttons there are for the 300 driver assist functions and cluster controls, so not applicable to our cars. I have voice control programmed via Google, volume up down, call buttons, previous and next buttons, mode (I've set mine to google maps). And cluster controls of course. Hope that helps!
@@JCYT Thanks Jonathon !!! Yeah that's the info I was looking for. Cheers !!
I understand that as I have a Kenwood unit I will need the additional harness. Have you a link as to how this is to be connected please?
Hey mate
I don't have a link to how it is to be connected. However, check the part number on the Aerpro website, they have more spec sheets on there.
@JCYT Please update on connecting cruise control to this steering wheel.
If you watched to the end, there are no issues with connectivity. Three of the buttons will need to be repinned, but the meantime cruise control is still fully functional. When I find the time I will do this and do a quick video.
great video mate
Thank you!
Jonathon, on the RHS buttons, above the cruise control switches, what do you did with these two switches ( looks like lane assist and cruise distance buttons)
Nothing, just left them. You could probably repurpose them, but i haven't tried to.
Mate , is this applicable to stock standard radios on the LXV8 ?
Yes it should be!
It looks nice but I am not sure about the roadworthiness.Did you check it? 4:15 oh ok, you are aware of that.
I can't see how it would be a problem but who knows with highway patrol in NSW. Kept my old wheel that's for sure!
Great vid i have a 200 steering wheel and the clock spring same as what you have done, i also have the two harness to hook up to a alpine 902df, i have the 4 wires k1 k2 illustration and ground now im lost can you help please
Nick
Cheers
Sorry for the slow response, i've been away.
Are your steering wheel lights illuminating?
I'm not familiar with Alpine units sorry. They may require a separate interface to interpret they key inputs
So I've connected the illumination to the wheel and it works and have connected the 3.5mm plug to the alpine head unit and plugged it to the decoder but conecting the k1,k2 wires to the decoder is the issue I can't work out where the go
Hi once again Jonathan !! sorry for being a pest ! With the Cruise Control, is that a factory fitted Cruise Control or Third Pary ?? The Reason I ask is my Troopy is a 2011 and I have a After Market Cruise Control with a OEM stalk switch unit, so I am trying to figure out if I can some how fitt the Steering Wheel setup that you have to mine?? Cheers again !!
All good mate
Mine is factory fitted cruise control. If you send me pictures of your cruise control connector at the clockspring I will have a better idea whether it will plug right in. Shoot me a message on FB 👍
@@JCYT Thanks once again Jonathan !! I think mine won't work as the Unit has the following setup... Stork control unit which than connects via 2 wires that then goes to a small box which is mounted inside the steering wheel also, ... I guess it's the Transmitter, then the signal heads down to another small black box tied up under the dash, which is right next to another large black box.
Clear as mud😃😃I think the only wire that I have is what they call the Horn Booster cable ??? that plugs in next to the Air Bag inside the Steering Wheel.
The Cruise Control unit is from a Company called Autostrada in Brissy.
Hi Jonathan, loved your video.
Bought the joying 11.3 and 300gr steering wheel BUT can't get all buttons to work. Did you get wheel to be fully functional
Hey mate thanks for watching!
Yes it's all working if you have swapped the clockspring and made the harness as per the pinout in the video. Have you programmed the keys in the joying? I have a batch of 10 harnesses ready to go if you are interested in one. Will be releasing them shortly
@@JCYT how'd, my son is helping me with install.
He did change clock spring and made new harness , and has program on joying unit he's getting values on to select what buttons do but left rocker and alot of the black buttons don't respond
@@JCYT Hey mate, how do I go about purchasing one of your harnesses? How much are they and where can I buy one? Thanks
Hi buddy where did you buy the sec harness plug from?
God video , where did you get the streeing wheel 😊
Hey mate link is in description. It's off Aliexpress
Hi Jonathan, hate ask again but still not clear if in your 79series your got ALL buttons on 300series wheel to work.
In your hilux vid install it looked the left rocker switch only changed the cluster but not functional on Joying unit.
I trying to find a scrolling function but doesn't seem possible
Hey mate sorry for not responding to the other comment. If you watch the end of the video, it will show which buttons will work and not work. The scrolling functions, lane assist and a few obscure ones are related to the digital clusters in the 300 and Hilux models.
Only half the keys will work - you should have volume buttons, mode, voice control button and the call buttons working. And of course the cruise control on the right side works.
@@JCYT yes ,looks like we have the same buttons working as you.
Was trying to find a way to scroll through things like your contacts or Spotify songs but without that left rocker switch working doesn't seem possible
@markdoyle3762 oh and also have left and right arrow keys (I think they're on the other side). I have them programmed to next song and previous song. They work for me.
I'm sure I can get the other buttons working, but I don't feel it's necessary to have the extra buttons.
Are you able to select phone contacts, would be handy.
Seems Ap is quite limited no favourites folder etc or haven't we looked hard enough 😅
How'd Jonathan, how would you get other buttons working,
Software or hardware?
Great vid!
Thanks mate!
Did you end up re pinning the cruise control to the correct functions to buttons?
Hey mate
No i haven’t had time. Something I will eventually get to. Once I do I'll be sure to update the post
HI again Jonathan, Question did you fit this with Cruise Control I can not seem to see it in the Video. If not will you be adding Cruise Control ?? Cheers!!
Hey Jeff, yes it's at the end of the video at 18:04. It was plug and play and all works 🙂
@@JCYT Ok, Thanks Jonathan !!! much appreciated !!
thanks great video but rather someone do this , I'm good a most things but hummm little be not sure on this
does it work on a land cruiser 100- 105 ?? i need to know if i could do the upgrade.
Sorry mate I have no idea
@@JCYT I have been working on this for a while now and your video gave me a lot more confidence that it is possible for a 100 Series. Only that I the early models have the 6-Pin connector on the clock spring, luckily there are 2 empty pins on that. What do you think, would it be possible to have a adapter from the steering wheel plug into just the Key1 and Key2? And would it be possible to run just the Key1 and Key2 cables through the clock spring into the head unit?
If so, how do I measure/find out which are the Key1/Key2 pins on the steering wheel harness?
Hi Could this steering wheel fit a toyota Landcrusier prado 90 series.
Hi mate sorry I cannot confirm but my understanding is all Toyota steering columns are compatible
Great vid
Thanks mate!
Good job!!
Cheers mate
Where’d you get the wheel from??
Hey mate it's from Aliexpress - please check the description it's al there
Wheely good !
hahahahahaha
Hey mate does the arrow keys and ok button work on the left side of the steering wheel?
Hey mate
No the arrow keys/OK are for the instrument panel on the cluster. I am doing some testing to see if i can get it working.
@@JCYT cheers.
hey jonathan can u give me a link to ur screen on the 70.... i want that screen in mine but in my country cant find one
Hey mate, here is the link. It's well over a year old now so they may have a newer model.
www.joyingauto.com/newest-high-resolution-1920-1200-android-10-1-double-din-car-radio.html
I've also done a full install on it too - ruclips.net/video/cvjAmXgpBAU/видео.html
thanks alot bro my 70 is just days away exciteddddd@@JCYT
Brother coolbox ım waiting
Cooldbox you can make ??
sorry mate i'm not sure what you mean
This steering wheel is OEM?
The base is OEM. All the buttons and the trimming appears aftermarket. But the quality is decent!
Did you end up sorting out the cruise control buttons?
Hi mate
Sorry been so busy with other projects. But the cruiser is getting some love next month. I promise will get the cruise control sorted and make a little vid in the later part of the year.
No worries mate. Thanks for the great vid!
Bro ! you should sell this as a plug and play for us I’m interested
Hahaha if there's enough interest I'd be happy to make a few kits
Count me in for one
Yeah, Jonathan tell us if you’re willing I’m still interested…
@@rockfossil9006 Hi mate
Please read the pinned post :)
android unit model?
Hey mate what phone holder you using ?
Hey mate it's a cabin crew phone holder. Don't recommend it for offroad use but day to day it's great!
@@JCYT thanks bro
Could it fit a hzj105
No idea mate sorry
I was good until 14:15! lol 🤪🤪 😁
hahahaha how unfortunate
There goes your warranty.
Dusty, at this point, i couldn't care less what Toyota thinks
@@JCYT I cant wait for the dashcam footage of the Castle Hill Toyota service manager when He see's that modification.
@@dustyfarmer Funny the N80 hilux i also installed the steering wheel on - it had a DPF failure and went in for a new DPF, they didn't bat an eyelid 😂 However they did break his catch can, steering yoke, left the battery loose and the e-boards are no longer working.... incredible 😅
@@JCYT Oh what a feeling.....Toyota !