HOW TO REMOVE RC TIRES / using boiling method

Second time boiling tires off the wheels and it worked again with no damage to the tires or rims. just be very very careful though!! "I did burn my thumbs" despite having thick rubber gloves on. Please rate, comment and subscribe for more.

[@Mr.Titanium1911]

Worked like a charm on my Cen Racing F450 tires and rims👌🏻

[@rcworxshop]

Fantastic 👍🏻 thanks for watching 👍🏻

[@jimmyplaysclash]

This worked a treat for me! Thank You for sharing.

[@rcworxshop]

Your welcome matey, thank you for watching and your feed back means a lot 👍🏻

[@TangodownNZ]

Very good. Somebody suggested steaming them?

[@rcworxshop]

Yes you can use an old or cheap veg steamer 👍🏻 it works just as well, probably much safer 👍🏻 thanks for watching matey.

[@Hellseeker1]

Looks like the Acetone overnight method might be best, it will save the foams too.

[@rcworxshop]

Yeah acetone method works really well 👍🏻

[@andrataylor6070]

I need to take some proline drag tires off the wheel...will it ruin my tire any?? Thanks

[@rcworxshop]

If I'm being honest they may go a little softer?

[@andrataylor6070]

Is softer better?? ​@@rcworxshop

[@rcworxshop]

I would say so for grip, but drag cars already tend to stretch these tyres just need to watch they don't over expand and rip off the new wheels

[@andrataylor6070]

@@rcworxshop ok Thanks

[@SlavaRC]

Cool hack bro!)🙏👍

[@rcworxshop]

Thank you buddy

[@nickwilliams6869]

Do you use a brush to get all the access glue off

[@rcworxshop]

It's just picks off 👍🏻

[@wbfletcher56]

Awesome tip!! Works great!

[@rcworxshop]

Awesome matey, thank you for watching 👌🏻

[@walterbobrowski4761]

Thanks! This let's me remove the tires from their rim that I don't like (offset hex) to be used on rims I do like (centered hex)!

[@rcworxshop]

Your welcome buddy, thanks for watching 👍🏻👍🏻

[@MaxeeOffroadRC]

Nice video my friend👍

[@rcworxshop]

Thank you buddy, much appreciated 👍🏻👍🏻

[@Hyper7pirie]

Nice one bud! 😜👍🏻

[@rcworxshop]

Thanks for watching matey 👍🏻

[@Sheldinator]

Xmaxx tires factory glue is cement

[@rcworxshop]

🤣🤣 and you'll need a huge pot to boil 4 in lol, thanks for watching 👍🏻

[@Sheldinator]

@@rcworxshop i tried this out left them there for a long time because the glue wasnt comin off, ended up burning the rubber off and the glue was still on !

[@rcworxshop]

Ahh man gutted, the next move it acetone in a tub over night

[@Sheldinator]

@@rcworxshop will have to give it a try. Would it damage the tire?

[@rcworxshop]

You'll need a tub with a lid just a bit bigger than the wheel place the wheel in but off the floor of the tub then pour just a thin layer of acetone in the bottom if the tub the fumes will do the trick over a night, as long as the wheel/tyre aren't touching the acetone they will be fine 👍🏻

[@elliotniznik6989]

First tire had giant hole in it. 😂😂😂

[@rcworxshop]

In the middle lol

[@tylerbates8198]

“Let’s see how we getohn”

[@rcworxshop]

Good gloves and make sure you pull the tyres off the rims straight out of the water, the hotter the better to break the bead of glue 👍🏻

[@davidrivero7943]

45 minutes later & they dont come off , your water must be different over there. In the MF Garbage all 4 tires went. Hit CHECKOUT & forget about it. Got Tea ? JaJaJa

[@rcworxshop]

Did you get the water boiling? And the tyres fully submerged? You have to be quick and peel the tyre off the rim whilst they are super hot "with thick gloves"

[@TangodownNZ]

@@rcworxshop don’t worry he sounds like a twat

[@MohamedKamel-qp7le]

تسييل لستك السيارة