Thanks for showing me how to crack one of these open! Mine was a later model with a silicone rubber hose routed differently. I suppose they had complaints. The reason mine was no longer emitting steam was limescale buildup in the two hose connections for the pump. Some careful cleaning with a 1,5 mm drill bit (making sure no scraps of residue remained to clog up the steam outlets) unclogged the pump and made the steamer work like new again! Why buy new stuff when you can repair your old stuff?
Sir, can you help me? My steamer has a problem with the button light, I need to hold it so tight. I think there's something broken inside. I want to open it to see
best thing if you have a bit of ability in opening things, a little know how in electricity, try and open it up. most of these things, when they assemble they are quite careless, when this tube is sandwich on some tight space , and as the hot liquid is passing in it, in due time they shrink and choked...
I have another iron from shimono steam iron I opened 4 screws from the handle and 2 screw top of the connection top plate but I could not open complete inside coil and etc I think it water tight sealed just like PVC pipe gluev
sometimes there are products , that are not maintenance friendly.. manufacturers dont want you to even take a simple troubleshooting if your unit gone defective. search a bit, there might be some tutorials that may give you a hint. how to open that. regards.
Similar Problem, Pipe was blocked by the upper case, just opening an closing solved it. Thank you! I think that rubberpipe is moving in the case because of vibration wich makes it go stuck at different places. I opend the case by screws liked showed but without drilling holes before so i could push the plastic a bit over it so it looks less damaged.
might be that the nozzle's hole are clogged. find a coat hanger wire, or small nail maybe, and declogged those holes one by one.or, might be the same problem as i've shown here. hope it helps.
Ate kayra, sa tantya ko po ay puncture na po ang hose, or sa ibang kaso po ay loose na po sa bandang joint nito. (kasi mainit na steam ang dumadaan diyan sa hose, at isang posibilidad iyan na mag crack sa katagalan at iyan ang posibling maging sanhi ng leak)
ate kayra, sana kong may marunong kumalas niyan ay baka minor lang ang problema niyan, gaya ng na twist lang o naipit ang hose. kung wala namang malakas ang loob na magkalas niyan(he,he) patingnan mo sa nag di di DIYers na mga friends mo (yung electrician na ordinaryo kaya iyan) simpling simply lan po ang pag kalas niyan at pag repair po. GOD BLESS PO.
the flexy hose are removable..it kind of plug in hose, after taken it off, they are rubberize , so in water with soap, roll it it both hand in the water will clean it. then rinse it . hope it help.
qouom,, practical theory bro... the heater heat the water and boils up and there it produce pressure, this pressure will push the boiling water through its connected tube and there it goes out as hot steam through its nozzle.
Awful video. Firstly what is the loud background music for? Secondly, no explanation as to what the problem is to start with. Thirdly, what is he doing using a drill to open a screw? Shall I go on ? 😮
bro, it might be that the hose get disconnected. if there is power , the heater is working, the motor is working, and the problem is not releasing steam, you might have the same trouble as in this video. A CHOKED HOSE. but before you do any inspection, make sure the unit is unplug..(that is if you have no knowledge in basic electrical.)
Thank you . Good video . I have the same iron , steam doesn't come out , light is working and the sound is heard, I'll try to open and check the hose then I 'll ask for your help
Thanks for showing me how to crack one of these open! Mine was a later model with a silicone rubber hose routed differently. I suppose they had complaints. The reason mine was no longer emitting steam was limescale buildup in the two hose connections for the pump. Some careful cleaning with a 1,5 mm drill bit (making sure no scraps of residue remained to clog up the steam outlets) unclogged the pump and made the steamer work like new again!
Why buy new stuff when you can repair your old stuff?
The only tutorial on this theme all over the web !!
Thank you Sir!
Sir, can you help me? My steamer has a problem with the button light, I need to hold it so tight. I think there's something broken inside. I want to open it to see
I have vertical garment steamer have 2 rows of holes, the upper all opened but the lower 3 holes have plastic clogged can i open them and how?
best thing if you have a bit of ability in opening things, a little know how in electricity, try and open it up. most of these things, when they assemble they are quite careless, when this tube is sandwich on some tight space , and as the hot liquid is passing in it, in due time they shrink and choked...
I have another iron from shimono steam iron I opened 4 screws from the handle and 2 screw top of the connection top plate but I could not open complete inside coil and etc I think it water tight sealed just like PVC pipe gluev
sometimes there are products , that are not maintenance friendly.. manufacturers dont want you to even take a simple troubleshooting if your unit gone defective. search a bit, there might be some tutorials that may give you a hint. how to open that. regards.
@@yononable it looks like complete water tight sealed it was purchased in Singapore 100 Singapore Dollar year 2000
hi. i have the same problem .. my PHilips steam and go doses not produces steam.. but it was okay before the time i used.. please help what to do.
If it vibrates and gets warm it could be the same problem as shown in the video. open up and look at it.
should reduce the volume of the song when you are talking.
Please inform the Guy who is Editing the video.
But
Thank YouVery much!!!
thanks bro..i'll do that..
Similar Problem, Pipe was blocked by the upper case, just opening an closing solved it. Thank you!
I think that rubberpipe is moving in the case because of vibration wich makes it go stuck at different places.
I opend the case by screws liked showed but without drilling holes before so i could push the plastic a bit over it so it looks less damaged.
congrats wt2009...thanks for watching.
mine the steam work only 2 hole..is it the same problem? hose problem?
might be that the nozzle's hole are clogged. find a coat hanger wire, or small nail maybe, and declogged those holes one by one.or, might be the same problem as i've shown here. hope it helps.
Super
How to fix leak from the head of a black & decker steamer handheld
Ate kayra, sa tantya ko po ay puncture na po ang hose, or sa ibang kaso po ay loose na po sa bandang joint nito. (kasi mainit na steam ang dumadaan diyan sa hose, at isang posibilidad iyan na mag crack sa katagalan at iyan ang posibling maging sanhi ng leak)
Actually bago pa po ito, galing po sa Qatar. Pag ka dating po ay ganun agad ang problema
ate kayra, sana kong may marunong kumalas niyan ay baka minor lang ang problema niyan, gaya ng na twist lang o naipit ang hose. kung wala namang malakas ang loob na magkalas niyan(he,he) patingnan mo sa nag di di DIYers na mga friends mo (yung electrician na ordinaryo kaya iyan) simpling simply lan po ang pag kalas niyan at pag repair po. GOD BLESS PO.
Ok po, thank you po
Sakto eto ung problema ng saken ngaun..tatry ko po iopen..
How to open to clean the hose
the flexy hose are removable..it kind of plug in hose, after taken it off, they are rubberize , so in water with soap, roll it it both hand in the water will clean it. then rinse it . hope it help.
hello sir , Can you explain to us the way the steam comes out?
qouom,, practical theory bro... the heater heat the water and boils up and there it produce pressure, this pressure will push the boiling water through its connected tube and there it goes out as hot steam through its nozzle.
@@yononable Thanks, I mean, why is the steam pushing out strong? Is there a motor to propel the steam?
@@qouomcompany979yes bro, there is a motor.
My steam iron stop releasing steam suddenly plzzzz help me
Awful video. Firstly what is the loud background music for? Secondly, no explanation as to what the problem is to start with. Thirdly, what is he doing using a drill to open a screw? Shall I go on ? 😮
please do...that shows you got no imaginations at all..see the other comments, you might learn from those.
My steam iron stop releasing steam suddenly plzzzz help me
bro, it might be that the hose get disconnected. if there is power , the heater is working, the motor is working, and the problem is not releasing steam, you might have the same trouble as in this video. A CHOKED HOSE. but before you do any inspection, make sure the unit is unplug..(that is if you have no knowledge in basic electrical.)
Thank you . Good video . I have the same iron , steam doesn't come out , light is working and the sound is heard, I'll try to open and check the hose then I 'll ask for your help