Very nice video, but a tip: use a propane torch to burn away all the carbon buildup in the holes on the core, takes a lot less time and effort then drilling them all out ;)
Agreed.. but on occasion I’ve had to use the drill but method as well. If left for long periods I’d becomes hard as a rock and no amount of torching will remove it. If maintained properly the buildup will not become like a rock, but we all know how that goes...
What he said...I use a wire brush with a long cable hooked to it and yank it through the inside a few times after the thing has been heated with a torch.
Way way back we took full system off and bunged one end up. Stood it on end and filled it with baking soda and water. Let it stand overnight and when emptied it was spotless. Brand new shining. New cleaning products like jizer stopped people doing things like that. Try it. I've never used anything better. A cup of baking soda for a full exhaust system from header to end can used to work great. Baking soda is very cheap..
yeh.....I dont drill out the holes, I soak mine in diesel for awhile and then hit it with a wire brush for about 30 seconds before repacking. Someone else said they hit it with a propane torch, gonna try that next time, sounds faster and cleaner than my diesel.
DasRusse on a dirty bike yes. The water will ruin the packing therefore lose power and become really loud. Could also get into the motor and cause rust. I always use a plug.
wow this video got thousands of views over the past couple of days. youtube be wild. idk where the traffic is coming from, but keep it coming. and subscribe for more lol
Wrapped with a fiberglass blanket-----which doesn't seem to add much 'quietness' to the exhaust and the blanket retains unburned oil until it is soaked----I do mine differently which leaves it quieter and lighter ----but I don't know how to do video's so you all will probably never know how this old pro does it.
no, you don't need the orange high temp stuff. silencers on 2 stokes don't get over a 100 degrees or so. It is important you use silicone that is oil resistant though, which the black RTV silicone that I used is, and its also good to 500 degrees
Linus H Forsberg i have oil coming from my exhaust. I just bought the bike. I was told that it has to be repacked. I said it seems to me like it would be running too rich if a fair amount of oil is dripping from the exhaust. Can you guys please give me some info. Thanks.
Was hoping to see how you wrapped with packing. Tight? Loose? I use a propane torch to burn that caked oil off perforated tube. Dont get too hot and be a bit patient. Took about 15 min.
What? I'm not the only person who cleans their bike before they work on it wow! Nice!
0:53 the cartoon running sound effect 😂😂
Very nice video, but a tip: use a propane torch to burn away all the carbon buildup in the holes on the core, takes a lot less time and effort then drilling them all out ;)
+1
Aaa burn. Then inhale it aaa no wrong. Dont burn. Weaker the products. And smells.
Kuruma Designs , or a wire brush
Agreed.. but on occasion I’ve had to use the drill but method as well. If left for long periods I’d becomes hard as a rock and no amount of torching will remove it. If maintained properly the buildup will not become like a rock, but we all know how that goes...
it's a lot easier to just hit it with a propane torch and scrub it with a wire brush.
What he said...I use a wire brush with a long cable hooked to it and yank it through the inside a few times after the thing has been heated with a torch.
or a pressure washer...
Joseph Ciske Oven cleaner and water is all you need.
Why is this so satisfying
Insert M80 into perforated silencer tube. Light fuse, take cover, that should clear those holes.
Amazing video, well edited, great camera angles, keep up the good vids 👍
Way way back we took full system off and bunged one end up. Stood it on end and filled it with baking soda and water. Let it stand overnight and when emptied it was spotless. Brand new shining. New cleaning products like jizer stopped people doing things like that. Try it. I've never used anything better. A cup of baking soda for a full exhaust system from header to end can used to work great. Baking soda is very cheap..
May the smoke be with you.
I only like two strokes because they are way better and the smoke and smell
Gehry wtcs
4CIdaho
Lkikkkkkkkpppppppppppppppppppojhgjghhhi
That CANNOT be the easiest way to clean the perforations out, a stiff brush and some gunk maybe?
Jonathan Tatler I don't even own a bike but I'd say try a pressure washer
You might wanna wash the dirt off with water first scrubbing it can scratch the plastic, paint and metal
A really well put together video.. nicely done.
Amo ese sonido del 2t❤
nice vid, but you didn't show us the most important thing :D
DiDoSvK repacking?
jonnen elämä ok
Rieska Poika ok
Pers aukko ok
Basil ok
yeh.....I dont drill out the holes, I soak mine in diesel for awhile and then hit it with a wire brush for about 30 seconds before repacking. Someone else said they hit it with a propane torch, gonna try that next time, sounds faster and cleaner than my diesel.
Very Nice Video !!!
whats the drill for cletaning the holes?
Amazing
Wait... Its not really a big deal if i get water into the exhaust, right?
DasRusse on a dirty bike yes. The water will ruin the packing therefore lose power and become really loud. Could also get into the motor and cause rust. I always use a plug.
wow this video got thousands of views over the past couple of days. youtube be wild. idk where the traffic is coming from, but keep it coming. and subscribe for more lol
stupidmoto I wasnt really even intrested about this but the video was so satisfying :D
Wrapped with a fiberglass blanket-----which doesn't seem to add much 'quietness' to the exhaust and the blanket retains unburned oil until it is soaked----I do mine differently which leaves it quieter and lighter ----but I don't know how to do video's so you all will probably never know how this old pro does it.
Lynn Thomas How about you tell us what the secret is then : )
I second that. Out with the secret lol
You could probably burn the carbon away from the inside tube with the little holes?
burn carbon? not possible lol
Hvguy ? ehm no, You can do it.
thats how you clean the inside of exhaust pipes...
SamD thats called oil not carbon
Is bad wool the reason the oil was leaking from exhaush?
BerteKa yea
0:49 it sounds like darude sandstorm :D
ahahehe lmao so dumb
fantastic video!
Why don’t you post anymore
I would use high heat silicone.
You don't need it. 2 stroke silencers don't get hot and the black rtv silicone I used is good to 500 degrees, but more importantly its oil resistant
Should have washed the rest of the bike while you had it opened up.
At this rate you might as well buy new pipe every season
Bro ever heard of contact cleaner 😂😂😂
Put less packing in for cooler sound and more power
Not true
Was u cleaning the holes out?
jesse allen yes
Josh Guitar81 why not take a wire brush and brush it
Josh Guitar81 or even a tooth pick or something
How the change the wool = you don't.
Poor Coyote he did
Any advice for cleaning with a solevent?
are you using high tempetature silicone for that seal?
no, you don't need the orange high temp stuff. silencers on 2 stokes don't get over a 100 degrees or so. It is important you use silicone that is oil resistant though, which the black RTV silicone that I used is, and its also good to 500 degrees
1:24 dude u can use an oxidric flame. I dont know how to spell because im italian sorry.
how often does this needs to be ?
Leo Casi 10-20 hours
Who wants a silent two stroke
ستمر
Or you could be like me the guy who rips the packing out when it's fucked and never replaces it
Nice video
Missing a jubilee clip..
Nice vid, tantk you for dise !!
*Nice vid, I subcribe you now 😉😃*
Cio😎
Sounds like it's only running on 1 cylinder
you're goddamn right
Naahhahhaah brooooo titts a fugen inline 4 jsjahahahfjdjdkflglc
Clean bike bro
Jack Wistrand thanks bro i work hard to keep ot clean
nice video
Blow torch the silencer, will get all the carbon out so much easily
Rm is awesome
you should use a 2 stroke plug not a 4 stroke plug
Angus McLay what does it matter, i usually just stuff a towel in it if i'm really washin it
yeah but they get so full of oil and the water proofing not the best
Hey man, what's the black stuff you used to seal the silencer back up?
Its Permatex Ultra Black RTV silicone
This video is funny😂😂😂😂
i often does this have to be done?
rm 250 ?
yes
and I drive Suzuki rm 250 and I am from Bulgaria
on my bike is fmf powercore 2
You guys need to get a dirt bike to understand
You don't wash a byke or something that way
Sempre bello cambiare la lana di roccia😂👍🏻
Hahaha I love this video
Now that some adderall bro. OCD much
nice video but ur premix is way too rich ur running oil out of the tail pipe and ur loosing hp
its amsoil dominator mixed at 50:1, so the premix is fine. Jetting is probably slightly too rich
It is never (pretty much) the premix, it is the jetting. Good quality oil at 32:1- 50:1 is the way to go.
Linus H Forsberg i have oil coming from my exhaust. I just bought the bike. I was told that it has to be repacked. I said it seems to me like it would be running too rich if a fair amount of oil is dripping from the exhaust. Can you guys please give me some info. Thanks.
Was hoping to see how you wrapped with packing. Tight? Loose? I use a propane torch to burn that caked oil off perforated tube. Dont get too hot and be a bit patient. Took about 15 min.
Can you post more pleas e
Детэйлинг прям
4 stroke it is then
opo kuwi klx opo ktm
Could of took a pressure washer to it
Who heard sksksks when he was sparing
U could just get a air compressor instead of the drill
La próxima vez no uses el taladro y la broca usa un cepillo de cerdas metálicas, en 10 minutos lo dejas impecable.
so ein dulli.. er hätte statt nen akkuschrauber auch ne drahtbürste und nen kompressor nehmen können..
howtobasic
Hello
Idk ab you guys but there is nothing more annoying than speaking the gunk off a 2 stroke exhaust
Could have used a solvent 🤷🏽♂️
Like what?
Just buy a new one and throw the old one in the bin.
Captain Win and waste $100 no thank you
POUYOYYGEI THE HECK YOU 😉 DON'T KNOW 🙏 😘♥️ HD
THATS MUD HAAHA
Like if you get the joke
Too bad RUclips doesn't have a content quality policy.
Are you fucking kidding me
why are americans so hooked up on carbon build up
skippy 1 I'm not, the more carbon there is, the louder it is!
skippy 1 he's about to send it, you wouldn't understand.
Sub
K
Tm
ngomong ae ganti glasswool
Much faster ,wire brush inside and out. Simples. 🤪
Ktm
raumum
n
1st comment
ur fired
Jaden Rosenberg no shit
Es una mamada querer limpiar el escape yo creo has de ser mujercita
Horrible