Underwhelmed. The MEGAPRO Original 15 in 1 Bit Driver in Hi Viz Orange. USA made, but bits are loose
HTML-код
- Опубликовано: 28 июл 2024
- amzn.to/3moL0fX This Megapro Bit Driver Screwdriver was recommended multiple times in the comments of my other bit driver videos. But i'm not impressed. The handle is hard and slippery. The EZ Guide Collar™ is variable in its resistance.
Am I missing something? Help me out in the comments. Thanks.
On Amazon:
amzn.to/3moL0fX
Looks a lot like my older craftsman ratcheting screwdriver. Same kind of carousel, same finger spots to pull it out, same/similar size handle.
When you were talking about bit insertion and (lack of) retention, I knew immediately the chamfer was bad. And then the scraping feel/sound of the bit moving in and out. Ick.
I've had one for about 15 - 20 years, and never had a problem with the bits being loose. The only problem I have had is the small slot tip broke, so now it is even smaller. I keep it in the house as my go to multibit screwdriver. Cheers Doc. 🇨🇦
I cannot speak to the "original" version, but I've used the ratcheting version for 8 years. The handle style is round with two rubber areas. I think Megapro pioneered that style of carousel bit holder. Then they started making them for Craftsman, Channel Lock, Klein, and others.
As an appliance technician, what really set Megapro apart, was their wide arrangement of Torx bits. I think the Klein #-in-1 had maybe just a T15.
Also, unlike Klein, Megapro's bits didn't rust on me after a week of work.
I use the Megapro Automotive ratcheting screwdriver as my daily use screwdriver. I really enjoy using it and have used it every workday for 2 years. The handle is very heavy though. I use Felo bits in it. I personally don't like the handle of their standard screwdriver.
We are supplied these at work. They hold up very well in an industrial setting. They aren't the smoothest or prettiest but they hold up the best; that is why they are so popular.
Love these videos, thanks for all the information!
It's one of those things where you just use it without over analyzing it's potential pros / cons on paper you may not have as much problem with it.
My Grandpa's garage was full of these drivers when he passed - I think he liked that Mega Pro was local to us here in BC. Two longer term use thoughts: the bits are quite strong (not as well fitting as a wera or snapon) but they do hold up to use in a drill - which I think the best way to use this thing is chucking it in your drill bag and having a fairly complete bit set handy plus a driver without packing it twice - I like the little bit of extra reach you get with these longer double sided bits. Also, as a Canadian I feel obligated to say you don't need that combi bit, just use the appropriate size robertson (generally 2) and you're in great shape. Pretty sure thats why the make a ph2/R2 bit actually.
You gotta get the automotive ratcheting model 211r1c36rd. It takes standard bits and you'll like it better.
Please try the hazet or gedore silent gear ratcheting screwdrivers would love your opinion on it
my current favorite is the Klein 15 in one ratcheting i like the size and grip of handle and the bit selector lets me stick bit back in handle, so I don't lose them
MegaPro....excellent tool!! love it!!
I have three megapros 1 of them is very hard to insert bits, the other two are perfect. I totally get your gripe on that. Same thing with the front collar, smooth part then stiff when spinning. Annoying yes but not a deal breaker. I typically spin it using my palm on the carousal and holding the shaft. They work for the very little i use them for on telecommunications cabinets but it is annoying at times. I’ve actually got a snap on ratcheting screwdriver with bits on the way to replace it.
I found one of these in an auction house that was being cleared out years ago. It was stolen off of a jobsite last weekend. very sad. I am a commercial electrician. Most in my industry use klein. I considered trying a different multibit driver but i just bought another megapro. best screwdriver ever.
I have to say that he is indeed right. I went to a hardware store where they had a variety of Megapros. I tested 3 of them and it appears to me that not all bits are made the same. Some are tighter than others. If you ever want to invest on Megapro, the only ones I would invest on are the shaft lok or the ratcheting with the 1 inch bits.
I have used the security version for 20+ years. I have had 2. Lost the first and I have had the second one for quite a while with no issues. I had the ratcheting one and lost that. Now I have the original version as well with no issues. With over 20 years of using 4 of these in commercial and industrial plumbing I haven't had any issues or failures. I don't carry it by the bit and I don't fumble around trying to use it. Sometimes it's not the right screwdriver and I grab something else but it has never let me down.
glad I didn't see this video before, I love Magapro screw drivers; I own about 4 of them; never a problem.
We're actually using this at work, not the hi-vis version tho. It's decent, nice to have when you don't want to carry a ton of screwdrivers. Ours seem to have a better fit on the bits tho, they're hard to get out of the tip sometimes. And if you lose the bits somewhere you can't easily replace them, which is a big downside with these double-ended bits. On the other hand you're getting a couple more sizes than you would with similar screwdrivers
That little bugger is closer to $50 over here in sweden. I really dident like it the first few months when i got it, felt massive amongst other stuff, but after a while i kept reaching for it more and more and now its my go to, sur ethe torxbits arent optimal for allen screws but its get you out of a pinch if needed and it all around works everywhere. Im sure there are a whole lot better tools out there but dont got alot of choices over here that ive found so far
When you were gripping the bit and dangling the tool until it fell out, my first thought was “that looks like a good amount of retention”. I have a lot of tools where the magnetic bit retention is just too strong. I can’t remember ever having a bit that I inserted fully actually fall outC but I’ve had damp or cold fingers where it was challenging to get the bit out.
Having to line it up to get it to slide in, though, no, that’s not OK.
Hello again Doc
Thank you for another Great Video. I think, I agree with you, this is a wash;) Again thank you
Try #1 Robertson bits for electrical terminal screws. You'll likely never look back.
Been used in Canada for a century. Welcome to America
@@62Cristoforo Wish Robertson (and Pozidriv) had caught on in the US... both are far superior to Phillips.
And if metrics caught on.....
@@lastbesttool Uh... well... yea... that would be outright Ponies & Rainbows! :)
I have several of the Megapros and I really like them. I have the orange one as well as the hex version and one other.
LBT - you might want to do a review of the Linus Tech Tips screwdriver. It's made by Megapro but it has their ratcheting feature. It's supposedly very, very nice.
The rolgear silent ratcheting mechanism is the best IMHO (have both Klein styles, Williams/snap on, PB, Wera, stahwlille and a bunch of others). And it has 3in flip bits. Costs a bit more than the megapro but less than the megapro ratcheting The rolgear mechanism is also found in the Gedore (which I have in duplicate) and Hazet (which I keep thinking about buying) if you want a bit driver (with or without storage for Gedore and with for Hazet).
The point of all these multibit especially ratcheting in my view is for people who work with their tools for a living, carry their tools on them and/or have a long walk to get another tool. Light and all in one and ratcheting saves your wrist. The same idea applies to a small kit for say overlanding (or in my case roadside repairs). I finally found some posidriv flip bits and was super happy. If I am honest with myself, I don’t turn enough screws where it makes a difference so I grab the appropriate size in non-ratcheting or an impact/driver if I have to do a lot of screws most often. But I did decide to buy all the various multibit and ratcheting ones anyone said were any good to see what I thought of them and tried them all out. Haha.
The Gedore and Hazet versions of the silent ratchet with bit storage in the handle looks ultra swanky, but man do they want some dough for it. Cheapest I could find the one that I'd want was $84 USD for the Hazet with silent ratchet, bit storage, and a quick change collet with removable extension.
The Gedore without the bit storage I bought for $18 from Germany.
You should check out the Lenox and Irwin ratcheting screwdrivers. They're the same driver essentially, just a different grip and bit colors. Don't let the fact that it looks like the Klein abomination fool you. They're designed a lot differently, slightly slimmer, and I like them. The Bit/shaft setup has a lot of engineering and milling put into it, way beyond the Klein or any other version. I have the Lenox version and I think It's pretty nice.
If you're not stapling up Romex and doing smaller cables or low voltage cables, you should check out the Surebonder TRIGGERFIRE Cable Tacker Staple Gun. I was about to get the klein stapler you have to try out to see if it was worth getting more of for our crew at work, but then I stumbled upon the Surbonder on the net. It's got a trigger on it which means you can squeeze it and cock it, then line it upon the cable/wood then use the trigger to set the staples. It also will operate like a regular stapler. Got one, tried it out, worked beautifully. Bought four more for the crew and haven't had any trouble out of them. Oh and the best part is, is that it'll work with Arrow T59 insulated staples, which I've had success finding at Lowes. Even though I went and found a bulk deal on eBay for some T59 staples.
Agreed I ran a knife around the edge at 45° angle
could you test out the megapro ratcheting screwdriver
I like to have this on hand with the Hex Keys / Allen Keys bits. But it wouldn't be my main screwdriver I agree.
I liked the scale. You were right thinking that the tenth function on the calipers simply rounds thing off, adding to the errors. One of the drawbacks of cheap digital gages. Given that, SO's bit at .250 can be a product of the calipers. Do you have a calibrated micrometer that you've developed a feel for? That would be the way to do. A mechanical mic with a friction thimble would even earn a few competence points.
I have neither version; however I bet that it comes down to personal preference.
Huh. I've got a couple of Megapro drivers and really like them as a general-purpose driver for my go-bag. Wonder if you just got a poor example, or if their QC has decreased over the years.
You should do a top 25 tools everyone should own video. Or best of the year
That's been suggested. I'll consider it since I'm old and many, most even, of my viewers are much younger. Thanks for the suggestion.
Generally I find that I don't use the ratchet on ratcheting screwdrivers that much. I also would rather my multi-bit drivers take standard 1" by .25" hex bits not manufacturer specific bits. Then if any bits get lost/damaged or I find a specialty bit I need on the regular, they can be swapped from a standard bit set. That's why I prefer the Klein 14-in-1 adjustable length. Bonus it can share bits with an impact driver, and the shank from it can work as an impact extension in a pinch.
I have a mega pro with security bits, it’s ok, but it’s appearance differentiates it from my others screwdrivers.
I like orange tools also because I have a hard time misplacing them.
I like the combination bit on Klein but I think a square/robertson works very well too. Philips is a disaster of stripping proportions though
Megapro needs to keep up with the times and improve the ergonomics of the handles. A locking bit collar would be nice improvement as well.
It looks great, and the carousel seems like a good fit. Too bad they opted for ABS plastic. Is it missing a magnet in the tip to secure the bit? Looks like the only thing needed to lose a bit is a screw that gets a bite of the bit.
There's no magnet in the tip, the bits are held in place with a ball detent
The rotating collar seems like a pointless gimmick. I prefer a softer grip, like the klien.
With a ball detent, it doesn't need to be exactly a 1/4 of an inch
I don’t know, I think the Megapro are pretty Excellent overall. Beretta9MMUSA Sr.
Snap on has a 10 inch pry bar it's new I think 30 + bucks seems like a great deal to me!
It looks like a demolition slotted screwdriver with 1/4” shaft. I’d like to see one in person. Thanks.
@@lastbesttool snap on website home page featured tools
@@dombond6515 Just looked at it. Called my SO dealer to see if there were any on his truck. It's on my list! Thanks.
@@lastbesttool I order 1 as well. Thought is was a screaming deal and a great size.
@@dombond6515 Just ordered one with green handle. No ETA however.
Every time I buy Klein, I'm disappointed. I'm very happy with my Megapro automotive. My bits don't fall out and I can't pull the bit out just with the weight of the tool. The Megapro is so much more solid than my old Milwaukee ratchet screwdriver.
With my mega pro bit driver the bit are in the tight super tight.Quality must be lacking.
What you're "missing here" is their ratchet mechanism. Nothing special about the non-ratcheting one, but their ratcheting ones are among the best.
Have both the standard and the automotive magnetic ratcheting model. Automotive is much better, uses standard bits $35. Both are bulky but are pretty good when you only want to carry one screwdriver.
Why didn't you get the ratcheting automotive? The hole point is to have a ratcheting screwdriver
They were handy with the tamper proof bits back in the day. Now they are completely useless with all the other brands making better versions.
Yes, you are missing something. You got the wrong model if you're comparing apples to apples. You should have gotten the Megapro Automotive ratcheting screwdriver.
Can you try to check out the Linus tech tips (ltt) screwdriver when it comes out? It's a ratcheting screwdriver and they partnered with megapro for their carousel
Man, for the money it does look kinda underwhelming.
For me it isa a fail ...maybe i m wrong
That handle looks like it was specifically designed to deter people from handling it - hard plastic with rows of little knobs all over it? Really?
Yeah I'll take my picquic's over that any day of the week. Personal preference though.
That's definitely a lead to other people tool ☹️
Made in USA doesn't mean the greatest tool. I have some old HKR "Made in Germany" blue screwdrivers which are absolutely crap, the brand still exists
Gedore, Hazet, Witte?
@@salty5402 no no all of these are good. Found them its HKR Screwdrivers, Made in Germany, 100% crap
HKR mostly makes tools for the more budget brands in Germany like Athlet, Brüder Mannesman etc.