Invision Dual Monitor Arm Desk Mount MX400, Review, Unboxing, Tutorial, Setup
HTML-код
- Опубликовано: 2 июл 2024
- Invision Dual Monitor Arm Desk Mount MX400
for 19 to 32 Inch Screens - VESA 75 & 100mm Stand Desk Clamp - Tool-Free Height Adjustment with Tilt Swivel Rotate - Increased Load Capacity from 2-9kg (MX400)
Links (aff)
UK amzn.to/35Xrfqt Global www.invisiontechnology.co.uk/
00:00 Intro
01:25 The packaging
02:15 Unboxing
04:00 Basic tutorial
07:35 The install
11:52 Mounting the monitors to the Dual Monitor Arm
13:15 Cable management
15:55 Finished the install
16:00 The different features between the MX400 and the MX300
18:07 Demonstration of turning one of the monitors sideways
18:42 The verdict
19:33 The end credits
AFFILIATES & REFERRALS
►Amazon UK amzn.to/3oa0zI2 Global amzn.to/2T8bwLH
►Scan.co.uk tidd.ly/31LF0Ec
►OcUK Affiliate Program
www.overclockers.co.uk/?tap_a...
►TESmart www.tesmart.com?sca_ref=1207895.nJJznIgcHu
►Ipvanish www.ipvanish.com/?a_bid=48f95...
►PureVPN billing.purevpn.com/aff.php?a...
►Printerinks tidd.ly/3o9mpuS
►Freepik tidd.ly/31lqlPJ
►eBay rover.ebay.com/rover/1/710-53...
►eneba tidd.ly/3jUTXJS
►CheapHostUK cheaphostuk.com/portal/aff.ph... 10% discount code use “Yorkies”
►Teckin uk.teckinhome.com/collections...
If you would like to support the channel:
Patreon: www.patreon.com/bePatron?u=58...
===================================================
Disclaimer. By following my advice you do so at your own risk.
Please do your own due diligence and research. ===================================================
FOR BUSINESS INQUIRIES
yorkiesbitsandbobs@gmail.com 
Наука
Really helpful guide. It was a great assistance in me setting up mine. Cheers mate!
Thank you Irish for the feedback
You killing it with the video and the music was fire 🔥 👌
Thank you
Thanks I'm shopping for a monitor arm right now, this was very helpful.
Glad I could help!
Really handing video, appreicated the full install sped up to check certain points. Thanks!
Thank you and consider subscribing thank you
Lovely review thankyou !
Thank you Shir_lley for the feedback
Just got the MX200 - helpful instruction video - as the instructions that come with it aren't great. Many thanks - really helpfull. Seems like a good product.
Glad it helped
Great work lad
Thank you Drxwskii
Just ordered the MX400 for two LG27" monitors. Thanks for the review!
Thanks for the comment and good luck
I'm thinking of ordering for my 2 x 27" monitors. Interested to know if the arms overhang the back of the desk? My desk is almost flush to the wall and I want to be able to push the screens towards the rear of the desk so they are no right in my face. Is this possible? Or how much would I have to pull the desk forward. Thanks in advance.
@@dermotdesmond2775 Yes the arms over hang the desk (more so the lower the monitors get). I have about a 13cm gap between desk and wall.
@@dishydish many thanks. Very useful info
Thank you for that in depth review. One thing i could have done with is possibly seeing what full range of movement the mounted monitors have once installed. For example, how far forward they can be, if you can space them apart etc..
Thanks for the comment Jordan if I get time I will do an update for you
Good to know it works well.
Yeah they work very well
Thanks for the detailed intro. Just wondering if the arms can be moved up and down for a vertical set up for my two 27" monitors?
That would be awesome for me due to the limitation of my room and a desktop with big 42 inch in the middle, and 2x27" on the right, and 2x15" on the left - I'm not too worried about 2x15", but not sure if MX400 can support vertical 2x27"...
Yes, both arms can rotate
Bedankt
Wow! Thank you very much Shir_lley
Really great review, thank you! I do have one question.... in your last scene of the video, would it be possible to bring the monitors more down so they are closer to the desk?
I am just asking because my desk is also very close to the wall and I was wondering if the big arms would need more space in the back to bring them more down?
Or would they then maybe come closer to the front?
It's on an elbow joint so you can just push them down without swinging them back and forth
@@YorkiesBitsandBobs I see. That sounds good, thanks a lot for the info.
I'm making a short video showing you what it can do
Great review. Question as many others seem to have.. just got mine, and can’t figure out how to get them to go up and down for the life of me…. Any help? :(
Inside the elbow there is a allen bolt that is your tension bolt
Hello great review just a quick question do u know if the the monitor vesa plate plate is detectable from the arm thanks in advance
Not sure about that one, but there is an Allen key tensioner for tilting the monitor up and down I don't know if you can undo it fully
Thanks, very useful tutorial. There isn't any USB 3.0 cable in the box, right?
No USB cables
Really useful video. Thank you. I have just bought the Mx200 for my single monitor. Not sure if it’s me but I’m having issues adjusting the height. Tightening / loosening the Allen key seems to make no difference. Anyone have experience of this? Thank you 😊
I'm glad my video helped, There is a tension bolt tucked inside you need to adjust that
Thanks for the video, been checking this product but would like to see it first before I purchase. 👍🏻
Thanks for the feedback and glad to help
I have a question. As I lost one of the L shape joints, how is the drill version of mounting this looks like?
What clamps/ screws do I need?
Sorry SergioFLiso not sore but I think they are 4m but you should contact Invisison i'm sure they will help.
here is a list of standered sizes.
VESA STANDARD HOLE PATTERN SCREW SIZE MONITOR WEIGHT
FDMI MIS-B 50 x 20 mm M4 x 6 mm ≤ 4.4 lbs / ≤ 2 kg
FDMI MIS-C 75 x 35 mm M4 x 8 mm ≤ 10 lbs / ≤ 4.5 kg
FDMI MIS-D 75 x 75 or 100 x 100 mm M4 x 10 mm ≤ 30.8 lbs / ≤ 14 kg
FDMI MIS-E 200 x 100 mm M4 x 10 mm ≤ 50 lbs / ≤ 23.7 kg
FDMI MIS-F 200 mm increments M6 x 8 mm or 10 mm;
M8 x 15 mm ≤ 250 lbs / ≤ 113.6 kg
Hi, what is the difference between the MX900 & MX400 arms? I have 2x 27-inch monitors I'm looking to mount but I want them as close to each other as possible once mounted.
The main difference is the weight, the MX900 has a Weight Capacity of 3KG to 12KG and you can mount 22-32 " monitors and the MX400 Weight Capacity of 2KG to 9KG 19-32"
Halo Sir
I currently have HP M27f and i want to use the invision MX400 arms, are there any adapters to use with the HP M27f and Invision MX400
Greatly appreciate your reply
I will look into it for you
How close can the monitors get to the wall? My desk is right up against my wall so don’t want the monitors to be extending too far out!
About 5"
Are the screws for the monitor with in the box? Or do I have to buy them extra?
Hello Vincent they should come with the mounting bracket
Is there any way to adjust the height because it’s a little too high for me so I’d like to lower it a little bit
Yes, it can go up or down just push down when you have the monitor attached
@@YorkiesBitsandBobs Did you have any issues moving the arm up or down? I've bought one of these and no matter what I do with the alan key and the pressure point I can't get the arm to lower. monitors are way above my eye line. It feels like If I put any more force onto the arm it'll damage my desk or arm before it moves.
@@variousominousdrones1693 I just tried them both and they move up and down with no issues, the only thing is that when you move them down they move to the left or the right as your move them down so then you have to realine them. Not sure why users do not move down
@@variousominousdrones1693have you succeed ? I want to lower it too but it’s just stucked I feel like i will break it
Got these arms the last couple of days. My monitors mount at different heights though, one is top mount and the other central. I won’t ever be able to get these arms to get the monitors to the same height though will I?
Any advice would be greatly appreciated.
It's just a question of adjsting the tenshion on the arms
Have you watched this video ruclips.net/video/kZhCwWMwzbM/видео.html
Thanks. I couldn’t get this to work. The arms seemed almost locked in place.
@@nigelmcdonald They do not need a lot of pressure to push them up or down
@@YorkiesBitsandBobs I’ve managed to get them to stop moving, but now if they are the same height it’s too low for my eye line and there’s a huge gap in between them. Worth seeing with the manufacturer if they aren’t meant for top mounted monitors?
Wondering about the height adjustment. Can you do that easily?
Yes, if it's too hard to adjust there is a screw tensioner
@@YorkiesBitsandBobs Thanks for reply. Isnt it possible to move up/down without the screw?
@@MegaBerberber Yes it is, all I am saying is if it's too hard to move the tension my be too high
@@YorkiesBitsandBobs Thanks a lot!
Can i adjust height of montor induvidualy ?
Yes you can
I have the same one but Im not able to adjust the tilt angle.... it's to stif and it won't move.. how can I do it?
You need to use the Allen key, there are tension screws, depending on what you want to adust it can be the neck or the arms the ones on the arm under the elbow and the ones on the neck are on the side
@@YorkiesBitsandBobs yes, I'm using the allen key that the instructions state I should use, but the screw won't move not even an inch, and I'm doing it clockwise to the way the plus sign is... nothing happens, so don't know maybe I really have to use all my strenght 😅
@@sofiaromero7749 I'm not sure then I know it was very stiff for me, it might be anty clockwise, it you cant do it contact the seller, let me know how you get on
Hey, is there much of a wobble from the monitors?
No only if you wobble the desk and the it's only a small amount
Can you adjust the tightness of when it bends left and right
I don't think so
@@YorkiesBitsandBobs thank you one just feels looser than the other but maybe because ones bigger than the other
@@harrywheatley7090 It would have been nice it you could adjust it.
@@YorkiesBitsandBobs yeah definitely just to tighten it up otherwise it’s a brilliant product, thank you for the tutorial really helped me out
@@harrywheatley7090 Thanks for the comment Harry
Won't turning the monitor damage the HDMI cable?
No, as long as you give it some slack
@@YorkiesBitsandBobs Well I bought these arms now. They have sat in the box for a week, and I am just getting up the courage to take my desk apart and do it LOL. It's not easy to get behind my desk and I will have to pull it right out for me to do it.
can you change the height of the monitors ?
Yes of course you can the go up as well as down
@@YorkiesBitsandBobs ok thanks
Hello ,can you help me please ? i have bought one and i canno't found how can i adjust the height ? thanks
You should be able to grab hold of the monitor and pull it up or if it is too hard there is a tension screw in the elbow joint you can undo that to make it easier
@@YorkiesBitsandBobs oké thanks but i would like tu down the 2 monitors but when i tried to just moove the higher arm it return to is basic positions right after
@@iblod1116 Yes that is because you need to tighten up the pressure screw, if it's to loose it will slip back down again
@@YorkiesBitsandBobs oke thanks for help il will try tomorow 😁
@@YorkiesBitsandBobs is the screw below? Because i talk about up or down the high arm and not only the screen
I only wanted to take a quick look at install process but instead I had to watch you uninstall the damn thing for 3 minutes in a mess of wires, other devices and finally when we got to install part it is fast forwarded with the camera not even zoomed in and often blocked by body parts. What a waste of time.
Hello anhphemeral and thanks for the comment, my problem is if I make the video too long no one watches it if I make it too short they complain that I did not show the part they needed to see, it's hard to get the balance right