The inner spindle bearing is national B-2110 The yellow seals are Spicer 41784-2 U joints are Spicer SPL55-3X The big outter seal is 50491 The dust seal is 50381 And the inner seal for the axle is Spicer 2019816
How can I tell between Dana 50 and 60? I found a 2001 f250 with a good deal but idk if it’s a 60? Also why is the 2005+ axle better than the older models?
Napa, any parts store just tell them any f250 inner spindle bearing, but not a super duty it's listed as a non serviceable part on a unit bearing, but they are the same bearing in dana 50 or 60 on the older front ends.
MAN I NEED YOUR HELP BAD I EONT HOLD YOU LIABLE FOR NOTHING BUT I NEED SOME ADVISE... I HAVE A 50 ON MY FORD EXCURSION.. I STRIPPED EVERYTHING OUT AXLE SEALS EVERYTHING EXCEPT THE BEARING ASSEMBLY AND I BOUT NEW ONES.. SO RIGHT NOW IM RUNNING ON NOTHING BUT MY BEARINGS NO INNER WORKINGS... I THINK ITS FINE HOW BOUT YOU.?
Renegade.... thank ya.. for your reply... that means alot 2 me.. I'd like 2 leave it alone .. completely stripped down.. just remove the rest of the pumpkin gears.. he he hollow axle.. I have no need for a 4x4 or the stress of upkeep and maintenance... knock on wood I have no need for a 4x4.. if I do ill call a buddy or rent a rig...etc.. or get a running start at it.. haha.. anyways I'd like 2 leave it as is if I can get away with it... I can work on vehicles have been for 41 years.. but don't have much experience in 4x4 hubs.. thanks.
The inner spindle bearing is national B-2110
The yellow seals are Spicer 41784-2
U joints are Spicer SPL55-3X
The big outter seal is 50491
The dust seal is 50381
And the inner seal for the axle is Spicer 2019816
Great video brother. Precise.
Yeah I'm in, doing some homework for a one ton swap myself, thanks for the info
AWESOME videos
Very helpful
Good call on the spindle needle bearing. But all the B-2110 I see online are not caged.
How can I tell between Dana 50 and 60?
I found a 2001 f250 with a good deal but idk if it’s a 60?
Also why is the 2005+ axle better than the older models?
30 vs 35 spline
@@aceroutly5670 inner or outer?
Follow up vid?
Is there a part 2 or more?
Is there a kit for the bearings and seals or did you purchase independently?
There is a kit for most of it
Is there a part 2 to this part 1?
So if you leave your hubs locked then the caged needle bearing around the axle wouldn't be in use at all correct?
The bearing also keeps load off the knuckle seal, so yes, but it would shorten the seals life
Hi i like your video. Part numbers would really help.
I put the numbers in the comments
Did you end up replacing the hubs and axle shafts?
Part numbers if you could. The dust seal would be great as it seems to be some mysterious part.
I have the numbers in the comments
Where can I get that caged needle bearing ?
Thats what I want to know
Napa, any parts store just tell them any f250 inner spindle bearing, but not a super duty it's listed as a non serviceable part on a unit bearing, but they are the same bearing in dana 50 or 60 on the older front ends.
The numbers are in the comments B-2110
You got a parts list with numbers for seals, bearings, and u joints???
I committed the numbers in the comments
Yeah... $6.00 ball joints do NOT last. Any weight whatsoever in the truck, and they are shot in 6 months. Experience...
Great stuff! Instagram?
dont need the outer hub seals if your not using the vacuum hubs.
MAN I NEED YOUR HELP BAD I EONT HOLD YOU LIABLE FOR NOTHING BUT I NEED SOME ADVISE... I HAVE A 50 ON MY FORD EXCURSION.. I STRIPPED EVERYTHING OUT AXLE SEALS EVERYTHING EXCEPT THE BEARING ASSEMBLY AND I BOUT NEW ONES.. SO RIGHT NOW IM RUNNING ON NOTHING BUT MY BEARINGS NO INNER WORKINGS... I THINK ITS FINE HOW BOUT YOU.?
Should be fine as long as the hub bearings are fine and don't become contaminated. Would repair properly when possible.
Renegade.... thank ya.. for your reply... that means alot 2 me.. I'd like 2 leave it alone .. completely stripped down.. just remove the rest of the pumpkin gears.. he he hollow axle.. I have no need for a 4x4 or the stress of upkeep and maintenance... knock on wood I have no need for a 4x4.. if I do ill call a buddy or rent a rig...etc.. or get a running start at it.. haha.. anyways I'd like 2 leave it as is if I can get away with it... I can work on vehicles have been for 41 years.. but don't have much experience in 4x4 hubs.. thanks.
😬 dealing with the same on my 04 60
Full rebuild?
@@renegaderiders9289 what happened to the rest? Start out like a phenomenal series and died after part one