Pontiac Vibe Or Toyota Matrix Spark Plug Replacement
HTML-код
- Опубликовано: 10 сен 2024
- Today i will teach you how to replace your spark plugs on your Pontiac Vibe or Toyota Matrix
Here is a link to the spark plus with my affiliated Amazon link
amzn.to/2LqWgGK
Check out the NEW MERCH!!
IF YOU HAVE ANY QUESTIONS JUST ASK!
** If the video was helpful, remember to give it a "thumbs up" and subscribe. **
Follow me on INSTAGRAM
/ falcons_garage
Twitter.
/ falcons_shop
Garage's Facebook
/ falcons-performance-an...
Facebooks Hobbies
/ falconshobbies
My Gaming Channel.
/ @falconsgaming
Disclaimer:
Due to factors beyond the control of Falcons Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Falcons Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in my video. Use this information at your own risk. Falcons Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Falcons Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Falcons Garage
#misfire #falconsgarage #sparkplugs
You need a 14mm spark plug socket for the 09-10 vibe 1.8
That's a great video. Clear and to the point with good video.
Thank you for helping me save a bunch of money on my 2006 Vibe with original plugs at 285,000 miles. (My plugs looked much worse than those, hahaha)
I just fixed my AC refrigerant and actuator!
Next it’s the spark plugs! Weather permitting should be tomorrow.
Good video and easy to follow! Proper tools and bolt sizes
Good luck!
Falcon's Garage
Yeah thanks! This video is great and the clearest one on the tube!!
Thanks
Hi. I'm a machanic from Slovenia 🇸🇮.
I'm a new subsscraiber. Great Chaneel 😎👍
Thanks for your help. I was able to change my spark plugs myself. Although they were preset.
Thank you very much for video.
You are welcome
If you see oil on the coil is it necessary to replace valve cover gaskets??
Good question I was assuming so, did you research this?
Thank you very much.
Welcome 😊
Thank you
Welcome!
perfect thanks
You're welcome!
Ty bro
Thankyoun for this video
I got a 2010 Matrix 2.4L. What is the torque (Nm) for the installation? Thx
Hey I'm getting a p0302 after the herricane and driving through puddles. Doesn't that sound like a wet sparkplug to you? It starts up, bit you feel vibrations
thats a misfire on #2 cylinder .. check that coil/plug etc
Hi.. How to fix codes P1065 and U0426 in nissan almera classic please?
You replaced autolite iridium with ngk platinum. oem calls for iridium, but those ngk's are probably better than any autolite brand.
autolite are the worst
Really wish you would have shown the rest of the job. I know it seems simple for you, but for someone who has never done it, it would be great to see the entire process just to make sure I can follow every step. I have a 2006 Vibe 1.8L with 121k I just bought and it’s never had the coils replaced. WHAT ABOUT THE PLUG WIRES? Do they need to be replaced as well? Thanks man!
I really wish people would not be rude leaving comments. As you said you have never done this so If you have question I’m more then HAPPY to help. SMH. Be nice to people and people will be nice to you.
With that been said. This car HAS NO WIRES witch is why I didn’t talk about it in the video. This car has boots on the coils witch only need to be replaced IF they are broken. And if your replacing the COILS the BOOTS come with it.
@@FalconsGarage he wasn’t being rude, jus stated what his opinion on the way you choose to edit your videos, if anything YOU are being rude so YOU should maybe read the full message and try to understand TONE a bit better eh?
@@FalconsGaragehis comment did not come across as rude to me.
If you need to see more than that, You should not even lift the hood. BACK AWAY FROM THE TOOL BOX.
This video is so easy to understand. But im.not understanding how you can see a spark plug is bad.
by looking at the tip .. could be dirty .. corroded etc
What is the calibration that the spark plug should have?
Gap is 0.043 for a 07 matrix 1.8 Litre
Gap is 0.043 for a 07 matrix 1.8 Litre
Hi there boss. Today 10/27/19 I did my brother-in-law rear brakes. As I open the hood I noticed that his 2009 Pontiac vibe had a leak around the valve cover. I then proceeded to removing the plastic cover on top of the valve cover. Now I removed the 4th plugs left to right and it didn't want to come off. I decided to push it in and move on to the next to see if the car valve cover gasket was leaking oil in to the spark plugs. Nothing when I removed the next one. But when I put everything together I told my brother-in-law to turn the car and and feel the brake. His car check engine light came on. Did I do anything wrong or by gently trying to remove the 4th one cause it to get damaged? I have been working on car for a very long time and I never ran to this issue. Any opinion will be greatly appreciated. Gracias jefe.
was the key turned on at all while you were doing the job? what codes did it get?
@@FalconsGarage The Key's weren't on the ignition switch. I disconnected the battery ground and had him install it back in an hour and it fixed the issue. Thank You for your quick response. Liked and subscribed 👊👊👊👊
Thanks for the video. FYI the Amazon link did not work for me.
Thanks .. just cheeked and it worked on my end
1