I've owned a Murphy bed with a spring mechanism like the one he uses. It's only a matter of time before those springs break. When one breaks at 2AM you'll research and buy a hydraulic mechanism
WD-40 is a metal cleaner, not a lubricant!!! They sell lubricants as well. Remember you can get the squeaks out of springs and whatnot with WD-40, but they might very well start to rust if you dont add a little oil afterwards.
Saludos desde Ecuador me ayudar con la cotización de los herrajes o kit de las tres versiones q tienen como es también para cama escritorio horizontal??, gracias
3:50 wouldn’t it be possible to have a (secondary secure locking) mechanism that can release the load on the open bed frame? *i’m probably thinking of a variation on a ladder mechanism with an extended lever that you pull in multiple steps (eh..)
I think my "gas struts or gas springs" on my horizonal murphy bed/desk are not working. Bed is VERY HEAVY to lift up. so is there anyone in Honolulu who can install this in my Murphy Desk/Bed?
The idea is brilliant but the cost puts it out of reach for many people. Please consider reducing the cost. Remember even though it's a murphy bed, it's still just a bed.
That price is just outlandish !! There's not 20 percent of that price in materials. You're hosing the buyers and anyone that has a good idea of how to build a concealed bed without such a costly item should put up their own posting for us to see. And then $59.00 for shipping !?!?!? I've gotten a crate engine delivered for less....
Good explanation and a stable mechanism buuuut.... Even if i had the money, just nope, to expensiv 300 would be the max. And wd40 is not a lubricant its the opposite a lubricant remover. It does provide a lybrication for a short time paradoxically but it destroy the original Lubrication. Still enough good lubricants out there for heavyloaded slow spinning bearings. Have those bearings a cage or are fully loaded with balls?
HELP: I have the same system... My springs are opening in opposite facing opening. the hook on one end is facing downward and the other end, its facing upward. So I really cant just pot under the frame holes. one of the hook has to be on the top of the hole.....all the springs are like that.. all 16 of them...
I question the logic of MurphyBed to leave it to the buyer to install the springs. Murphybed couldn't manufacture this mechanism with springs installed? looks much easier to install them than IRL. MY Knuckles took a beating.
Your depiction of putting on springs and taking them off the mechanism is ludicrous! No it’s not easy and they don’t “pop on and pop off” as you want us to believe. I’ve had 2 handymen in the Chicago area flat out refuse to touch your product when offered the job. What does that say about your product?
If the mechanism doesn’t have the face panel attached to it then it is easy with a little finessing you can get them into place pretty fast, if the panel is installed then yes it’s very difficult to install them that’s why you need to remove the face panels from the mechanism, un tension thé mechanism and install or remove springs.
How about I fly you in to build my Murphy bed and pay for your accommodations? That way it would only cost me 4-5 thou. Would you shave your head be nice and put the mattress in place? Or does that cost extra?
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
I've owned a Murphy bed with a spring mechanism like the one he uses. It's only a matter of time before those springs break. When one breaks at 2AM you'll research and buy a hydraulic mechanism
the eBay link doesn't work anymore. can you reply with the new link for the mechanism you recommend? thank you
WD-40 is a metal cleaner, not a lubricant!!! They sell lubricants as well. Remember you can get the squeaks out of springs and whatnot with WD-40, but they might very well start to rust if you dont add a little oil afterwards.
Very helpful. He explained this perfectly Thank you
Hi, can the bed be higher off the floor though? So many I see are like 6 inches from the floor
Can you spring system be adapted to any Murphy Bed? I use a "purple" mattress which is heavy to lift?
Saludos desde Ecuador me ayudar con la cotización de los herrajes o kit de las tres versiones q tienen como es también para cama escritorio horizontal??, gracias
Where to buy? Link not working
3:50 wouldn’t it be possible to have a (secondary secure locking) mechanism that can release the load on the open bed frame?
*i’m probably thinking of a variation on a ladder mechanism with an extended lever that you pull in multiple steps (eh..)
I think my "gas struts or gas springs" on my horizonal murphy bed/desk are not working. Bed is VERY HEAVY to lift up. so is there anyone in Honolulu who can install this in my Murphy Desk/Bed?
Hi, the ebay link is not working
Ebay and amazon have them for around US $90.00
The idea is brilliant but the cost puts it out of reach for many people. Please consider reducing the cost. Remember even though it's a murphy bed, it's still just a bed.
Sooooo helpful. Thanks and blessings to you!
can i use wood frame?
That price is just outlandish !! There's not 20 percent of that price in materials. You're hosing the buyers and anyone that has a good idea of how to build a concealed bed without such a costly item should put up their own posting for us to see. And then $59.00 for shipping !?!?!? I've gotten a crate engine delivered for less....
What type of springs are these? Where can we get replacement springs?
$589.00 for the mechanism ? I believe it's over priced!
Ho math
It's worth max 100$
hello uncle, I'm from Indonesia, I like the product ... may I know how much it costs
Good explanation and a stable mechanism buuuut.... Even if i had the money, just nope, to expensiv 300 would be the max. And wd40 is not a lubricant its the opposite a lubricant remover. It does provide a lybrication for a short time paradoxically but it destroy the original Lubrication. Still enough good lubricants out there for heavyloaded slow spinning bearings. Have those bearings a cage or are fully loaded with balls?
wd40 is good for iron or metal? and can you give more information about "the spring and the weight", like how much weight can 1 spring can bear?
HELP: I have the same system... My springs are opening in opposite facing opening. the hook on one end is facing downward and the other end, its facing upward. So I really cant just pot under the frame holes. one of the hook has to be on the top of the hole.....all the springs are like that.. all 16 of them...
Have you found the answer to that?
Do you send your products to bolivia?
Hola desde Argentina cuánto cuesta el accesorio GRACIAS
Hello. We only ship within the US.
Great product easy to use easy to install and it's safe once installed u are paying for a product that lasts
Thank you! 😊
I question the logic of MurphyBed to leave it to the buyer to install the springs. Murphybed couldn't manufacture this mechanism with springs installed? looks much easier to install them than IRL. MY Knuckles took a beating.
150lbs gas struts -60usd, bar stool swivels - $60.
Is there A link? Thanks
What are they called?
Are those mechanism from gold!!!? if yes! you can sleep on them!!
Can the spring assemblies be purchased separately?
Yes they can
where to buy this mechanism kit? and how much
It’s on our website at murphybedstudios.com
@@MurphyBedStudios Can you share the direct link to the mechanism?
@@MrCotico I have updated the description so that you can click the link to purchase it.
is this strong enough for a KING size bed
Yes it is. We make king size Murphy beds as well.
Can you provide me wall bed mechanism parts dimensions/sizes????
A queen size is
Height: 88 3/4”
Width 68 1/2”
Depth 17 1/2”
Where is it made?
Your depiction of putting on springs and taking them off the mechanism is ludicrous! No it’s not easy and they don’t “pop on and pop off” as you want us to believe. I’ve had 2 handymen in the Chicago area flat out refuse to touch your product when offered the job. What does that say about your product?
If the mechanism doesn’t have the face panel attached to it then it is easy with a little finessing you can get them into place pretty fast, if the panel is installed then yes it’s very difficult to install them that’s why you need to remove the face panels from the mechanism, un tension thé mechanism and install or remove springs.
How about I fly you in to build my Murphy bed and pay for your accommodations? That way it would only cost me 4-5 thou. Would you shave your head be nice and put the mattress in place? Or does that cost extra?
very smart
❤
Как заказат