سلام وخسته نباشید خدمت تمام پرسنل این واحد فوق العاده زحمتکش واقعا این عزیزان جواهراتی هستند که باید قدرشونو دانست الحق که حرفه ای هستن مدیر محترم مجموعه خواهشا قدر تمام این پرسنل فوق العاده فنی و زحمتکش رو بدانید و همیشه پشت و پناهشون باشید
سلام و وقت بخیر خدمت شما جناب سیدی عزیز باعث افتخاره که ویدیو های ما رو تماشا میکنید و با پیام پر از مهر و محبتتون به ما انرژی میدید امیدوارم هر جا هستید سلامت باشید و توی هر حرفه ای فعالیت میکنید موفق باشید و بهترین ها براتون رقم بخوره
These are really good motors, we have a few in our fuel bulk plants that have been running for about 37 years and still going strong. We’ve had to replace a few parts here and there but they are from an era when everything was over engineered.
@@earlycuyler8719 Hello, you are absolutely right, these electric motors are very good electric motors, even in the matter of winding, very little wire is used. May I ask which country are you from?
Trabalhei em empresa, norfil 1990, lá havia um compressor da Ingersoll Rand, me admirava com ele trabalhando, super silencioso, potente, rapidamente pressurizava a linha, perfeito!
@@dmitriybaginskiy4660 Здравствуйте, доброго времени. Большое спасибо, что нашли время посмотреть наше видео. Это очень ценно для нас. Могу я спросить, что вы делаете?
Cool, so etwas mal wieder zu sehen, genau so habe ich es vor 40 Jahren gelernt :-) Die Spulen haben wir jeweils mittels Hölzern in rechteckige Form gezogen. Und dann der Streß mit dem Motor auf dem Prüfstand, wie weit die drei Phasen auseinander liegen. Ach damals....
Hello and good time, thank you very much for watching our video, you are absolutely right, it is a very high quality product, and regarding the winding of the electric motor, I must say that surprisingly, only 80 kg of varnished wire is used in the winding process of this 288 kW electric motor.
Nicely done. I saw a big-motor rewind video from- I think- Bangladesh where they pulled an all-nighter: then had some clown at the end with blowtorch, stick solder and NO FLUX. Green flame, copper burning to black... which is presumably why they'd had to rewind the motor in the first place.
@@MarkMLl_uk Hello, thank you very much for taking the time to watch our video and thank you for leaving a comment for us. May I ask which country are you from?
@@coil_magnet UK: Faraday's country :-) Those joints were /very/ nicely done: you could see the solder wicking into the copper before the pour got to the end. There's a story that plumbers would use moleskin (rather than their glove) to make a neat wiped joint, but the name could apply equally well to heavy cotton fabric as to the little burrowing animal. But /please/ chaps, wear a mask when hacking that damaged insulation. I'm an old EE and predate all the current "snowflake culture", but even so: that stuff's nasty, and some of the modern materials are even nastier than the traditional ones.
@@adnanshaukat2656 Hello, good time, I am very happy that you have noticed and thank you very much for watching our video and sending an energizing message.🙏🙏❤️❤️
@@ВладимирБлохин-ъ5т Здравствуйте, для нас большая честь, что вы следите за нами из России, и большое спасибо за то, что подарили нам энергию своим добрым посланием.🙏🙏🙏
Super i bardzo pięknie ślicznie jest ten silnik przewinięty tylko go wziąć teraz kompresorem pomalować farbą proszkową Przy jakimś inną porządną farbą i będzie okejp serdecznie. 👍👍👍👍👍
@@andrzejporeda7281 Witaj, jesteśmy zaszczyceni, że obejrzałeś nasz film. Mam nadzieję, że jesteś jednym z naszych obserwujących i będziesz śledzić także inne nasze filmy. Praca została wykonana. Zostawię Ci link, abyś mógł zobaczyć, czy Ci się podoba ruclips.net/video/XAi61MEOcEs/видео.html
Hello, good time. Thank you very much for taking the time to watch our video. In the near future, the video with the details of your preparation and service will be presented on the channel.
سلام به شما کار بسیار خوب و یک ویدیو عالی. من عاشق موتور، پمپ و ترانسفورماتور هستم. موفق و پیروز باشید این کار حتی در آلمان، سیم پیچی موتور الکتریکی وجود دارد. و همچنین بسیار مقرون به صرفه است. در آلمان هیچ تحریمی وجود ندارد، اما اگر موتور را با نصف قیمت نو تعمیر کنید، مطمئن باشید که همیشه مشتری خواهید داشت، لطفا نگران آینده خود نباشید. درود فراوان از آلمان
سلام وقت بخیر ممنون که وقت گذاشتید و ویدیوی ما رو تماشا کردید چقدر لذت بخشه که یک هموطن عزیز از راه بسیار دور برای ما همچین پیام دلگرم کننده ای ارسال میکنه امیدوارم هر جا و در هر حرفه ای مشغول هستید موفق باشید . تنتون سالم و لبتون پر از خنده باشه همیشه
@@husainzaidi1527 Hello, good time, thank you very much for taking the time to watch our video and thank you for your message. Our workshop is located in Tehran, Iran. May I ask which country are you from?
Depends where they burned ii, inside or outside. Most people are smart enough not sit to close to a burning camp fire, etc There is always something in the air that’s bad for us. Remember too: when filming promotional and how to do instruction videos, safety devices are often removed so as to give a clearer picture. They are assuming you are taking responsibility for your own actions.
@@miltongalegomotores Hello, thank you very much for spending your valuable time and watching our video. Thank you very much for leaving us a comment, you are absolutely right, and of course we have these pneumatic hammers and have used them in some videos.🙏🙏🙏
Классная работа! Классные специалисты, какая огромная кропотливость труда и усидчивость требуется. Сколько метров проволоки ушло на перемотку? Что будет, месли изоляцию случайно повредят в процессе?
@@ЕленаГолдгриг Здравствуйте и приятного времяпрепровождения, спасибо за просмотр нашего видео и спасибо за ваш комментарий. В ответ на первый вопрос у нас нет длины провода, но мы использовали 66 кг провода. Нет, в конце концов. работы, после выполнения теста она будет определена, и снова замененная изоляция и электродвигатель будут доставлены нашему дорогому покупателю в полностью исправном и проверенном состоянии.
Здравствуйте, доброго времени, большое спасибо, что потратили свое драгоценное время на просмотр нашего видео, и еще больше спасибо, что оставили нам комментарий. Можете ли вы объяснить больше по теме, которую вы упомянули, и помочь нам?🙏🙏
Hello, thank you for taking the time to watch our video. Next Wednesday, the assembly and testing video of this electric motor will be uploaded to the channel.
Te salut din Romania ,am lucrat și eu în acest domeniu ,eram 5 femei și un singur bărbat în echipa de lucru ,totul mi se pare atât de cunoscut de parcă mă întorc în timp .Unde aveți atelierul de lucru ?
Boa noite Tiago. Sou assíduo espectador e admirador das matérias publicadas por você. A única crítica que tenha a fazer é que as suas sucessivas e excessivas aproximações e recuos da câmera me causam desconforto visual. Com isso não desejo que se transforme numa estátua, mas certamente seria mais agradável a quem assiste. Forte abraço, continuamos na luta contra essa bandidagem instituída na política de direita no Brasil.
@@jonnyd.2112 Здравствуйте, доброго времени суток, этот электродвигатель не китайский, он сделан в Англии, и в момент 00:35 видео хорошо виден его номерной знак.
@@ГеннадийПесков-г2ф Здравствуйте, ваш опыт работы очень солидный, но у нас нет причин лгать, и, как я уже сказал, номерной знак электродвигателя очень понятен. Если вы мастер, вы должны знать, как читать номерной знак электродвигателя.🙏🙏
@coil_magnet не хочу спорить, но такая мощность при таких габаритах возможна при частоте 200 герц, но тогда обороты двигателя были бы 6000 об в мин. Всё. Разговор окончен. Видео ФУФЛО! Как, впрочем многие видео.
Nobody make it in Germany, new motor is cheaper, new housing. Mostly protectet, no burning motor, only water filled, able to dry in ofen or something else
@@mekkertroniker2002 Hello, thank you for watching our video. We live in Iran and due to the embargo in our country, a new electric motor is very expensive and we cannot get it.
What these “safety freaks” don’t understand is these are true craftsmen and take responsibility for their own safety (as opposed to no brain workers that have a boss responsible for their safety.) If a worker is stupid enough to get hurt they don’t deserve this kind of job. This is a problem in American industry, the majority of workers are so unskilled they need someone to think for them and that’s really dangerous. Once someone else starts thinking for you, you take risks.
I'm not sure how being a true craftsman is supposed to protect the guy from the dioxine dust in the air which was inevitably created when they burned off the isolation.
Здравствуйте, доброго времени. Большое спасибо, что потратили свое драгоценное время на просмотр нашего видео. Отвечая на ваш вопрос, я должен сказать, что эта бумага электрически изолирована и устойчива к нагреву и принадлежит бренду NUMEX.
Not needed. This isn’t a production line where hundreds of parts come by in a day. Its a craftsman doing a job that requires dexterity. They wear gloves as needed. Eye protection as needed. Pull the pickle out.
@@MadmanJimbo Well all the operations noted need health and safety personal protective equipment (PPE).And there speaks the person who will have lung and throat infection, loss of an eye and the odd finger or hand removed.
سلام وخسته نباشید خدمت تمام پرسنل این واحد فوق العاده زحمتکش واقعا این عزیزان جواهراتی هستند که باید قدرشونو دانست الحق که حرفه ای هستن مدیر محترم مجموعه خواهشا قدر تمام این پرسنل فوق العاده فنی و زحمتکش رو بدانید و همیشه پشت و پناهشون باشید
سلام و وقت بخیر خدمت شما جناب سیدی عزیز باعث افتخاره که ویدیو های ما رو تماشا میکنید و با پیام پر از مهر و محبتتون به ما انرژی میدید امیدوارم هر جا هستید سلامت باشید و توی هر حرفه ای فعالیت میکنید موفق باشید و بهترین ها براتون رقم بخوره
These are really good motors, we have a few in our fuel bulk plants that have been running for about 37 years and still going strong. We’ve had to replace a few parts here and there but they are from an era when everything was over engineered.
@@earlycuyler8719 Hello, you are absolutely right, these electric motors are very good electric motors, even in the matter of winding, very little wire is used. May I ask which country are you from?
@@coil_magnet I live in America and am currently working in Tampa Florida
@@earlycuyler8719nice to meet you
Trabalhei em empresa, norfil 1990, lá havia um compressor da Ingersoll Rand, me admirava com ele trabalhando, super silencioso, potente, rapidamente pressurizava a linha, perfeito!
@@robertorivelinopereiradano2368 Hello, good time, you are absolutely right
Terima kasih tuan atas ilmunya.. Sangat di pahami
@@kileklangik Tank you so much
Не имею отношения к моторам и всему такому, но с удовольствием посмотрел))).
@@dmitriybaginskiy4660 Здравствуйте, доброго времени. Большое спасибо, что нашли время посмотреть наше видео. Это очень ценно для нас. Могу я спросить, что вы делаете?
Cool, so etwas mal wieder zu sehen, genau so habe ich es vor 40 Jahren gelernt :-) Die Spulen haben wir jeweils mittels Hölzern in rechteckige Form gezogen. Und dann der Streß mit dem Motor auf dem Prüfstand, wie weit die drei Phasen auseinander liegen. Ach damals....
@@rizab660 Hello, good time to meet you, thank you for watching our video and I am glad that it was a reminder for you.
Ingersoll Rand, worked for them for years. Great company, super products, or they were then.
Hello and good time, thank you very much for watching our video, you are absolutely right, it is a very high quality product, and regarding the winding of the electric motor, I must say that surprisingly, only 80 kg of varnished wire is used in the winding process of this 288 kW electric motor.
Lovely to watch this. Thank you! 😊😊
Thank you very much for taking the time to watch our video🙏🙏
بارك الله بجهودكم عمل عظيم للي يقدر جهودكم اندهشت من دقت العمل واتقانه لا يوجد اي خطأ في عملكم ❤❤❤
@@رياضبنوانابومحمد شكراً جزيلاً🙏🙏🙏
Nicely done. I saw a big-motor rewind video from- I think- Bangladesh where they pulled an all-nighter: then had some clown at the end with blowtorch, stick solder and NO FLUX. Green flame, copper burning to black... which is presumably why they'd had to rewind the motor in the first place.
@@MarkMLl_uk Hello, thank you very much for taking the time to watch our video and thank you for leaving a comment for us. May I ask which country are you from?
@@coil_magnet UK: Faraday's country :-) Those joints were /very/ nicely done: you could see the solder wicking into the copper before the pour got to the end. There's a story that plumbers would use moleskin (rather than their glove) to make a neat wiped joint, but the name could apply equally well to heavy cotton fabric as to the little burrowing animal.
But /please/ chaps, wear a mask when hacking that damaged insulation. I'm an old EE and predate all the current "snowflake culture", but even so: that stuff's nasty, and some of the modern materials are even nastier than the traditional ones.
@@MarkMLl_uk I am happy to meet you dear professor, thank you for your constructive comments
@@MarkMLl_uk 🙏🙏🙏
Absolutely, beautiful sharing ❤️ Loved it sooo very much. Really appreciated 👍. Lots of Love and Respect's from Pakistan. 🇵🇰❤️❤️🇵🇰
@@adnanshaukat2656 Hello, good time, I am very happy that you have noticed and thank you very much for watching our video and sending an energizing message.🙏🙏❤️❤️
As a lad I worked at an electrical repair shop, we used to rewind motors of all sorts (not as big as this) - its as hard as it looks.
@@hefy2jefy Hello, good time, the working principles are the same, but large electric motors require more experience and have their own tips
Отлично намотали!
Tanks a lot 🙏🙏
اللهم صل وسلم على سيدنا محمد واله وصحبه اجمعين ..
Я смотрю ваш канал из России классная работа успехов вам в вашей работе.
@@ВладимирБлохин-ъ5т Здравствуйте, для нас большая честь, что вы следите за нами из России, и большое спасибо за то, что подарили нам энергию своим добрым посланием.🙏🙏🙏
Man I thought the clean up at my in-laws basement was bad!!!!
Super i bardzo pięknie ślicznie jest ten silnik przewinięty tylko go wziąć teraz kompresorem pomalować farbą proszkową Przy jakimś inną porządną farbą i będzie okejp serdecznie. 👍👍👍👍👍
@@andrzejporeda7281 Witaj, jesteśmy zaszczyceni, że obejrzałeś nasz film. Mam nadzieję, że jesteś jednym z naszych obserwujących i będziesz śledzić także inne nasze filmy. Praca została wykonana. Zostawię Ci link, abyś mógł zobaczyć, czy Ci się podoba
ruclips.net/video/XAi61MEOcEs/видео.html
خدا قوت آقا مصطفی گل❤
Nice job with slot papers, & end coils, phase papers, try doing in on a moving ship, in the middle of the ocean, Did for 2-years, USN.
Hello, thank you very much for spending your valuable time to watch our video and thank you very much for your comment
Amazing job. Greetings from Portugal.
Olá, bom momento, ficamos honrados por ser de Orange a ver o nosso vídeo, muito obrigado por nos enviar uma mensagem.
Tellement simple réalisé par des Artistes. Bravo.
Tank you so much 🙏🙏🙏
Good Job done
Hello, thank you for taking the time to watch our video and thank you for your comment🙏🙏🙏
Zaber10 work,👍👍👍👍
@@NehalAnsari-rf1te 🙏🙏🙏
Хотелось бы видео до конца работы, до запуска двиготеля❤
Hello, good time. Thank you very much for taking the time to watch our video. In the near future, the video with the details of your preparation and service will be presented on the channel.
Bom trabalho ❤❤
Tank you 🙏🙏❤️
سلام به شما کار بسیار خوب و یک ویدیو عالی. من عاشق موتور، پمپ و ترانسفورماتور هستم. موفق و پیروز باشید
این کار حتی در آلمان، سیم پیچی موتور الکتریکی وجود دارد. و همچنین بسیار مقرون به صرفه است. در آلمان هیچ تحریمی وجود ندارد، اما اگر موتور را با نصف قیمت نو تعمیر کنید، مطمئن باشید که همیشه مشتری خواهید داشت، لطفا نگران آینده خود نباشید.
درود فراوان از آلمان
سلام وقت بخیر ممنون که وقت گذاشتید و ویدیوی ما رو تماشا کردید چقدر لذت بخشه که یک هموطن عزیز از راه بسیار دور برای ما همچین پیام دلگرم کننده ای ارسال میکنه
امیدوارم هر جا و در هر حرفه ای مشغول هستید موفق باشید . تنتون سالم و لبتون پر از خنده باشه همیشه
Doing it hard way…
Air chisel
Propane burner
Pull coils while still hot…. Slide right out
Clean slot residue with torch
15 mins tops…
@@turbodog99 Hello, good time, heating causes damage to the core of the electric motor
Parabens eu sou seu fã amo seu canal e seus vídeos sucesso sempre 👏👏👌👌👍👍🙏🙏🌹🌹🇧🇷🇧🇷
@@paulofrancisco565 🙏🙏🙏🙏
Sou brasileiro e gosto muito de ver os vídeo de vc
@@MateusrodriguesRodrigues-n7j Olá, estou feliz em conhecê-lo, estamos orgulhosos de que você esteja assistindo nosso vídeo🙏🙏🙏
@@coil_magnet tbm sou brasileiro e aprecio muito seus trabalhos e gostaria de saber a sua nacionalidade
@@jacksonsa6194 Hello, I am happy to meet you. I am from Iran. We love Brazilians very much and enjoy your footballers.
nice
@@jonathan-alexandredavis5616 Tanks bro🙏🙏🙏
highly skilled people!!
@@Richie4321richie Tank you so much 🙏🙏🙏
Very well done job. But, I would wear mask, too much dust.
@@MarcoAAOrtiz Thank you very much, you are right
These men are masters of their craft. Mad respect for these guys.
Tank you so much 🙏🙏🙏
Very good and quality work. Where is the workshop located? Which city and country ?
@@husainzaidi1527 Hello, good time, thank you very much for taking the time to watch our video and thank you for your message. Our workshop is located in Tehran, Iran. May I ask which country are you from?
@@coil_magnet thank you for the prompt reply, I am from your neighbouring country Pakistan. Keep up the good work.
@@husainzaidi1527 nice to meet you
Depends where they burned ii, inside or outside.
Most people are smart enough not sit to close to a burning camp fire, etc
There is always something in the air that’s bad for us.
Remember too: when filming promotional and how to do instruction videos, safety devices are often removed so as to give a clearer picture. They are assuming you are taking responsibility for your own actions.
👍👍👍
It's great to see a good factory reman...
🙏🙏🙏
I bet Big Clive's watching this vid!
Hello, thank you for taking the time to watch our video, may I ask who is Big Clive's?
@@coil_magnetHe is a youtuber.
Thanks
Tank you so much 🙏🙏🙏
Thank you for your support, we need your support dear ones🙏🙏🙏
1:38 If you update, you need a pneumatic hammer with a chisel, it makes the job much easier.
@@miltongalegomotores Hello, thank you very much for spending your valuable time and watching our video. Thank you very much for leaving us a comment, you are absolutely right, and of course we have these pneumatic hammers and have used them in some videos.🙏🙏🙏
Poderiam ter dado uma bela de uma limpeza e pintura antes do rebobinamento.😢
@@Desiludido79 👍👍👍
What tool do you use to measure wire size?
And tool brand name please ..
Hello, good time. We measure the diameter of the wire with a micrometer
@coil_magnet sir brand name please please
❤❤❤عالی
🙏🙏🙏
Creo que muchas personas para un solo motor eso es un trabajo de unas horas para solo una persona bobinado sencillo
@@enzoleonelorieta9141 👍👍👍
Классная работа! Классные специалисты, какая огромная кропотливость труда и усидчивость требуется. Сколько метров проволоки ушло на перемотку? Что будет, месли изоляцию случайно повредят в процессе?
@@ЕленаГолдгриг Здравствуйте и приятного времяпрепровождения, спасибо за просмотр нашего видео и спасибо за ваш комментарий. В ответ на первый вопрос у нас нет длины провода, но мы использовали 66 кг провода. Нет, в конце концов. работы, после выполнения теста она будет определена, и снова замененная изоляция и электродвигатель будут доставлены нашему дорогому покупателю в полностью исправном и проверенном состоянии.
Обдувочно-моечную камеру вам надо на период разборки .
Здравствуйте, доброго времени, большое спасибо, что потратили свое драгоценное время на просмотр нашего видео, и еще больше спасибо, что оставили нам комментарий. Можете ли вы объяснить больше по теме, которую вы упомянули, и помочь нам?🙏🙏
WOW they have benches to work on and not sitting on the ground. I wonder what his lungs look like
@@BobSmith-st1wq 👍👍👍
Yes, Iran is not Pakistan. Very interesting to see these not so suble differences.
Good job
@@jean-marcmericiris8756 Tanks bro
Very much appreciated if you show this motor actually works properly if possible.
Hello, thank you for taking the time to watch our video. Next Wednesday, the assembly and testing video of this electric motor will be uploaded to the channel.
Te salut din Romania ,am lucrat și eu în acest domeniu ,eram 5 femei și un singur bărbat în echipa de lucru ,totul mi se pare atât de cunoscut de parcă mă întorc în timp .Unde aveți atelierul de lucru ?
Hello, dear colleague, I am happy to meet you. We operate inside Iran
For your safety, I hope you are using a mask. There is a lot of dust.
👍👍
288 kw ! So that how much KV is its voltage ?
@@longanghoai9881 Hello, good time, its voltage is 380V
Кропотливый труд, но техники безопасности нет вообще.
@@alexandrkuzma6620 👍👍
Weren’t motors wrapped in Asbestos at one time?
@@blairframpton9196 Hello, good time, the insulators used in electric motors have asbestos
Good morning sir, my name is Hassan Ahmed and I am speaking from India. Can I get any job in your company?
@@HasanAhmed-qc8tt hello bro our workshop in iran
@@coil_magnet Sir, I know Iran. I have a passport. Will you get any chance of getting a job here in Iran?
آلمینیوم بوده؟
@@soroushzarein3246 سلام وقت بخیر
تشکر بابت همراهی و تماشای ویدیوی ما سیم لاکی مورد استفاده رو اگر میفرمایید خیر سیم مسی هست
This could only happen where you pay your workers a few pennies per hour. These people could use a mean ole union to smoke the asses of the owners.
The filthy dust everywhere is so dangerous.
@@jeanhawken4482 yes That’s true
Boa noite Tiago. Sou assíduo espectador e admirador das matérias publicadas por você. A única crítica que tenha a fazer é que as suas sucessivas e excessivas aproximações e recuos da câmera me causam desconforto visual. Com isso não desejo que se transforme numa estátua, mas certamente seria mais agradável a quem assiste.
Forte abraço, continuamos na luta contra essa bandidagem instituída na política de direita no Brasil.
@@paulopereira6980 Olá, bom momento, estamos orgulhosos por você estar nos observando. Com certeza tentarei resolver o problema que você mencionou🙏🙏
This is silver wire winding
@@muzammilkhan-cu7vg Hello, good time. No, it is copper wire
Это 288 квт китайские ?) ну двигатель оч мал для заявленной мощности .....100 квт максимум )
@@jonnyd.2112 Здравствуйте, доброго времени суток, этот электродвигатель не китайский, он сделан в Англии, и в момент 00:35 видео хорошо виден его номерной знак.
Внешние выводы собирают просто под бандаж. ФУФЛРО.
@@АлександрПанков-р9м 👍👍
Мощность этого двигателя не больше 80 киловатт.
Здравствуйте, доброго времени. Номер двигателя вы можете увидеть в 00:35, это 288 кВт.
@coil_magnet я сам обмотчик с сорокалетним стажем и знаю габариты двигателей.
@@ГеннадийПесков-г2ф Здравствуйте, ваш опыт работы очень солидный, но у нас нет причин лгать, и, как я уже сказал, номерной знак электродвигателя очень понятен. Если вы мастер, вы должны знать, как читать номерной знак электродвигателя.🙏🙏
@coil_magnet не хочу спорить, но такая мощность при таких габаритах возможна при частоте 200 герц, но тогда обороты двигателя были бы 6000 об в мин.
Всё. Разговор окончен.
Видео ФУФЛО! Как, впрочем многие видео.
@@ГеннадийПесков-г2ф Того, кто заснул, невозможно разбудить
How are borhan
Nobody make it in Germany, new motor is cheaper, new housing.
Mostly protectet, no burning motor, only water filled, able to dry in ofen or something else
@@mekkertroniker2002 Hello, thank you for watching our video. We live in Iran and due to the embargo in our country, a new electric motor is very expensive and we cannot get it.
@@coil_magnet yes, here is around 80€per hour personal costs, very big motors maybe rebuild
What these “safety freaks” don’t understand is these are true craftsmen and take responsibility for their own safety (as opposed to no brain workers that have a boss responsible for their safety.) If a worker is stupid enough to get hurt they don’t deserve this kind of job. This is a problem in American industry, the majority of workers are so unskilled they need someone to think for them and that’s really dangerous. Once someone else starts thinking for you, you take risks.
I'm not sure how being a true craftsman is supposed to protect the guy from the dioxine dust in the air which was inevitably created when they burned off the isolation.
Esmotorkatanbakatkarhaathsenikaljatahai
this Motor seems like 28.8 kw . Not 288 kw
@@balwindersinghbhombra8591 no sir 288kw
@@balwindersinghbhombra8591 In the reel video uploaded last week, its license plate is in the footage
А вот эти вот белые вставки для меди это обычная бумага? Или же какой-то специальный диэлектрик для электродвигателей? 29:13
Здравствуйте, доброго времени. Большое спасибо, что потратили свое драгоценное время на просмотр нашего видео. Отвечая на ваш вопрос, я должен сказать, что эта бумага электрически изолирована и устойчива к нагреву и принадлежит бренду NUMEX.
@@coil_magnet Спасибо!
@@ДимаБ-г8я Спасибо, что гордитесь и смотрите наше видео
The inside was burned and it was no longer usable
No varnish? Wtf!
Dust extraction, face masks or heavy duty gloves. not supplied or needed? Piss poor advert for health and safety.
Hello, thank you for watching our video and thank you very much for sending us a message. You are right, we try to ensure safety🙏🙏
Not needed. This isn’t a production line where hundreds of parts come by in a day. Its a craftsman doing a job that requires dexterity. They wear gloves as needed. Eye protection as needed. Pull the pickle out.
Plenty more where they are.
@@MadmanJimbo Well all the operations noted need health and safety personal protective equipment (PPE).And there speaks the person who will have lung and throat infection, loss of an eye and the odd finger or hand removed.
@@coil_magnet But you are not.
Alot of labor
@@MoDave82 That’s right 🙏
😩👎🏻
why???
и движок не заработал !
Привет, доброго времени, залил на канал видео тестовой сборки и работы двигателя.