I love scooting and I love the architecture and engineering they put into that engine and I guess friend or Japan south Korea liked it to I own a 2001 daelim delphino / it comes in two types a 125 cc 4 stroke( I'm not Shure if it their design or another scooter manufacturers design like a 25 cc smaller gy6 150) The other version is a 100 cc two stroke that they built off of Hondas af18s full architecture and in collaboration with Honda. If you guys can give me any performance advice I would greatly appreciate it thank you
да хер кто купит,цена будет ебанутая.я вот нашел поршневую на свой address v100 malossi 120cc так цена 260 доларов.за поршневу на которую нет ремонтных поршней. мопед купил в 2020 за 670 дол......
Hammering bearings in with a steel hammer. You can already take those out and throw them away 😂. Little heating of the case will make them drop in without tools.
Hi ,,,, I wanted to find out what kind of scooter is in the background in black , in the video it is 28 minutes 29 seconds ,,,. Thank you It's just that I haven't seen such in Russia yet
Ca me rappelle les années peugeot 103 des mob qu on faisait monter a cents kmh mais ca casser souvent le debut des kit polinie on a tout essayer jusqu à tant qu on trouve le bon moteur mais ca tenait jamais longtemps j ai pas asser de mais 10 doigt pour dire le nombres de fois que j ai changé le moteurs
Baring installation like, yeahhh new baring bam bam bam after first rideout we need new barings i must hit zem harder i think! xD bleas use baring press tools and don’t damage
Hey, BWSP team. I’m Riki from Tokyo. I’m thinking about buying this and having few questions. 1, do I need high capacity gas pump for this? If so, is there any recommendation? 2, should I buy aluminum gas tank from your product lineups rather than using STD gas tank? 3, I am assuming that this needs to be pre-mixed (oil and gas) fed. Is this correct? Thanks I’m advance! 4, is it possible to put engine starter to this kit?
@@peggythehotdog1731 or as a minimum a car jack and socket set lol I want to find a 3kj motor for a swap. questioning these guys build quality, good parts but hack job assembly.
Kinda deceiving showing a build with a black case and multi colored kick start then showing a silver case engine run then showing another silver case engine in the end on the stand. What happened to the black case engine?
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Wow beautiful work , how much that kind of set for dio sir
For order text me in WhatsApp +8613068844900
@@BWSP-CLUB how much the price in your shop in peso
ex. $170 to peso
@@johnmarkesguerra6998 expensive than yamaha mio highend upgrades tho
@@johnmarkesguerra6998 trust me no worthy of
Want a big bore
Nsr150/250 will be more power and endurance
@@hansmarquez 100k ganyang makina pero ang high-end na upgrade sa mio eh naabot 200k dipende sa ikakabit
Man that gold carb is crazy beautiful!! I pray one day I can have a badass motor like this on my scoot
Beautiful work! I really appreciate the videos and cutting edge technology and styling
I'm Dio user from phillipines
What about drug user .
WHo cares? lol
good job! great engine! Brasil loves 2 strokes
Is that will work for aerox 50cc's engine...?
Work of art
Мотор топ мне бы такой )
Редукторное масло лишнее? Поршень на сухую норм?
Is it leaking water?? I noticed tons of drips when you were testing it at the end
Straight JISO 🤙
i love it... old but gold
Very nice. I am from Iraq. I hope to communicate about how to make such a powerful and fast-responding engine
Where do you buy the cnc crank case and how much? Tia❤
Жестко пацани мутять суету навелии
can you make a 50cc Sanex motorcycle engine that looks good and gets faster and can be used everyday?
If you wanna go fast a 50cc isn’t gonna cut it, you need a 70cc at least
Wow I got my 125 af18 u got goodbparts ma
Do you have any tuning for the old motor? af05e
I wish you will also do the blitz in your future videos. More power to your channel.
Thao tác giống thợ Việt Nam quá!!
I love scooting and I love the architecture and engineering they put into that engine and I guess friend or Japan south Korea liked it to I own a 2001 daelim delphino / it comes in two types a 125 cc 4 stroke( I'm not Shure if it their design or another scooter manufacturers design like a 25 cc smaller gy6 150)
The other version is a 100 cc two stroke that they built off of Hondas af18s full architecture and in collaboration with Honda. If you guys can give me any performance advice I would greatly appreciate it thank you
Is there a chance where you can make an engine where you can put a disc brake on it, like the gy6...?
Hi, I have a question, how much will such a motor cost, and how much does it cost to bring it to Russia
Мне о таком только мечтать, есть дио 27, но нет деталей таких, весь интернет перерыл но ничего не нашёл. Почему к нам такие детали не завозят?
да хер кто купит,цена будет ебанутая.я вот нашел поршневую на свой address v100 malossi 120cc так цена 260 доларов.за поршневу на которую нет ремонтных поршней. мопед купил в 2020 за 670 дол......
I would like to see the maximum speed how many / km can I run?
That would be great ☺️
Easy 80/90 mph
เสียงเอาเรื่องอยู่
how these engine are produced?
纏止洩帶的技術要在加強
How long would this set up last before needing a top end? I want one.
I’m just wondering why would you guys not use a full circle crank.
Are you using a standard dio cylinder block
Hammering bearings in with a steel hammer. You can already take those out and throw them away 😂. Little heating of the case will make them drop in without tools.
Explique porque las bielas no de quedan debajo suben sola que ventajas tiene eso en velocidad
Product? 10/10
Bearings and seal install? 1/10
Hi ,,,, I wanted to find out what kind of scooter is in the background in black , in the video it is 28 minutes 29 seconds ,,,. Thank you It's just that I haven't seen such in Russia yet
What brand your rotor is?
water leaks ??
Oil licking... But great job gais. Love to see more ❤👍🇲🇾
Huge compression
What is the name of the color yellow?
Make honda cb400 is belt driven cvt system,
I have seen hayabusa machine on snowmobile(hrc-4)
Is this good for a long ride??
is the same motor of the Jog?
What the price on the CNC crankcases ?
Thats a monster toy.
Qual valor do motor ? Brasil 🇧🇷 aqui !
best modified :D
nice karburator
16:10 how to kill a bearing. Next time take a nylon block or cylinder, something like that, u cant hit the same place with a hammer.
$? The casing with the crankshaft
Cuanto lo vende estoy interesado
Sir what rpm is the center spring used? Plss
How much for the whole build?
Ca me rappelle les années peugeot 103 des mob qu on faisait monter a cents kmh mais ca casser souvent le debut des kit polinie on a tout essayer jusqu à tant qu on trouve le bon moteur mais ca tenait jamais longtemps j ai pas asser de mais 10 doigt pour dire le nombres de fois que j ai changé le moteurs
Are you selling that king of engine 160cc? Thanks for the reply in advance
I wish ihave that engine too😌
How much for that eagle engine set? With water cooling all the stuff
Me imagino la honda tact del 86 con ese motor XD
沒壓床嗎? 軸承直接用鐵鎚敲....
ほしい。。。
どこで買えますか？
Can you make an aerox engine
Top banget
how can 56x58 160cc?
154cc exactly
Milling cylinder head boy
หาซื้อได้ที่ไหนครับ
чет мне кажется или в конце на видио запчасти с легка другие ;)
А почему сцепление другое и крышка с кик страртером другая ?
Baring installation like, yeahhh new baring bam bam bam after first rideout we need new barings i must hit zem harder i think! xD bleas use baring press tools and don’t damage
What is baring🤣 i only know bearings
ราค่า.ถังเครื่องพร้อมขี่..เท่าไรคับพี่
สั่งเครื่องแบบนี้ได้ที่ไหนครับ
I been trying to get one of these cases, how can I get one?
Only complete engine for sale
Hey, BWSP team. I’m Riki from Tokyo. I’m thinking about buying this and having few questions.
1, do I need high capacity gas pump for this? If so, is there any recommendation?
2, should I buy aluminum gas tank from your product lineups rather than using STD gas tank?
3, I am assuming that this needs to be pre-mixed (oil and gas) fed. Is this correct?
Thanks I’m advance!
4, is it possible to put engine starter to this kit?
Hey Riki
1.can use std pump and tank
3.Need mix oil 1/35
4. Can't put electric starter on this engine
Это уже не Dio, этот движок выточен на цпушке из двух цельных кусков алюминия, а не отлит. ЦПГ тоже кастомная.
Я вообще не понял юмора,собирали один,а в конце совершенно другой.
@@АйдерАй.Т.И впринципе собирали как непонятно кто
Какая разница выточен он или отлит?)
Сколько мощность в нем?
1 лошадинная сила
How much will cost for that engine sir?
Where can I order I'm in SA
hello? This is Korea (Seoul) I am riding a Piaggio NRG50 (MC1). Can I purchase a fully customized engine assembly from you?
how much si the set up sir. edward from philippines wow sir
I am India🇮🇳🎉
Phê 😅
Phê thật bác ạ,chắc cỡ vài chục củ mất
3,800$ à bác 🤣🤣
How much for this type of engine? Can export to philippines?
any transaction in philipines
when will the 4VP engine be ?
When someone make order
How much the parts and over all engine?
How much is that casing 56.mm $?
160cc?
How much for that kind of set Sir
honda beat 2020 please
Is this shop legit to order from? Sorry I just want to make sure someone help
Sure, you can visit our website : www.tunescoot.site
How much it cost? Do you build it sell it?
Make one that runs on diesel or lpg, for this kind we can make ourselfes...it aint fair
fantastik
Có bán về việt nam k 🇻🇳🇻🇳
Oye quiero modificarla mi moto es una Yamaha 50cc 2 tiempos
@
BWSP TUNESCOOT 好美好棒的車,我很喜歡,台灣沒有,是否能賣我?
I think Shortage of Gas supply.
Big no no for installing oil seal and bearings, wow. Straight up backyard mechanic lol!
Yeah some procedures are a bit rough hey
@@rwilko9525 use hydraulic press for bearings and seal driver set for seals!
@@peggythehotdog1731 or as a minimum a car jack and socket set lol
I want to find a 3kj motor for a swap. questioning these guys build quality, good parts but hack job assembly.
@@peggythehotdog1731 no need for a hydraulic press
I wouldn’t let him put petrol in my bike never mind building me somot !!!
Cool, how much that one sir, from philippine
100,000 bro sobra
Yo quiero una máquina 3kj modificada en cuanto me sale yo soy de la republica Dominicana
Quiero un motor así
Kinda deceiving showing a build with a black case and multi colored kick start then showing a silver case engine run then showing another silver case engine in the end on the stand. What happened to the black case engine?
Might in the bin 🤣
CNC的KS?
限界近くのチューニングエンジンは10インチタイヤだとかなり膨らみますね‼️
( =＾ω＾)👍️
タイヤとクランクケースのクリアランスの
問題が、、、
笑っ🤣