You do not know how frustrated I was trying to put the pieces of my key fob back together and then I found your video! Thank you for sharing a very clear and descriptive video!
Thanks so much for making content like this! as a woman with no clue and almost breaking this before seeing your video, this was SUPER helpful! Blessings!
My key fob battery is the original and there is what I think is dielectric lubricant on the parts, should some when I replace the batteries and since mine doesn't have the plastic piece (what's that for, doesn't that stop the battery contact and therefor no power to the mechanism) should I use dielectric grease in between the batteries?
that's anti-corrosive gel. It wouldn't hurt to put it on but I usually never do. I find that if the fob is kept dry I don't have issues with battery corrosion.
It's interesting that Amazon is selling Ford fobs. This is a surprisingly bad design. Ideally you'd change batteries by unscrewing a cap, removing the old AA or AAA battery, insert new battery, and screw cap back on. The good news is that if your fob batteries are dead, you can put the fob into a depression under a mat in the front of the center console.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
You do not know how frustrated I was trying to put the pieces of my key fob back together and then I found your video! Thank you for sharing a very clear and descriptive video!
You're welcome! Glad it helped
Focused instructions and no blah blah. Very efficient Best-in-class example. Thank you and well done!
Thanks! Glad it helped
Thanks so much for making content like this! as a woman with no clue and almost breaking this before seeing your video, this was SUPER helpful! Blessings!
You're Welcome! Glad it helped
Excellent video thank you! No life story, no extra fluff - straight to the point 👍
Thanks! Glad it helped
Thank you for this direct and to the point video, it was a big help!
You're Welcome! Glad it helped!
Excellent! like others said straight to the point time is money. Short videos are more valuable
Glad it helped!
Thank you so much for this video! Would not known how to do this and you presented it so that it was easy to understand.
You're Welcome!
Thank you! You directed me to do the job and get it going again.
You're Welcome!
You're Welcome!
I couldn’t get the back on and did it right away after watching this! 😊
Glad it helped!
Good video! Came in handy tonight 👍
Thanks! Glad it helped
Cr2032 does in fact work. I'm not sure if the range or battery life is different though.
youve changed my life
Glad it helped
Great job!!! Thank you and it is very informative!
You're Welcome! Glad it helped
Thank you for posting this video.
You're Welcome!
Excellent video, thanks very much!
You're Welcome!
My key fob battery is the original and there is what I think is dielectric lubricant on the parts, should some when I replace the batteries and since mine doesn't have the plastic piece (what's that for, doesn't that stop the battery contact and therefor no power to the mechanism) should I use dielectric grease in between the batteries?
that's anti-corrosive gel. It wouldn't hurt to put it on but I usually never do. I find that if the fob is kept dry I don't have issues with battery corrosion.
Thank you for the assist!
Glad it helped!
Do you have to program the remote ? After changing the batteries my remote is just blinking red
No - should not need reprogramming
@@PYR-Auto ohh well it just blinks red
I have a red light appears that flashes 3 times. The flashing red light appeared after replacing the batteries and the remote doesn't function.
Thanks a lot for your help!;)
You're welcome!
Awesome. Thank you
You're Welcome!
worked thanks!
You're Welcome!
Life savor video
What if my fob is missing the little plastic between the two batteries?
I have never used one without that piece but have seen other comments where they say it works without it
You said that a single 2032 battery coul be used, but did not give any details. How do you use a 2032 battery?
No it takes two Cr2025 batteries as the video says
I had 2032 batteries laying around the house. I was able to use those in my fob without issue. I have the identical fob shown in the video.
Very helpful
Glad it helped!
CR2032 worked fine...just one
Thank you!
You're Welcome!
Thank you.
You're welcome!
What is the plastic thing
Trying to figure out what to do without the plastic piece now.
Works with two 2032 batteries as well folks
Does it need reprogrammed or my key administrator options on raptors? Thanks!
No, it shouldn't
It's interesting that Amazon is selling Ford fobs.
This is a surprisingly bad design. Ideally you'd change batteries by unscrewing a cap, removing the old AA or AAA battery, insert new battery, and screw cap back on.
The good news is that if your fob batteries are dead, you can put the fob into a depression under a mat in the front of the center console.
You do not always need a flathead screwdriver to get the thing apart
this is really pissing me off, not one damn video has a remote without the button in the back. How in the fuck am i suppose to open this damn thing?
Did you have figure it out? Because I'm following in your footsteps.
Plastic piece is missing. Worked ok without it.
👍🏼
👍🏼
you have stronger fingernails than I 😖😬
That's not a key to a 2017 Ford F150.
Exact same as my 2017 F-150.
Ignorance is no longer bliss.
@@timgregg772 I have a 2017 Ford F150 Coyote engine bought it brand new. My key does not look like that key. That I got from the dealers.
I love RUclips. Thank you sir 🫡
You're welcome!
Thank you
You're Welcome!