Stuck after the update because touch is not working? 📺 Check this tutorial: ruclips.net/video/ocxY9fMtIkU/видео.html Need OBDeleven? 🛒 mr-fix.info/redirect/obdeleven 🎟 Get 10% OFF with code: MRFIX10
Perfect tutorial! Just updated my VW MIB-PQ with the very last firmware, all the process was similar to your video, no wrong way or bad surprise. Thanks for that, Mr-Fix !! The full process take more or less 25 minutes.
Ok in the end it wasn't that complicated thanks to your help. I'm just shocked that Skoda don't seem to care one iota about providing firmware (for older cars?).
Hi I just got a golf 7 from 2015 and I watched this video and also the most recent one about updating the map. I am a bit concerned about updating the firmware. Is there a possibility to back to the previous version if necessary? I have a MSTD_EU_VW_P3350 I saw on MIB helper that there is a much newer version but kind of overwhelmed if something goes wrong, I would not like to loose some option like the back camera. Thank you for your videos.
Mr. Fix you are the best! What a clear instruction and fine demonstration about how to update to the latest update. Thank you very much man for helping lots of people out there with your fine videos!
Hejka pytanko, odpaliłeś to radio na stole zasilaczem komputerowym? Interesuje mnie stary MIB 2014 z Leona (całość w radiu bez czytnika w schowku) i chce zamontować go do auta który ma zwykłe złącze ISO, czy zwykłą przejściówką podając mu zasilanie 12v ruszy to radio czy jednak wymaga tego podłączenia linii CAN
@@mrfixpl Wszystko spoko jednak są pewne problemy… Bluetooth nie działa bo prosi o zapłon oraz radio trzeba ręcznie wyłączać. Poddałem się może kiedyś powalczę ale już z nowszym MIBem dzieki za odpowiedź
Depends what have you done. If it was an official activation, you are good to go. If it was unofficial (patching), this update will most likely overwrite it and you will have to patch it again.
Thanks for the very, very useful walkthrough. One question/concern - If I do the upgrade MST2_EU_SK_ZR_P0245T to MST2_EU_SK_ZR_P0253T, will I need to follow the "Confirmation of installation change" steps? And if I don't, is there a risk that my system won't work?
Hi, I need some help with update Skoda Citygo MEN2 version. Now I have MEN2_WW_SKPQM_P6430L. I have problem with bluetooth. When I try to connect my POCO 6 it conncet and disconnect all the time (after 2 sec.).
Hi, congratulations you are very prepared. You would also know the procedure to switch from Amundsen to Columbus Touch and Mib 2.5 units (if I'm not mistaken) for Karoq
@mrfixpl miałem wersję p0241t, dałem update do 0253t, mib helper sugeruje, że jest możliwość zaktualizowana do 0480 ale przy próbie instalacji mam błąd, że download applicstion jest za stara. Czy to znaczy, że mam aktualizować każda wersję dostępna na mibsolution aż dojdę do 0480? Chciałem odblokować android auto, czy ta 0253t styknie czy jednak lepiej zaktualizować do 0480?
Good day. I have a problem. Car radio. When turned on, the logo and radio sound appear, then an endless reboot begins. I think that the update will help. Where can I get updates for MIB STD2 ZR+NAV 3Q0035824B SW0359 HW H30 Thanks in advance for your answer.
i have the lastest software but i have bluetooth issue with connectivity, so i will try to install same software again, if i do this update on my skoda octavia 3 facelift will it delete what i unlocked with carista and car scaner like virtual subwoofer, needle swap etc... and will my smart link remain unlocked? i dont want to mess something.. ty m8
I have Firmware 0478 on a Fabia NJ, is there any Changelog? Sometimes my bluetooth music just stops for 1 or 2 seconds, it's pretty annoying. Also very good explanation, thanks.
Hi There Mr fix! the MIB helper says there is updated version for my VW golf8 MIB3 but its no where to be found in the download site. My current ver is MEN3_EU_VW38X_P2045L is it only for Skoda this source ? Thank you!
When it comes to MIB3, I would not risk a self-update. Not for now. There's very little documentation about what's exactly needed afterwards, since those cars are just ending the warranty.
@@mrfixpl Thank you for your reply, We will live with the annoying bugs... I already did one update at the dealer , they also used a usb-c stick , didn't use the Odis software... The problem it takes them a long time from the release of the update till it's available to the clients...
Look at the forums for the updates. I know that with MIB3 on the new Octavia NX people have shared the updates and they have been working fine. I was on the fence about trying it and one day I got a massive OTA few months ago that fixed all my bugs in my Octavia.
Sadly the right files for MEN2_EU_SKGPX_P9160L seems not to be there. Can you help? Im Stuck with a bug in Carplay that makes crackling noises. I think a Softwareupdate should solve the Problem.
Excellent video. Thanks for posting it. I ran in to a problem at the end unfortunately. When I click start to do the update in the car I get the following alert. "Unable to read the file meta-information" "Can't use Update Container. The current Software Download application is too old"
Mostly system stability improvements. But if you force foe example FW update from 02xx to 04xx on Technisat units, you will have couple small additional features.
The Amundsen system in my 2015 Skoda yeti stopped working one day and gave the code emergency update please insert disc. Then repeated this over and over with the unit locked so that I couldn't turn it off until it flattened the battery so I had to unplug it. plugging it back in produces the same results. How do I fix it?
I currently have MHI2_ER_VWG11_S2125_1 (MU: 0343) what will be the latest firmware? the website you provided shows me the latest MHI2_ER_VWG11_K3342, it is the correct firmware? because this new one is K3342 and currently instaled is S2125_1
Hello, Thankyou for all the super helpful videos. I have an MIB2 Technisat unit. After i follow the instructions 1. Enable the Green Engineering Menu 2. Install toolbox 3. Unlock App Connect. Would there be a way to go back to original stock firmware with all the 3 things back to how they were? e.g: Disable Green engineering menu, Uninstall toolbox and Lock app connect. Asking because if i sell the car then i want it to be back to its original firmware so that the new owner doesn't know that i messed around with the system.
I am glad that you are showing to us the other kind of opening such a feature. Which can be sometimes useful. I would like to ask can be this used also on the radio from Skoda Octavia 3 Swing 3 (MIB2) SW: MEN2_EU_SKGPx_P0080L MU: 8755? The radio shall support Apps but I took radio from other car then I unlocked the CP (not me one guy who has all tools for it ODIS and licenses). I lost the Android/link because radio was mount on other car. So basically I am looking for some solution and this looks like the one I am looking for. Now, it depends if I can do it on the Swing3 technically it should works. Could you somehow tell me if is possible please?
"Hello everyone, for a couple of days now, my VW CC RNS system (I think it's Composition Media) has been acting on its own. It opens settings and executes commands spontaneously. Can anyone tell me what could be the issue? Even the reset doesn't work, and it happens even when the car is turned off, as I initially thought it might be a steering wheel problem."
Hello mr-fix, I am getting an error "Unable to open file release information" also I am getting a message poing up some times which say error updating. Have you meet something like that before? After a check online I have spoted that most of the people who are getting this errors are with HIGH units could this be the problem ?
hi I have a question where can I find the firmware (mst2_eu_vw_pq_p0254t) foor unit 5c0035680B ?.. I have looked up mibslution but i found nothing tenks
Mam skodę Yeti z wersją MST2_EU_SK_PQ_P0138T. Wg mib-helper najnowsza możliwa aktualizacja to 0353, jednak na mibsoluton nie ma 0353 tylko 0253. Skąd mogę pobrać nowszą wersję i czy możliwy jest update z wersji 138 do 353 (lub 253 jeśli nowszej nie będzie)?
jak pobrałeś mapy to ( a na video sie tobie to udało ) to czy mógłbyś je gdzieś na priv serwer wrzucić?! pobiera około 700 mb i stop... a całośc niby zajmuje `` 26Gb
I went from P0245T to P0253T in my VRS but I want to know if I can go to P0480T - I searched online for answers some people say no you can only go with firmware that matches the P02XXX - does anyone know for sure?
I don't think there was Delphi unit for Skoda. But the update procedure for Delphi is the same. Download package, extract to SD card, trigger update from hidden menu.
Hi i installed myself all seat sound system in mib2 seat 2015, and configured with vag com to 9vd and now i have subwoofer control but the volume of subwoofer doesn't change. Do i need yer or yes Vag can pro? or i can activate in other way? Thanks in advance
Witaj @mrfixpl Po wgraniu plików na kartę SD wyskakuje mi komunikat o niemożliwości odczytania meta danych? Co robię źle? Postępuję zgodnie z tym, co pokazujesz na filmie. Doradź proszę 😢
Możesz sobie zobaczyć to: ruclips.net/video/RU3a3YXGIsY/видео.html W prawdzie VW i dodatkowo z patchowaniem, ale to co najważniejsze będzie się zgadzało.
@@mrfixpl dzięki, będzie robiony update, a będzie jakiś odcinek odnośnie przedniej kamerki? Pisałem do Ciebie z pytaniem na priv ale nie odpisałeś. Zabieram się powoli za to i chciałbym się dopytać ;) pozdrawiam, super robota
I have a golf 7.5 the current software is MEN2_EU_VWGPx_P9260L there is a new software witch is MEN2_EU_VWGPX_P8050L I could not find the software to download it in the MIB-helper.Could you assist me please. Thanks
Hello i need help i ordered a wireless carplay for my mk7 2016 and i have stock MIB with connector i am unable yo connect the wifi carplay with my headunit what would be the procedure to make it work if i upgrade to MIB2 will it solve the problem?
Which firmware you have right now? If you have MIB1 (MSTD or MHIG) - there's no CarPlay support in those units. Neither wireless nor wired. You would have to add a CarPlay box under the dashboard that goes between the main unit and the display. It around 250 Euro on AliExpress. If you have MIB2 (MST2 or MHI2), there's most likely a chance that your unit supports wired CarPlay. You would only need a wireless adapter like CarlinKit.
Great videos. I am trying to update my VW polo 2016 MST2 to the latest P0480T. When I try to update it says ‘Unable to read the file Meta information, can’t use update container. The current software download application is too old’. Im on P0138T. Cheers
Ofcourse it dont work. Your sw version is 01xx you cannot update to 04xx sw. In your case, 0140 is the latest sw version you can do... Alsway stay in same sw version 01xx to 01xx, 02xx to 02xx, 03xx to 03xx, 04xx to 04xx.
Thanks. Also I’m having trouble changing the code (error 1555) on both my vw polo and Skoda Kodiaq. I manage to find confirmation of installation change. Replaced code using MIB-Helper. It says changed but then goes back to original. I’m using vcds. Does the stereo have to be turned off? Cheers
Stuck after the update because touch is not working? 📺 Check this tutorial: ruclips.net/video/ocxY9fMtIkU/видео.html
Need OBDeleven? 🛒 mr-fix.info/redirect/obdeleven 🎟 Get 10% OFF with code: MRFIX10
@mrfixpl
Do I get any other benefits with the newer software? Can I also add voice control? My Škoda is from 2017. Great video by the way!
Perfect tutorial! Just updated my VW MIB-PQ with the very last firmware, all the process was similar to your video, no wrong way or bad surprise. Thanks for that, Mr-Fix !! The full process take more or less 25 minutes.
It has men2 software?
Any idea why it says?
""Unable to read the file meta-information.
Dependencies of update not met
Can u do a video where u update from MST2_EU_SK_ZR_P0369T to MST2_EU_SK_ZR_P0480T ? thank you.
Why is this so mind bogglingly complicated? Why can't it just download it through the phone? Unreal..
Ok in the end it wasn't that complicated thanks to your help. I'm just shocked that Skoda don't seem to care one iota about providing firmware (for older cars?).
Not sure why they don’t provide those updates openly.
Hi, super video as always. I'm wondering if this can be done on a VW MIB2 standard delphi unit ?🤔 I prefer the skoda look. Thank you
mibsolution seems to be taken down. Where else can I get an update anyone able to email me??
Hi I just got a golf 7 from 2015 and I watched this video and also the most recent one about updating the map. I am a bit concerned about updating the firmware. Is there a possibility to back to the previous version if necessary? I have a MSTD_EU_VW_P3350 I saw on MIB helper that there is a much newer version but kind of overwhelmed if something goes wrong, I would not like to loose some option like the back camera. Thank you for your videos.
Great video as always 🔥🔥🔥
Mr-fix can you do update from
03xx TO 04xx ?
why installing new firmware? Is there new functionality?
willl the update unlock mirror link?
Brak plików w folderze MST2 TechniSat Preh
mibsolution is down - any other links ?
Mr. Fix you are the best! What a clear instruction and fine demonstration about how to update to the latest update. Thank you very much man for helping lots of people out there with your fine videos!
Thank you! Please feel free to share this tutorial on FB Skoda groups! 😅
Hejka pytanko, odpaliłeś to radio na stole zasilaczem komputerowym? Interesuje mnie stary MIB 2014 z Leona (całość w radiu bez czytnika w schowku) i chce zamontować go do auta który ma zwykłe złącze ISO, czy zwykłą przejściówką podając mu zasilanie 12v ruszy to radio czy jednak wymaga tego podłączenia linii CAN
Odpaliłem go jakimś zwykłym zasilaczem 12V 3A.
W innym aucie będziesz potrzebować jeszcze emulatora zapłonu, żeby się nie wyłączało po 15 minutach.
@@mrfixpl Wszystko spoko jednak są pewne problemy… Bluetooth nie działa bo prosi o zapłon oraz radio trzeba ręcznie wyłączać. Poddałem się może kiedyś powalczę ale już z nowszym MIBem dzieki za odpowiedź
I've just had updated last month to get Apple car play working, will this remove that??
Depends what have you done. If it was an official activation, you are good to go. If it was unofficial (patching), this update will most likely overwrite it and you will have to patch it again.
Hello, will this activate mirrorlink on my skoda octavia 2016 1.6? Now i don`t have avabile
Firmware update will not activate new features. but please check this: ruclips.net/video/a9uwYmBPc1Q/видео.html
Thanks for the very, very useful walkthrough. One question/concern - If I do the upgrade MST2_EU_SK_ZR_P0245T to MST2_EU_SK_ZR_P0253T, will I need to follow the "Confirmation of installation change" steps?
And if I don't, is there a risk that my system won't work?
Hi, I need some help with update Skoda Citygo MEN2 version. Now I have MEN2_WW_SKPQM_P6430L. I have problem with bluetooth. When I try to connect my POCO 6 it conncet and disconnect all the time (after 2 sec.).
Hi, congratulations you are very prepared. You would also know the procedure to switch from Amundsen to Columbus Touch and Mib 2.5 units (if I'm not mistaken) for Karoq
You will need new unit, new display, new dashboard trim, coding & adaptation, remove CP, insert FEC/SWaP codes.
Hi, thanks for the reply. You can tell me how and where to be able to document me, I'm grateful to you@@mrfixpl
@mrfixpl miałem wersję p0241t, dałem update do 0253t, mib helper sugeruje, że jest możliwość zaktualizowana do 0480 ale przy próbie instalacji mam błąd, że download applicstion jest za stara. Czy to znaczy, że mam aktualizować każda wersję dostępna na mibsolution aż dojdę do 0480? Chciałem odblokować android auto, czy ta 0253t styknie czy jednak lepiej zaktualizować do 0480?
Good day. I have a problem. Car radio. When turned on, the logo and radio sound appear, then an endless reboot begins. I think that the update will help. Where can I get updates for MIB STD2 ZR+NAV 3Q0035824B SW0359 HW H30 Thanks in advance for your answer.
i have the lastest software but i have bluetooth issue with connectivity, so i will try to install same software again, if i do this update on my skoda octavia 3 facelift will it delete what i unlocked with carista and car scaner like virtual subwoofer, needle swap etc... and will my smart link remain unlocked? i dont want to mess something.. ty m8
I have Firmware 0478 on a Fabia NJ, is there any Changelog?
Sometimes my bluetooth music just stops for 1 or 2 seconds, it's pretty annoying.
Also very good explanation, thanks.
How to update navigation Škoda Karoq 2021 almudsen?
hej, mam pytanie, bo tutaj na filmie nie występuje - Fix B201A fault - ten błąd zawsze wywala po update softu? trzeba go kasować, czy można to olać?
Hi There Mr fix! the MIB helper says there is updated version for my VW golf8 MIB3 but its no where to be found in the download site.
My current ver is MEN3_EU_VW38X_P2045L is it only for Skoda this source ?
Thank you!
When it comes to MIB3, I would not risk a self-update. Not for now. There's very little documentation about what's exactly needed afterwards, since those cars are just ending the warranty.
@@mrfixpl
Thank you for your reply,
We will live with the annoying bugs...
I already did one update at the dealer , they also used a usb-c stick , didn't use the Odis software...
The problem it takes them a long time from the release of the update till it's available to the clients...
Look at the forums for the updates. I know that with MIB3 on the new Octavia NX people have shared the updates and they have been working fine. I was on the fence about trying it and one day I got a massive OTA few months ago that fixed all my bugs in my Octavia.
Sadly the right files for MEN2_EU_SKGPX_P9160L seems not to be there. Can you help? Im Stuck with a bug in Carplay that makes crackling noises. I think a Softwareupdate should solve the Problem.
Excellent video. Thanks for posting it. I ran in to a problem at the end unfortunately. When I click start to do the update in the car I get the following alert. "Unable to read the file meta-information" "Can't use Update Container. The current Software Download application is too old"
@mrfixpl Do I get any other benefits with the newer software? Can I also add voice control? My Škoda is from 2017. Great video by the way!
Mostly system stability improvements. But if you force foe example FW update from 02xx to 04xx on Technisat units, you will have couple small additional features.
@@mrfixpl how do I force FW 002xx to 004xx? And is that worth the effort? And what about voice control is that possible to add? Thanks for help!
The Amundsen system in my 2015 Skoda yeti stopped working one day and gave the code emergency update please insert disc. Then repeated this over and over with the unit locked so that I couldn't turn it off until it flattened the battery so I had to unplug it. plugging it back in produces the same results. How do I fix it?
I currently have MHI2_ER_VWG11_S2125_1
(MU: 0343) what will be the latest firmware? the website you provided shows me the latest MHI2_ER_VWG11_K3342, it is the correct firmware? because this new one is K3342 and currently instaled is S2125_1
Hello,
Thankyou for all the super helpful videos. I have an MIB2 Technisat unit. After i follow the instructions
1. Enable the Green Engineering Menu
2. Install toolbox
3. Unlock App Connect.
Would there be a way to go back to original stock firmware with all the 3 things back to how they were? e.g: Disable Green engineering menu, Uninstall toolbox and Lock app connect. Asking because if i sell the car then i want it to be back to its original firmware so that the new owner doesn't know that i messed around with the system.
"Can't use Update Container. The current Software Download application is too old." What seems to be a problem here? Thank you.
I am glad that you are showing to us the other kind of opening such a feature. Which can be sometimes useful. I would like to ask can be this used also on the radio from Skoda Octavia 3 Swing 3 (MIB2) SW: MEN2_EU_SKGPx_P0080L MU: 8755? The radio shall support Apps but I took radio from other car then I unlocked the CP (not me one guy who has all tools for it ODIS and licenses). I lost the Android/link because radio was mount on other car. So basically I am looking for some solution and this looks like the one I am looking for. Now, it depends if I can do it on the Swing3 technically it should works. Could you somehow tell me if is possible please?
"Hello everyone, for a couple of days now, my VW CC RNS system (I think it's Composition Media) has been acting on its own. It opens settings and executes commands spontaneously. Can anyone tell me what could be the issue? Even the reset doesn't work, and it happens even when the car is turned off, as I initially thought it might be a steering wheel problem."
Hello mr-fix, I am getting an error "Unable to open file release information" also I am getting a message poing up some times which say error updating. Have you meet something like that before? After a check online I have spoted that most of the people who are getting this errors are with HIGH units could this be the problem ?
MSTD_EU_SK_P6230?
Flawless on Octavia 1.6 TDI 2017. Thank you
Happy to help!
hi I have a question where can I find the firmware (mst2_eu_vw_pq_p0254t) foor unit 5c0035680B ?.. I have looked up mibslution but i found nothing tenks
Mam skodę Yeti z wersją MST2_EU_SK_PQ_P0138T. Wg mib-helper najnowsza możliwa aktualizacja to 0353, jednak na mibsoluton nie ma 0353 tylko 0253. Skąd mogę pobrać nowszą wersję i czy możliwy jest update z wersji 138 do 353 (lub 253 jeśli nowszej nie będzie)?
Can u do a video where u update from MST2_EU_SK_ZR_P0369T to MST2_EU_SK_ZR_P0480T ? thank you.
If I have several SWAP functions unlocked (officialy, not patched) will they stay after update?
Hello . Looks very simple and easy . But does it fix also the revers camera ? I have a kodiaq rs and the camera sometimes it's blurry ! Tnx
jak pobrałeś mapy to ( a na video sie tobie to udało ) to czy mógłbyś je gdzieś na priv serwer wrzucić?! pobiera około 700 mb i stop... a całośc niby zajmuje `` 26Gb
What is de difference with the files on MIB Solution where some are available with AIO and without AIO? What is extra in the AOI versions?
where els to get updates
Hi there - does this file update work for MEN2_EU_SKGPx_P916OL??
Are there any free updates for 2013 audi A5 3g+ (firmware,maps etc)? Thanks in advance!!
Jak włączyć mib 2 bo w moim Columbus po podpięciu tel kablem nic się nie dzieje oprócz ładowania
Dla czego z USB nie zadziała skoro wyskakuje komunikat że wykryto aktualizację ?
I went from P0245T to P0253T in my VRS but I want to know if I can go to P0480T - I searched online for answers some people say no you can only go with firmware that matches the P02XXX - does anyone know for sure?
Hi mate. Did you get any answers on this? As I have the same. Mines a PO353T and want to know if I can go to a PO480T
Hi, how do you update a Delphi version?
I don't think there was Delphi unit for Skoda. But the update procedure for Delphi is the same. Download package, extract to SD card, trigger update from hidden menu.
😊 thanks 👍
Hello select source is not coming in my kodiak Columbus 2019
Hi i installed myself all seat sound system in mib2 seat 2015, and configured with vag com to 9vd and now i have subwoofer control but the volume of subwoofer doesn't change. Do i need yer or yes Vag can pro? or i can activate in other way? Thanks in advance
You need dataset/parameters for this.. can be done with vcp yes. Done loads of them
Thx , all worked perfect on my Skoda Octavia 3 2018.
Witaj @mrfixpl
Po wgraniu plików na kartę SD wyskakuje mi komunikat o niemożliwości odczytania meta danych? Co robię źle? Postępuję zgodnie z tym, co pokazujesz na filmie. Doradź proszę 😢
Format SD CARD on FAT32
Kolego, dzięki za świetny poradnik ;)
Można od razu przeskoczyć z P0245T na P0480T? Czy trzeba coś dodatkowo robić?
No. Need modified metainfo etcetera.. Would stay in same sw version trains
Mam problem po włożeniu kart SD i wybraniu wersji wyskakuje mi informacja
Nie można odczytać pliku Meta info
Dependecies of update not met
Mam to samo na różnych wersjach aktualizacji ściągniętych z podanej strony. Aktualnie mam wersje 0361
Ty, but there is no firmware for men2 lg
W wersji Amundsen wykonuje sie tak samo?
what is ITR in the hidden menu?
Hello, how to unlock CarPley
A masz po Polskiemu ten filmik
Możesz sobie zobaczyć to: ruclips.net/video/RU3a3YXGIsY/видео.html
W prawdzie VW i dodatkowo z patchowaniem, ale to co najważniejsze będzie się zgadzało.
Hejka
Mam pytanie ,
Czy w starszej wersji da radę tak zrobić update,czy muszę zhakowac jednostkę,tak jak Ty na polskim filmiku??
Moja wersja to P0245T
Jaki format karty? Ntfs, fat, exfat?
Fat32, mała jednostka alokacji.
@@mrfixpl dzięki, będzie robiony update, a będzie jakiś odcinek odnośnie przedniej kamerki? Pisałem do Ciebie z pytaniem na priv ale nie odpisałeś. Zabieram się powoli za to i chciałbym się dopytać ;) pozdrawiam, super robota
Niestety projekt z przednią kamerką w MK7 nie zostanie przeze mnie dokończony. W Listopadzie sprzedałem Golfa.
@@mrfixpl szkoda, aczkolwiek zainspirowałeś ,mnie i będę coś z tym działał w bliźniaczym modelu jakim jest octavia 3 fl
I have a golf 7.5 the current software is MEN2_EU_VWGPx_P9260L
there is a new software witch is
MEN2_EU_VWGPX_P8050L
I could not find the software to download it in the MIB-helper.Could you assist me please. Thanks
?
The log in dont work
@@michaeljohansen9902 works for me i just checked it
Hello i need help i ordered a wireless carplay for my mk7 2016 and i have stock MIB with connector i am unable yo connect the wifi carplay with my headunit what would be the procedure to make it work if i upgrade to MIB2 will it solve the problem?
Which firmware you have right now? If you have MIB1 (MSTD or MHIG) - there's no CarPlay support in those units. Neither wireless nor wired. You would have to add a CarPlay box under the dashboard that goes between the main unit and the display. It around 250 Euro on AliExpress.
If you have MIB2 (MST2 or MHI2), there's most likely a chance that your unit supports wired CarPlay. You would only need a wireless adapter like CarlinKit.
Definitely cool for Skoda owners.
Thank you for this. Upgraded my Skoda Fabia. Now for the maps.
Great videos. I am trying to update my VW polo 2016 MST2 to the latest P0480T. When I try to update it says ‘Unable to read the file Meta information, can’t use update container. The current software download application is too old’. Im on P0138T. Cheers
Ofcourse it dont work. Your sw version is 01xx you cannot update to 04xx sw. In your case, 0140 is the latest sw version you can do...
Alsway stay in same sw version 01xx to 01xx, 02xx to 02xx, 03xx to 03xx, 04xx to 04xx.
Thanks. Also I’m having trouble changing the code (error 1555) on both my vw polo and Skoda Kodiaq. I manage to find confirmation of installation change. Replaced code using MIB-Helper. It says changed but then goes back to original. I’m using vcds. Does the stereo have to be turned off? Cheers
Can you clear the fault code with Carista? Also, what if you don't clear it at all?
Carista Dongle + CarScanner app should fo the trick
Thank you! Great content on your channel :)