Cool idea! Don't throw away old car parts!
HTML-код
- Опубликовано: 21 апр 2020
- Cool idea! Don't throw away old car parts!
I welcome everyone to my channel! My name is Dima - I'm the author of the Men's Craft channel.
I am fond of tools, as well as doing unique things which cannot be bought in the store.
Subscribe to the channel, it’s really interesting here !!!
#craft #wood #diy #tool - Хобби
Do you like this system?
cool
Yes, thank You. I can make it. Для меня дорого купить сверлильный станок, но теперь я могу сделать.
Yes I’m going to make a robotic trash compactor like the film so need some inspiration 👊 well done and thankyou
Its quite a creative system, it is also complicated to make, but I am sure the benefit is worth the effort. Are those car shock absorbers?
Yes you are right, these are automobile shock absorbers
Я одного понять не могу, что это за супермен с золотыми руками что поставили дизлайки? Покажите свои самоделки,!!!!!! Автор видео огромный молодец, отличная затея, много конструктивно правильных решений!!!!! Вообщем большое спасибо взял на вооружение!!!
Я дизлайк не ставил но на деревянном бруске видно что отверстие не по центру.
Dude!!! Been wanting to make one myself and didn't have anything to use for the down feed, but your chain and sprocket idea is perfect, I have several bicycles lying around, THANKS!!!
Thanks dude!
@@menscraft7985 ...............................
.................................
........................................................qqq
¡¡ ESPECTACULAR !!GRACIAS por compartir tu conocimiento. Ya hecharé manis a la obra. FELICITACIONES. Saludos desde Provincia de Córdoba Rep. Argentina. BUENA VIDA.
Necesito ver hechura de cortinas enrollables y portones de varios estilos
Espectacular, genio todos mis respetos.
Saludos desde Argentina!!!
Hello Baku
I love it! I get it, the metal in those brand new parts and Milwaukee drill are old and existed on this Earth long before us. Great video!
🖐️🖐️🖐️🏡🏡☕☕☕😁😁
@@thelk1851 ool
@@jairojesusdelfinavendano3981 o74hm
Trabalha de profissional, perfeito. Muito obrigado por compartilhar com a gente.
De Rio Branco (ACRE) - Brasil
Fantastic use of scrap metal and car parts. Your fabrication is nicely done.
Brilliant... how clever is that! Your videos are great.. love the suspense. I didn't figure it out until the handle appeared.
Thanks buddy, glad you appreciated my efforts
So amazing! he got many skills,
I want to valorate your hand work capacity. I liked so much. Thanks!
This is brilliant idea mate. I alway wondered how to solve the alignment myself for a similar project, but you nailed. Well done. Great work!
In one of your video, I caught a glimpse of that chain on drill stand, since then I was rummaging through your projects. Found it!! That's a great idea, thanks for your valuable education!
Que buena herramienta,muy hábil para hacer eres un profesional
A lesson in construction and a pleasure to watch.
You got me just on this 1 vid, if this is an example then I'm looking forward to many more inspirational moments👍
Genial!!!! Saludos desde Paraguay.
отличная идея и прекрасное исполнение! точность высокая в изготовлении, перекос промерян, его нет и это отлично!
На девятой минуте всё ещё не понял что это, но смотрится интересно и красиво.
Чудо страна! Одни в чермет сдают исправные станки и оборудование, а другие из .овна и палок изобретают "велосипед".
Эх🙄 это точно !!!
Anyone else's OCD kick in when you saw that the 2 grease fittings weren't both matching the same direction? Lol great build brother! 👍🏻
Hello🖐️🖐️🖐️🙏🙏
You're like a mad scientist that is also a genius. I love your projects.
I gotta GET me one of those cabinets! Just lay the parts inside, close the door, and when you open it again, CLEAN PARTS! Amazing! =0)
Seu projeto merece mais que parabéns 👋👋👋
Me gustó tu idea de trabajo con materiales reciclados, te felicito desde PERÚ.
😀🍾👍🏆🥇👋👋. Muy bien hecho. FELICIDADES. Saludos desde Barcelona Cataluña
Just love it. So more satisfying than buying one....something to be proud of.
One of the best diy tool video in youtube.
Thank!
Projeto exelente e perfeito, parabens !
Show de bola ficou muito bom mesmo parabéns pelo seu trabalho
Excelente me gusto tu trabajo.talvez si le agregaras un motor de lavadora para completar el reciclaje.solo es una sugerencia.saludos
Bravo! Amazing work. I plan to make one myself, but I have a doubt whether it should be a fast drill or electric impact screwdriver
Pues yo pensaba que iba hacer una prensa hidráulica. Pero me gustó la idea de usar la cadena como cremallera.
Muy buena idea !! Me dió otra mirada para fabricar un sistema para una maquina similar!!
Es genial lo que haz hecho . me gusta mucho. te mando saludos desde la Paragonia Argentina muy cerca de la Antártida.
Excelente! Trabajo!!!! Muy bueno!!
7:28 Brilliant!
Лучшее что я видел!! Если буду делать себе сверлильный станок, то только такой!!!
У меня как раз две каябовские стойки без дела лежат. Буду делать.
@@user-nx1kv3nx5t А я пошёл метало приём и за 3 т.р. купил заводской правда без двигателя.
Сделал?
Not a bad idea. I just seen an accident abut a lad getting his gloves stuck in the rotation part and the k Lt thing that saved him was the belts slipped slowing him to stop the machine. That 1/2 arm remover is another story good luck if you get something caught in that one
Not supposed to wear gloves while operating rotary equipment. Sleeve bands are a good idea too.
Excelente fabricación taladrado de mesa muy buena saludos👍, de 😌Venezuela
Parabéns. Bem complexo Ms MT criativo
Dude you got every single power tools brand on you ... great videos btw
Perfect congratulation.👏👏👏
Cool!
That's dope! Putting that on my To-Do-List.
Как всегда лайк приятно смотреть на твои поделки
молодец здорово удачи и новых идей .
That's one of the most magnificently over-engineered pieces of post-apocalyptic madness I've ever seen.
Fucking love it.
o7
Thank you for shielding the arc. :)
Great job. Congratulations!
I wanted to be mad at the lack of car parts, but this is pretty good. Great job
мне понравилось, да и быстро сделал за, почти, 13 минут.
А так два три дня наверно ушло))
Excelente hermano muy bonito estetico y original trabajo genial t felicito saludos desde Venezuela
I love it in making that device!!
Well done!
To check the strict perpendicularity of drilling, you can turn the wooden bar shown at the end of the roller and drill the same hole again! If there is an ellipse at the output, then it will be necessary to adjust the frame with washers! Oh, so - everything is fine! I liked it!
Для проверки строгой перпендикулярности сверления, можно деревянный брусок, показанный в конце ролика, перевернуть и снова просверлить то же отверстие! Если на выходе будет элипс, то надо будет отрегулировать станину с помощью шайб! А, так - всё отлично! Мне понравилось!
Beautiful recycling!
When bolting though box action I like to tack in support tubes to stop the bolts bending the box section inwards. On side cam be bolt diameter (no weld needed. The other side is tube diameter and welded around.
wowww, that is iintelligence, skill, genius............congratulations on nice project.
Thanks buddy!
Gostei muito desse suporte de furadeira muito top ficou legal abraço amigo que deus abençoa
Thank you for shielding us from the arc from your welding. Some guys don't get that even in video that light is blinding. Also, thank you for not subjecting us to elevator music.
Красиво, прочно, надежно, годно к изготовлению и эксплуатации.
That was awesome. Thanks for sharing. Good job my friend.
Thank you friend!
Шикардос! Шедеврально!
*Лайк из ЯНАО , молодец , умеешь правильно руки применить.*
The work of a genious, very inspiring.
Before I realized what you were making and watching all the hand drilling, I was thinking "if he can afford a mig welder why doesnt he buy a vertical drill press?" Then it all came together.... great job!
Same thing I thought haha
You the man 👍 respect for what you can do
thank you friend
@@menscraft7985 🖐️🖐️🖐️🖐️
Bravo, magnifique travail.
Criatividade dez, elaboração mil finalização perfeita
Слов нет мастер на все руки.
Wow !!! Legend !!
I really do enjoy your tool. Making. However, I don't have a welder and you use shock abso6s quite often. I'll take a look at each but if if it rnvolves welding, Im not interested.
Приятно смотреть когда работает профисионал.Удачи тебе .
Very creative. I thought you were going for a hydraulic press or drill press when you started. Curious about the cylinders. What did they come off of?
Отличная работа и видео смонтировано СУПЕР. Я сперва "луканулся" смотреть с небольшой перемоткой, но вовремя отказался от этой затее . ЛАЙК! .
Nicely made and I get the build it yourself thing, but I can buy a drill stand for a lot less than the cost of the steel used in this.
Perfecto
Good Idea
Simplesmente pura arte.....
Parabéns! Muito bom!
Спасибо за идею применения цепи и звёздочки.👍
Очень классный станочек. Хотел бы сделать такой же. Скиньте пожалуйста размеры.
what if the shock rods are bent slight ? i have got an ATB bycycle.
Vale a pena conferir seus vídeos parabéns.
Genial quedo pendiente bien 👍👍👍
Parabéns pela ótima ideia.
Браво. Отличная работа. Молодец. 👍👍👍👋👋👋🤝🤝🤝
Brilhante projeto.🇧🇷🇧🇷🇧🇷
Great bit of kit. Great work
Отличная идея и исполнение супер. Очень красивая работа. Подскажите чем он сверлит, что за коронка такая многоуровневая?))
Спасибо за идею. Попытался повторить с небольшими изменениями. Сделал сверлильный узел с переставляемой высотой. Все получилось! В ответ можно загрузить фото?
we filipinos are very creative.if only the government could support these inventors,they could create usefull machines and tools for the farm and for our home use.
Отличная работа. Молодец!!!
Que ideia genial parabéns
Bravo!
Bon travail 👍👍👍
Точность позиционирования высокая. И усилие большое!
Первая минута:
- Я воду лить не буду...
Восьмая минута:
- Я БУДУ ЛИТЬ КИСЛОТУ!!!.
Perfect
Man, this guy works fast!
Te admiro saludos gracias.
Красавчик!!! Очень здорово!!!