It's very simple! But not everyone knows how it works!
HTML-код
- Опубликовано: 5 окт 2023
- Did I really build this!!! Perhaps I didn’t waste so much time in vain?
The best project of my channel! Yes it was difficult!
Friends, today I’m doing a project that I’ve been planning to do for a couple of years, I finally pulled myself together and implemented it, to say that I’m happy is to say nothing, I hope you like it too! - Хобби
Friends, today I’m doing a project that I’ve been planning to do for a couple of years, I finally pulled myself together and implemented it, to say that I’m happy is to say nothing, I hope you like it too! Write your comments and wishes in the comments!
Here it was, early going into the video, I was asking myself: What on earth is the guy making this time around??? Well,
I couldn't possibly guess just what it was until the very end! All that I can possibly say is wow! Wow! What a great setup!
It's a work station that can be used for several operations, revolving around the use of router table with interchangeable
router throat plates and yes there is yet more to come! VERY NICE!! Great job and very well thought out, there Dima!!
@@craigtegeler4677😂
LOL.. I like them because I try to guess what is the build... if I can't wait, 12:15 I skip forward a bit.
A couple years of planning paid off well. An absolutely brilliant build, regarding space , function and craftsmanship!
The design and the workmanship are excellent, but I wonder if making workshop equipment to furniture-grade levels of finish doesn't make the projects a lot more complicated, time-consuming, and expensive than necessary. And easier to procrastinate. There's a saying: Don't let the perfect be the enemy of the good.
I don’t like spending time watching a video of something being made when I don’t know what it will turn out to be.
Then don’t watch it
@@pjv767b5 I didn’t. But I thought they might want to know why they lost a viewer.
I know, right?
I just skip to the end if the thumbnail or first minute looked promising, otherwise onto the next. Cheers!
I had to check I hadn’t dozed off and another video had started!!
Bob
England
I don't recall seeing a more impressive use of double-stick tape.
Great video. I'm reminded of how much I miss my workshop.
I enjoyed watching you bring an idea of yours to "life" using carpentry. I look forward to your project's completion in order to appreciate what it is and what it is used for. Thank you and Best Wishes! 🙏🙏🙏❤💐
I have the same Bosch drill press, is ideal for my small work shop. A pleasure to use.
You have really got some SKILLS!!
Very impressive work. I’m very very jealous I wish I had the tools and a little knowledge that you possess.
Genious idea....you kept my attention...had no idea what you were making. Love it! That design can me used for multi uses. ie gardening (potting table in garage/shed) endless ideas... THANK YOU
I am able to do things around my home that many women would not attempt. Gives me a feeling of self reliance, confidence, and is a huge time saver vs waiting for someone to show up to help. But even at that, I could never do what you do in this video. My mind is not built that way. Fascinating to watch and I admire your creativity.
I admire your craftsmanship but even more your design capabilities. As many others I wan't able to detect what You were heading to.......excellent idea !
I have to admit , I had no idea what you were building until the very last ..... Excellent craftmanship
Fantastic craftsmanship and attention to detail. I am always in awe how FAST all the DIY RUclipsrs work. 🤣👍
Watching someone woodwork like this to me is like performing a miracle because I have a hard time just nailing two pieces of wood together.
To be fair can be hard sometimes lol
I end up smashing my finger then get pissed off and throw the hammer😂😂
But your humility is admirable!
It's always enjoyable to watch a real craftsman at work, well done sir.
Great design! 👍🏻👍🏻 Thank you for sharing!
You rock as a wood carpenter. 👍 A man after my own heart.
I just wasted a measurable amount of precious life watching some guy build something that throughout the vid looked to be something special! The skill and speed at which the carpenter was moving kept me thinking that his build would be finished any second now- nope- hardly!
Finally the fished product- a hide away routing table. I’m very impressed with the tidiness, speed, and
precision of his project. With all that said- if he had let me know what he was making, I more than likely would not have watched the video. Why? Because I don’t have any use for it, because I already own one.
Don’t get me wrong, I have much respect for the builder- he clearly has some Maaad Skilz in his toolbox! I just would have liked it to turn out to be something I needed!
When that thing is folded-up it's beautiful to look at, it stores out of the way and when it's deployed its still beautiful to look at and with a little imagination it could be a hundred things other than a router table and tool storage cabinets.
Nice Router table with lots of storage. Excellent craftsmanship.
Beautiful, great looking table.
In the next video he builds an automatic transmission for his car out of three sheets of plywood.
Great build!
And still has enough off cuts for a cabin
Really enjoyed this video! Lots of tips and tricks to add to my bag, thanks for posting.
I have made a stationary cabinet with the router underneath,it takes space in my little shop.but I like this better.Great workmanship.
Always good to watch craftsmen in action👍.
Very nicely made router table! I'm impressed.
Extremely Clever!!! Thank You for sharing his!!!
I am not a wood worker but I am an artist. Anyone who can not see the art and skill here, totally missed the point! This was fascinating! I’ll subscribe.
Cool! I have very little space in my "shop" as well, definitely, it would come in handy. Drawings would be greatly appreciated!
Damn! One of the most intelligent router stations I've seen so far.
Very nice piece of shop furniture.
Loved watching this come together without knowing the end result. Appreciate the care for aesthetics too! Well done!
mesmerising - had to watch all the way as I could not work out what final item was until very near end. Excellently😊 done -
Great design! I love it.
This is really a neat gadget. Thank 4 sharing. PottsvillePA.
That is awesome thank you for sharing...
Lol!! You got me! That was a slick little build. 👍👍👍
Excellent work 👍
You are so gifted!
I have to admit, you had me intrigued during your entire build. I couldn't figure out what was your project. But the end game of it. It's a pretty good idea and very well done, very well built, looks very very nice. The only down side is with this type of router station, you will have a lot of trouble with dust collection. Cause there's no way out of it, you need the router well enclosed & dustproof, and a lot of space for your piping to be beneficial. But aside from that. Congratz. You did a beautiful job, well thought of, and well built. Good luck with your upgrades..
Thank you for appreciating my work. I completely agree with you, in the future I am going to improve this project, including working on dust removal. Thanks again!
Absolutely brilliant, an inspiration.
Great video. I have a soft spot for A30s. The first car I remember my Dad buying was a green A30. Spent many, many hours over about five or six years in the early sixties in it travelling far and wide. I hope you manage to get this one running, you deserve to after all the hard work you've both put in!
The furthest back I can remember, my mother had an A30.
I grew up thinking these cars were called "Back You Goes" because she always opened the door and said "In the back you go".
My father had a Princess Van Den Plas. I loved the long journeys travelling in Dad's car.
Enjoyed that very much! And it helps when you have the right tools for the job, wood working has never been a strong trait for me. I do admire those that have gift for making projects this had me very interested I was thinking each step what it was going to be and was I way off base!
Very cool, clever and nicely done!
That finger-wag is my pet peeve. I really enjoyed the video right up until then.
Great idea, nice execution. I might have to consider making some wall space for this!
Awesome video and excellent craftsmanship!!
Wow!! Very nice design and excellent woodworking skills!
A foldaway workbench - just put that in the description.
An extraction system would also be nice. Next time 🙂 NIce work, well done!
Excellent !
Man, he put a lot of work and effort into that production, Job well done! Steve
EXCELLENT presentation !!
Such beautiful work! Was a pleasure to watch, even when I didn't know what the final product would be.
ThaT is a great project and workmanship imo. Like the little details litke the plugs and rollers.. Nicely done there Sir. Kudos.
Loved watching this as was intriguing by the initial photo on Pinterest.
After converting our garage I now have no space to call a workshop.
I have total tool envy I cleared them out
Absolutely love your idea.
Double sided tape..brings back memories of being a kid.
I need a home office that hides my monitors when I'm not working so I'm following 😊👍💪
Absolutely great ideas
You're a great man Rudy and millions know it.
Great skill at making and designing shown. I also appreciate the high speed with which I was able to watch your video, caused no doubt by your skillful editing , which must also be tedious and time-consuming for you. Thanks much!
Classy .... both design and materials !
You are a genuis bro, thanks for posting.
That's clever well done 👏 👏👏👏
that was fantastic, to watch! I enjoyed the "sound effects". thank you for posting this - and keep up the ingenious creations. Thanks again, brother. Greg (garden grove, CA)
Very simple indeed if you have all the tools in the world!
Oh my gosh. That was so easy!!! If only I had the tools and knowledge to do that. How could I have not known this my whole life 😂
I like it. Had no idea what you were up to for most of the video lol. Thanks for posting :)
A great projected well executed.
Talented fella...nice work.
Pretty cool & ingenious stuff.
What a lot of work.
Wao amazing and a unique idea for good resorts
Очень хорошая идея))) . Успехов в новых проектах!
Absolutely fantastic well done you
Remarkable and great ingenuity!
Thank you for appreciating my work!
It's amazing!@@menscraft7985
Great Work!. Never seen a plug maker before.
Good Idea. space saver and set place for router.
Un buen trabajo, gracias por enseñarnos. Le escribo desde un pueblo de Jaén, Castillo de Locubin, Andalucia
Well, I enjoyed it. Good job 🌞
Dude that is awesome. Great job. Enjoyed the video too
Very cleaver. Thanks for sharing. Ron PTL USA
Great project, i love it.
Great Work!!!
You are a freaking genius! You really need to put router/router table on the title. OMG, if only I had an ounce of your talent, I’d attempt that.
awsome....you finally got time to do something for yourself....well all right....about time....ha..
god blessed you...
I like to see new ideas how you cand improve and save space in work shops
First time viewer. Fantastic job. Love the editing and speed. Very relaxing to watch. Just subscribed and looking forward to future videos.
You really need to drill and tap the base for a starter pin. Makes a huge difference. Nice job.
Brilliant just Brilliant .
asmuch as i admire your craft. that is one hell of a big effort to use a router inserted into a tables underside
But it only took him 12 minutes and 14 seconds!!! 😁 Amazing work.
Having the right tools would cost you a fortune! And for what result??
Awesome dude - entertaining and informative 👍
You are a genius.
Very handy strong fold away table,space saving also
Подробно. Профессионально. В тишине. Красиво сделано. СПАСИБО.
Fantastique ! J’ai appris beaucoup de choses en vous regardant.
Most impressive from concept to creation, true skill!
Отлично получилось. Спасибо за идею. 👍
But your very gifted imagination is impressive!,, Nice job..😊
Simple my arse , but vey clever . Love your skills .
It would help to know what you are building before you start!
I didn't know, either. So I just clicked on the time bar to the end of the video to find out and skip the middle of the video. Once I did that and found out it was nothing I wanted to make, I stopped watching.
Great tips, thanks!!
Great project. Would you provide or sell plans?
Ditto! I am interested in plans as well
I did it without drawings, it was all in my head, but I’ll try to solve the issue with drawings.
Great vid! Would only suggest that when installing the plugs I would orient the plug grain to match the work piece.
Again, a great vid!
Wow great idea.
Great ball cap!