Detailed Blend Air Door Replacement for 2010 to 2015 Camaro without Removing Dash.
HTML-код
- Опубликовано: 24 авг 2024
- This is my 2nd more detailed video on replacing the broken blend air door on the 2010 to 2015 Camaro without needing to remove the dash.
Tips for doing this job. • Tips for Replacing the...
Blend Air Door
amzn.to/3XuxkRi
Micro Torch
amzn.to/3QSmnGP
Torx Set
amzn.to/3XJJt4r
Astro Pneumatic Tool 1828 ONYX 3/8" Nano Impact Wrench v2 - 500ft/lb
amzn.to/3HkIDFZ
1/4 Drive socket set
amzn.to/3iTQmBE
Precision Hobby Knife Kit
amzn.to/3XsVJqj
Titan 1/4-Inch Micro 90-Tooth Swivel Head
amzn.to/3uN74m7
Link to first Blend Air door video
• 5th Gen Camaro Blend A...
737mechanic Amazon Store Front
www.amazon.com...
Blend Air Door
amzn.to/3XuxkRi
Micro Torch
amzn.to/3QSmnGP
Torx Set
amzn.to/3XJJt4r
Astro Pneumatic Tool 1828 ONYX 3/8" Nano Impact Wrench v2 - 500ft/lb
amzn.to/3HkIDFZ
1/4 Drive socket set
amzn.to/3iTQmBE
Precision Hobby Knife Kit
amzn.to/3XsVJqj
Titan 1/4-Inch Micro 90-Tooth Swivel Head
amzn.to/3uN74m7
Link to first Blend Air door video
ruclips.net/video/K0jajaoc-ro/видео.html
737mechanic Amazon Store Front
www.amazon.com/shop/737mechanic/list/CR3BU74FTDU1?ref_=cm_sw_r_cp_ud_aipsflist_aipsf737mechanic_W4QMHMJ1JD67FDBCQHRK
I came back to say thanks, Chris (737mechanic)! I followed your instructions and 3 years of no A/C in this Texas heat has been resolved. Saved me $5k from my local shop. I used an electric hot knife from Amazon. Took me about 4 hours because I ended up pulling out both seats to deep vacuum and shampoo the carpets lol.
Glad it was a success. And thank you for the nice comment.
Did mine in 2 hours. Great video. Used gorilla tape as a seam sealer when done. Worked great.
Gorilla tape is the best way to seal the door and you can take it off easy when you do the job a second and third time. Which you will. I've done mine twice.
Any tips in addition to the video you may have?
@@cindym.4186 yes after replacing the blend door try not to put your ac all the way down. Go one notch above . This prevents excessive torque on the blend door hinge.
Man, you saved me a quoted $1700 to repair this. I replaced it yesterday following your incredible step-by-step video. I can't thank you enough, God bless you Brother!
I am glad it helped.
I took my 2014 and everyone is trying to charge me over 2k. Was there anything you had the most trouble with? Any tips?
@@cindym.4186 I have 4 videos that cover everything.
ruclips.net/video/9_MCS8o3BDc/видео.html
ruclips.net/video/4CmSZka0RUs/видео.html
ruclips.net/video/K0jajaoc-ro/видео.html
ruclips.net/video/mi9Gvjq2CzA/видео.html
@@cindym.4186 It was straight forward according to the instructions. If you're having trouble getting it out, there's probably still a part that didn't get cut well. I used a card knife I bought a while ago and it worked well with a butane lighter
This was the best video for doing this that I found. He doesn’t talk too much, just enough to help you if you need it and the video was good for the space you have to record. Very helpful and I completed in about 2 hours, and AC works great again!
OMG!!! This video is the best!!! Thank you!!! I am a female, I am a nurse, not a mechanic…. And I was able to follow step by step and fix my AC!!! I was able to get the last part back in without removing any parts, just took a little muscle… thanks again !!
Very impressive, I had a mechanical engineer drive from Louisiana to have me do it after he gave it a try and got half way through the cut and gave up.
Are you in Houston Tx by any chance? I need help with mine! 😂
@@M1shell31 I am in the dallas area.
@@737mechanic I’m in the Dallas area and definitely need some assistance! How can I reach out?
@@ggb4life You can email me at mechanic737@hotmail.com
Someone give this guy a medal!!
I could cry, I have AC and heat again for the first time in months thanks to this video (and my husband for doing the work). I almost croaked when the repair shop told me the total cost could get up into the thousands.
My husband did use the weakest setting on his dremel and a bit with low profile teeth to speed up the plastic cutting, and managed to execute it perfectly.
This video was a huge help and I just spent the weekend working on my 2015 Camaro RS. Followed all these tips and instructions and would have gave up for sure if I hadn’t heard and seen it done on video. Thanks for saving me a large bill at the dealer!
dis you disconnected the battery for the BCM??
Great video. Dealer and another shop wanted $3000 to remove windshield and dash for a $15 blender door.
I followed your instructions step by step. Used a heat X acto electric knife. Took 5 hours cuz I took my time reviewing each step. AC is Freezing now! Heater is hotter than Hell.
Thank you so Much!!!
Joe...So California😎
Thats engineers for you. Im not fond of the idea of cutting that plastic to get to the door but im also not aboit to pay 3k or do all that for a 15$ part. Guess ill need a knife.
I just saved myself 3500$ thank you brother, you're a lifesaver!
First, thank you so much for taking the time out to show us how to replace the blend door. I live in the midwest and my heat stopped working about 2 yrs ago. I was very nervous about doing this myself especially with the heatee core being so close to the blend door but I was able to fix it with no issues. For any woman reading this, if I can do it so can you. Just watch his video from beginning to end first, get every tool that he suggested, remove the car seat and get a pillow for your back then go to work. It might look challenging but it's not. Might is back working now. Again, thank you so much!
I had an engineer drive from a neighboring state to have me do this job that he started and got part way through and decided it was too much to finish so you should be proud. I have done 15 of these now and most have been for men who didn't have the confidence to follow the video and do it themselves.
Good job and glad it helped you.
Man, I thank you so much for this video! $25.00 for the part and my time!!! I saw quotes upwards of $3000 to take the dash out and replace the blend door. 😢 Yikes! I followed step-by-step, and I appreciate you! May the Good LORD Bless you!
Thank you for the nice words.
He helped many people may good luck come to him for helping a fellow human.
2015 Camaro LT 65,000 mile on it, had the AC on noticed warm air/cool air mixture blowing immediate thought was low on Freon popped the hood high side of AC line ice cold. So I ordered a bore scope for my Iphone and a blend door. Most likely the blend door hinge is broken. Thanks for the awesome video. Update to come.
So got the bore scope took a little to manipulate the camera to the blend door actuator area but yep the hinge is broken and actuator is working. Ok time to go get some beer and start the cutting.
For anyone that doesn’t have a scan tool. It’s not 100% necessary. All I did was disconnect battery and after finishing and connecting everything back. The only problems I encountered was tpms was all dashes and the compass was saying “CAL”. But literally after driving it for 5 seconds everything went back to normal. With the patience and tools you’ll get it done.
Great video! Thank you sooo much! My son and I just did this to his 2015 Camaro and it worked like a charm!! We were quoted 1800 to 2200 from various mechanics. It cost us $50 in parts and tools and took 3.5 hours. Awesome video, thanks so much!
Just wanted to say thank you. Got my kids 2013 heating again. Silly me thought it was the thermostat. Thank you for your video and giving the average Joe confidence to tackle what the average person wouldn’t try!!!
Glad it helped you.
Thank you so much for this detailed video. I watched it a few times, and I just successfully did this fix on my car. I had a shop quote me 1300 to fix it, and it only cost me ~$30 and some time!
Amazing video dude! I have a 2013 Camaro with 67k miles on it, it seems like most people are having this issues around 10 years give or take of use before that door breaks.
I’m at the ten year mark and I’m having this issue as well. Hopefully I can fix it myself. This is a great video!
I finally replaced my blend door last night. I started at 9:45p and by 11:30p the new part was in and secured. I think I could have knocked this out even quicker but a few things held me up.
1. The plastic piece that you cut off to access the blend door, TRIM it like this video suggests. I tried to put it back in without trimming it and I couldn't align it right. I fought it for a while before giving up and then trimmed it. It went in right away after.
2. The AC vent tube that is removed at the beginning needs to be put in first when you are reassembling it and the BCM pieces/wires. I tried installing the BCM first and then the vent tube and failed miserably. Once I took out the BCM (and the bracket it is in) the vent tube reattached easily.
3. Get a GOOD light. I can't stress this one enough as there is very little room down there to work in and you can't see anything without a good light you can reposition over and over to get good views of everything.
If you need something good to cut the access door with, I hight recommend this ($40) plastic welder. I bought it several years ago for other projects and it worked great for this project too! There is a rounded tip that comes with it that was perfect for the job. It took me about 5 minutes to cut out the plastic piece., seriously 5 minutes if that!!
www.amazon.com/gp/product/B00002N7S1/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Got the door cut and out today, wasn't too bad, took a few hours, but I didn't get in any hurry.
Only thing I would add is the horizontal screw for the air duct was a Hex 20 on my car and not a 7mm. Mine is a 2012 2SS.
When you get these two screws out pull down towards you and rotate clockwise, the duct comes right out.
The only issue I have now is trying to fish out the broke end, and the white connector piece, but I'll tackle that tomorrow.
I used the borescope and unfortunately, they both are about 1/2 way down to the passenger side, approx. 6"-7" away from the hole I cut.
I tried a vacuum with an end on it that would hold them at the end without pulling them into it, but it didn't reach far enough.
I guess I'll try a long screwdriver tomorrow.
Thanks for the video, made it much easier to do.
Amazing video. Stopped at harbor freight yesterday after watching your video to get the tools I needed and then replaced my blend door. Also I used a box cutter type tool and no heat to cut and it worked fine. That heater core is strong enough it just had some scratches on it
Best detailed mechanic video I’ve ever seen on RUclips
I have a 2010 Camaro with the same issue. The A/C mechanic I took it to installed a valve on the heater hose, you close it for A/C and open it for heat. He said he did not know how to fix the blend door and this way was the most practical fix he knew of.
Today I found this video and ordered a new blend door off Amazon. Also, when on the order page an electric hot knife popped up. So Amazon must know about this fix. It will be nice to switch from heat to A/C without having to stop and turn the valve and burn the shit out of your fingers. 😮
Holy smokes that was great! I believe I did watch the first video I remember you pulling that sensor out for the borescope, can’t believe how well that piece fit back on there after you cut it out, great job and thanks for sharing your knowledge and skills with us!
Great video. I kept the module plugged in and didn’t remove the seat which made it a little challenging but several hours later I had AC. Thanks!
Thank you for making this video. It worked perfectly. Just used it to fix my daughter’s 2015 Camaro SS. Awesome job.
GM lets put the heater core 1 inch from the plastic blend door so it can melt warp and snap. Great engineering!
This was the best video I’ve seen on RUclips saved me 1.5k quoted to me by my local Chevy dealership. Took me 4 hour but saved me all that money. Followed this video step by step and got it. Thank you !!!
Do mines😩😩😩
Where you from 😂 I’m also a residential heating and air technician which is why I didn’t find this to be so complicated 😂
I don't understand why a lot of people go to dealership. They overpriced everything and they do the same
Thank you for this video you saved me over 1000.00 dollars
I did it myself with the help of your video but I have a question hopefully you can help when I put the car back together and hooked up the battery I now have a service airbag light on is it possible I hit a wire under the dashboard???
They quoted me over 3000 at dealership
Thank you for your video save me $3000 at the dealer. Now heat and cooling work great again. 👍🏻👍🏻👍🏻
This is a really great detailed video.
Thanks so much, saved a lot of money.
I used a soldering iron for the hot knife.
thank you so much man, my 2012 camaro was having this issue and my dad and I followed your video and now my car finally has AC!!!
Glad to hear it.
I have to agree this is a very well and death video this man took his time show how to do it right and helping a lot of people out in this time of Overkill in expenses I'd like to say thank you
Such a helpful video. Thank you so much. I did this today and only problem I had was installing the cut back. I couldn’t seal it. I ended up just going with it unsealed and the ac and heater work. I didn’t remove the seat or disconnect the battery and everything seems fine. Thanks again.
Hello sir! I wanted to wait till the job was done. And im currently sitting in my 13 Camaro SS enjoying full AC for the first time since I bought the car over a year ago. Thankyou. Thankyou. So much patience in telling every little detail. Perfect guide. Took me twice as long,but the job is done. You're a f*ckin saint. Stay golden.
I feel like I owe you a beer man, thank you so much, I saved 2800 bucks and spend $100
Thank you, I was a mechanic, but now going to school for a new trade. I toke my car to the dealership, and they want to pull the dashboard out and break my windshield in the process just to get to it. I just replaced the windshield and now they want 4500 in repairs... Almost half of what i paid for the car just to get to a hvac valve. If you are aware of anything else ridiculous please 🙏 make more videos.
Yesssir love to see it sir! Thank you for being here for all of us Camaro bois🫡💯
Follow the instructions! I tried using a Dremel mini rotary saw to save time, instead of a hot knife. I ended up cutting into the refrigerant line...😢
Man you are a lifesaver!!! I just knocked it out today with step by step instructions from you. Thank you so much!!
It's always good to hear that.
bro where are y’all located i will literally pay someone to do this for me chevy charged me 3000 😭
@@zjokoz I am in dallas area.
@@737mechanic HOW MUCH i’m in the dallas area too what’s your number or do you have social media
where can i privately contact you ?
Well described repair. Got my fixed!
Best demo on RUclips. Thank You ❤️
I used a pocket knife and a propane torch and it worked great. I think the problem is not the door but the actuator not stopping in the correct position braking the blend door.
You’re video helped fix my heat myself. You are awesome.
Thank You, got it done yesterday!!!
This video helped me change my blend door myself. I'm 58 yr old healthcare provider. I'd like to add that there is a simpler way to check if the blend door is working. Remove the cabin air filter. Have someone turn the AC to on and over to heat. You can clearly see the blend door moving. Of.course that was after I fixed it. So if it's broken. The blend door shouldn't move back and forth.
I thought you were on to something but the only thing I could see when the cabin air filter is removed is the squirrel cage on the blower motor.
What year Camaro do you have?
@@737mechanic My Camaro is a 2015. Does the squirrel guard move back and forth when the temp is moved from cold to heat?
@@elliehorning922 So the cabin air filter on the 2013 is on the cowl under the hood. When I open the hood and remove the cabin air filter the blower motor squirrel cage is all I can see. When I look under the passage side of the dash I see nothing that would allow me to remove to see the blend air door.
I'll take a closer look at this tomorrow morning. I'm in Florida and morning is best for me to work on my car.
I've changed the blend door and it moves back and forth easily. I also changed the blend door Actuator since I was right there to do so.
Unfortunately, I'm getting cold air when I start out driving, but then it goes to warm air.
I'm thinking, I may have mixed my new Actuator with the old and put the old 1 back in.
I am going to change that out in the morning.
I'm at a loss as to why I'm getting cool air and warm air . It comes and goes.
Any idea what else might be my problem. Help help help🙏🏻
@@elliehorning922 You need to find out if the compressor is shutting off or if it is still engaged. That will tell you if it is something causing the compressor to disengage or if it is a door issue.
What an awesome video ... I gotta do this and NOW i think I can .... thank you !!!!
Just did this to my 2012 v6,
I feel like I need to send you some $$
Thank you brother
I can’t get my Front Driver Side Floor Air Outlet Duct back in and you skipped it in the video. Any advice?
You just have to keep twisting and pushing. It will eventually go.
I just did it successfully!! Planned for 3 years because I knew it would break eventually 😢
Really good video, you went through each step. I would use whatever you are using to reseal the plastic, in the little holes on the door where it breaks to reinforce it from breaking again.
This was a very helpful video and I appreciate you doing it. However I just finished doing this on my 2014 Camaro. I must say this is the hardest repair I've ever done to a vehicle in my life. I struggled almost all the way through it. Lying on my back wasn't good either it made me nauseous and sick. If someone offered me $3,000 to fix their car this way I would refuse. I did however spend the money for the billet blend door so hopefully it will never break again and if it does I know I'm not fixing it. Thanks again for your video I probably couldn't have got this done without it.
I am about to do my 16th Camaro tomorrow and I only charge $350. Maybe I am lowballing myself........
You sir are a Steely- Eyed-Missile Man! Destroyed my back, but saved a sh!t ton of money. Thank you
I did it! yay! I thought about leaving the seat in but yeah that had to come out.. so much easier.
Man I appreciate videos like this. You save me a ton of time. Even tho you gotta hack the side of the box open it actually doesn’t look to bad after you get it back together. Thank you!
Awesome video! Easy to follow!
What is a safe length to use on the exacto knife to not pierce the heater core? I’ll be attempting to do this in two weeks and damaging the heater core is what worries me the most.
I use the regular exacto knife blade and I grind down the sharp point to a rounded point to be safe. But unless you are really pushing hard on it I don't think you need to worry to much.
@@737mechanic Thanks for the great video and details! AC is blowing super cold again! I have an Xtool D7 and did the relearn. If I do this often should it be okay to move my switch to max AC or max heat or should I avoid doing this at all even if I can run the relearn monthly?
@@kylewalsh803 I run ours on max. Our car had 130000 miles when it broke so I figure if it last even 80000 before it breaks again no big deal. If we happen to have the car the hard part is already done.
Everything went well until I broke the locking clip for the seat harness, unfortunately now the airbag light is on
Can you still put the connector on even though the clip is broken?
@@737mechanic yes, at first the seat motor wasn’t working also but eventually I was able to get the seat to work again but the airbag light stayed on, put a scanner and gives me code B0014-0D and B0079-04
Just to see, I understood this correctly. The driver side has the actuator and the valve.
Yes
@@737mechanic awesome, thank you
737, Scan calibration question: Will a proper calibration help fix any errors that might have occurred from mounting the actuator out of sync with the temp dial? I have plenty of heat and cool down. I just cant say the AC is really as cold as I think it should be. Maybe calibrate the door to close off the heat farther? Also, ditto on the thank you's. I would not have taken this on without your video! See you over on Camaro5...
You need to do a calibration to make sure the doors are fully opening and closing. A scan tool is easiest and the best way to do this but if you disconnect the battery for a few min and reconnect it when you turn the key on the car should do a self calibrate.
@@737mechanic Yes, I disconnected the battery before I started the car for the first time after replacing the door. It works pretty well and it's possible I just need an air conditioning service but it was cold before the old door broke. So I guess bottom line is, should I pay somebody $150 to calibrate this thing?
@@HHHAAA111222 One thing you can do is on a hot day open the hood and see if the aluminum A/C line between the master cylinder and engine is nice and cold. That will help tell you if the system is indeed getting ice cold but simply not coming out cold from the vents.
Good idea. Thnaks for all your help. @@737mechanic
One last Q, 737. After a new (aluminum) door install and battery disconnect, I'm still getting a little warmer air on the pass side vs driver's side, did I screw something up? Seems to work thru the warm cycle. Plenty hot. Move to Alaska? 😂 Thx.
Great video man thanks for all the tips. I did have one question though is the door suppose to be in a certain position when installed depending on what setting you have the ac on?
If you turn your dial to cold the door will be pointing down.
Panel bond, A B S adhesive, or E-6000
Just got this done, thank you for the video! I had an issue come up after reconnecting everything and starting the car, the HVAC controls don't work properly, when pressing legs and face it comes out of the windshield vent and legs, not the face. There's also some weird popping noises coming from somewhere in the dash when set to face only and max fan speed. Any idea what I can do? The battery was disconnected the entire time, and I didn't reconnect it until everything was plugged back in.
Disconnecting the battery should cause the door actuators to recalibrate. You may have a bad mode control actuator.
@@737mechanic not sure what it was, got back under it this morning took BCM out, air duct out, reinstalled everything now its working like normal. Thanks again for the video!
@@rinzzlerrrr Maybe one of the BCM plugs wasn't seated all the way.
Thank you for your video it was a lot of help to do my 2012 Chevy camaro 45th anniversary 6.2 6 SPd manuel
Wire wheel and a gentle touch
OMG, trying to get that far end of the door into the boss has been a complete PITA!
Prolly won't get a response since videos a year old. Does it matter what position the door is vs what position the motor I in?
No, generally the actuator will only connect one way and be able to get the screws in and if you disconnect the battery it will do a self calibrate when you turn the key on.
@@737mechanic soon as I put this comment you talked about calibration 20 secs later..
im having trouble getting this piece off, i got the bottom to dislodge but its still not budging for me
Make sure you have cut deep enough in the two top corners and pry the bottom out and kinda bend it back and forth and it will slowly work loose.
nvm i got it, that top piece was a bear, for some reason. you made it look easy
This was a great video. It helped me replace my door. He did a great job!!!!
Can this be done on 2011 5.7 Jeep Grand Cherokee?
It probably can but you would have to figure out where the door is and how to cut it.
There was a year range of RAM 1500's that this was also done regularly.
Thank you@@737mechanic
Blend Door is the same as recirculation ? What is the part number ? 15-74128 ?
No different door. P/N is 92215212
Update...be very careful like he said on heat core when cutting.
I didn't peirce the heat core but a peice of plastic that was covering that side broke off. Now when I put it together my heat works yes, but now my coolant is leaking with it the vent and it's blowing smoke....now I have to figure a way to patch it up
You could use hi temp silicone gasket sealer and wait for some to dry and then go around the hole again until it’s sealed
Good job I have the same problem and that will save me a lot of money
Thank you. I have no money but have a camaro hahaha 😅 so I used the torch lighter to melt the blend door pieces Back together even stronger than before and ill tell you what it looks ugly but it works great 👍 atleast there's access now
What type of drill did you use to remove the seat?
I use my 3/8 impact.
Thank you so much man!! I followed this and it totally worked. You rock my world
Can you accidentally cut the heater core
If you are using the wrong tool you could. I use a hot knife so it would be very difficult to puncture the heater core.
any reason you cant use a dremal?
The main reasons I used the hot knife method is #1 it provides a very thin gap that requires very little to seal up.
#2 if you hit the evaporator with a hot knife you will not cut through it.
#3 it doesn't make a mess.
Thank u so much for this video. I just fixed it on my 2015 Camaro as well. Thank you for your detailed instructions.
Thank you very much for the knowledge Sir. Great video great tips and made it very easy to do it myself. 👍🏼 God Bless You always
Hello, great video. What is the name of the blue glue you used to put the cut back together? Thanks!!!
Turned a 8.5hr book time job down to 30 min thank man
How did you know where to plug up the connectors back into the body control module? I see they are all different colors but how did you know you weren't plugging the connector into the wrong spot
They are all idiot proof so even I can get them in correctly. Also the way they break out of the harness they kinda fall into their appropriate place.
They are labeled
You the man dude ! Thanks for the step by step
My 2015 SS with 45k broke blend door, new england weather 😢 enough, brittle cheap plasic. I am certain it will break again, i am definitely NOT removing dashboard. My mechanic, will do this. I will show him video
HELP!! can you get to the actuator from this position? How do I know if it’s the blend door or a actuator
Motor causing the problem?? Don’t want to go thru all this just to find out the door is fine and the motor is bad ..
At 9:40 I start taking the actuator out and talking about how to tell if the door is broken.
Hello if cold air coming out from one side and hot from the other does it mean the actuator is Brocken?
Not necessarily, the first thing you need to do is make sure it is fully serviced.
Just recently did this repair and while my air is still a bit cool compared to what it was, is it possible if you didn’t seal that plastic back up that the air that’s escaping could be coming in contact with the heater core resulting in it blowing warmer than it should? That’s literally the only thing I didn’t do and it started off fairly cool but today it felt warm again. The door seems to work cause I can tell the difference in temp otherwise.
Two things, first make sure it is fully charged, second, have someone do a door calibration to make sure it opens and closes all the way.
Gave a like and subscribe bc you probably just saved me $400 bucks
Great video, saved me so much money.
Holy crap!! This repair is a true p.i.t.a.!!You couldn’t pay me to do 8 of these terrible just terrible to put yourself through such pain. Thank you for the walk through but this is way more intense then I thought took me 4 hours and I’m no rookie or well atleast I wasn’t until this happened 😂
I kept saying I will never do another one but I have done 14 now and I have one to do in the next couple of weeks.
It has gotten easier but it still sucks.
Great video, thank you you save me a lot of money.
If your close to spring tx and taking work. I have camero that needs one done.
I am east of Dallas Tx.
QUESTION: am in the process of doing this repair and have hit a snag. The shaft on the actuator motor won’t align with any position that I can adjust the newly installed blend door. It's just slightly off but enough where I can’t even re-bolt the piece on. I’m thinking I can reset with a 9V battery, but can’t find the pin assignment to test. (GM Part # 92215208/ACDelco Part # 15-74128) Any advice would be appreciated. Thank you for your videos!
Great video but watching you cut towards your Thursday was killing me lol
would you be able to use a dremel to cut the piece out instead of a hot knife ?
The problem with using a dremel is the cut will be thicker than using a hot knife and the most important is if you even touch the evaporator or heater core you will grind through them. The purpose of using a hot knife is NOT being able to cut through either of those.
Dude I owe you some thanks.
Awesome thank you for the knowledge sir saved me a lot of time
What do you typically charge a customer for a job like this?
I have been charging 350.00.
That's a fair amount, where are you located?
@@lauradymondlvr I am in the Dallas area.
@@lauradymondlvr you?
@@jesusestrada8535 AZ , I wish I knew someone out here that does them.
Any tips on unclogging ac drain? Have water spitting out vents.
If it is clogged drain you can stick a flexible wire up into the drain tube. You will need to jack the car up so you can access the drain.
How can I get past the relearn stage ? I don’t have a scan tool to do last part plan on fixing my blend door this week.
You can disconnect the battery and reconnect it and when you turn the key on it will do a self learn.