How to Pin Foundation Footings to a Granite Ledge | This Old House
HTML-код
- Опубликовано: 9 сен 2024
- Charlie and Tom Silva start pinning the Cape Ann house footing to a granite ledge.
SUBSCRIBE to This Old House: bit.ly/Subscrib....
The ledge under the Cape Ann house addition is extensive. After several days of hammering, Charlie Silva has decided to pin the footings for the mudroom and garage to the rock. Tom Silva gives him a hand drilling rock for rebar and scribing the forms.
Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free.
bit.ly/3bnWadr
Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet:
bit.ly/34RYEP5
About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WETA Washington, DC.
Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldH...
Twitter: bit.ly/ThisOldH...
Pinterest: bit.ly/ThisOldH...
Instagram: bit.ly/ThisOldH...
How to Pin Foundation Footings to a Granite Ledge | This Old House
/ thisoldhouse
Your suppose to brush and blow the hole out before epoxy and rebar after you drill
Well you should have shown the whole foundation pour.
You must be new here :))
@@rpriesol dont you just hate ut when they do that though! never gets old
@@jomangeee9180 Yea, it is realy silly, but I believe they do it on purpose... Maybe youtube is their trial channel and then on their paid website they show always results :)
@@rpriesol yeah. they want you to pay for the episode on their website
@@rpriesol lmaooo
Look thru the window behind them @ 1:39 forward. Someone sweeping then breaks the broom over his knee. Strange. Was that on TV or real thing time?
Look closer. Wasn't sweeping, just moving lumber against the wall and broke a stick over his knee to make it smaller for the garbage pile - no broom head attached to either end.
Not a broom unfortunately lol
Hilarious!!!
I wish TOH would show the completed project. Very un-satisfying video!
Then don’t watch the videos.
This is part of a series. They build the whole house over the course of a season.
If u did the project urself then maybe u could c the completed job. Get working my dude!!
JOHN LEBZELTER one was expecting to see the job finished, that’s all.
because they want us to pay of it on their site.
Please clarify, below frost in bedrock. I completely agree with the epoxy detail. There is nothing about the evacuation of dust when you drilled the holes.
Jen and Charlie are my two favorites on TOH
It’s going to look good
Should hammer out the granite in steps for the elevation drop. You don't pour footings on a sloped surface, only level steps for elevation change.
Won't that Rebar embedded in the rock eventually rust out as it's possible for moisture to get inbetween the rock and the concrete?
All untreated rebar will rust in concrete eventually.
This is a major, known problem that has been over-looked for a century. Only in the last ten years have builders finally applied rust-inhibiting paint to rebar.
They make an epoxy coated rebar that should be used in the pinning process. Also you should wrap your metal strapping all the way around your footing
4:15 looks like a state job.....one guy working, and three guys watching.
I know these are just short clips from a full episode, but it would be nice if they took 30 seconds to give us an overview with a plot map or similar so we can get the visual of how this is laid out. I mean, it's a garage and I don't see a driveway. I also can't envision the driveway location given the slope on the 2 sides we can see.
"this bedrock is clearly in the wrong place"
Nope. That house is clearly in the wrong place.
Nope, The house is in the right place. The new garage is in the wrong place.
Drill and don't blast but use 'non-detonating cartridges' eg Autostem. You could also use expanding grout... Surprised these methods were not at least mentioned even if they don't suit this particular job...
Aaand it's winter
She says, “hammer me baby!”
What type of drill bit for the ledge drilling?
The hole really should have been blown out to remove the dust from the drilling....
I can tell you that the epoxy sets in the mixing chamber when it's more than 95 degrees outside.
Depends on the type. There are epoxies designed for applications in high temperature. But you’re right, especially if a quick-cure is used.
@@The13point1 It was an expensive lesson.
@ 1:55 guy touches hydraulic line is a big no no.
More like how to prep a footing. Didn't show anything
That footing is well done
Good to see Willy Nelson back in show biz. Didn’t know he could drive an excavator!
Operate *
they shoulda had Chuck Norris instead, he would have just moved the ledge for them.
What happened to all that granite?
1:41 Background man is not happy with the length of their stick
Someone should show the owners how to power wash the exterior of the home.
I was looking for this comment lol
👍🏻👍🏻
Escavator. Expresso.
👏🏻👏🏻👏🏻👏🏻👏🏻
1:40 look at the guy inside the house
#BOJACKSON
Nice snapping bats
That person looks like tom
It's his brother
It's his uncle.
it's his twin brother Tim
This guy could replace Kevin lol
Charlie is Tom Silva's brother.
@@yaosioHe is Tom Silvas nephew ;-)
Not really, but in few years he could do that with enough experience.... Kevin is great.
The epoxy seems like overkill; just drives up costs.
Resevwah.
They should have left that rock alone. All that for a garage? Is this for Mitt Romney?
Save the rocks!
Right? I would kill to own such a big beautiful stone.
Resi -voiahh.
They’re using the wrong type of concrete. They should be using the fiberglass infused concrete cause it’s so much stronger than using the rebar to strengthen ordinary concrete.