I think the issue is not in the interfaces, but in the producers ears and capabilities. The biggest impact ADDA conversion has is the first time (assuming sample rates and bit depth are consistent through each additional AD/DA conversion) and that's already REALLY small. The sample rate is going to constrain the audio in the first conversion, removing any frequencies above 1/2 of the sample rate (see Nyquist theorem.) With virtually all modern gear, those are going to be out of the range of human hearing. It's really not in the gear. The gear got better, not worse. It would be illogical to assume it's the gear.
@@akagerhard He specifically said "Cheaper microphones, cheaper interfaces".... yes it's the gear he's talking about. I upgraded from M-Audio FW410 to RME USB Babyface, the better word clock made a huge difference when EQ'ing in the box. I have an SM58 and AEA 44CE... Mackie preamps and Electrodyne preamps... etc etc
@@cylonvoiceguy The effect of the word clock is pretty much placebo, you won't be able to hear the difference between anything made in the last 30 years. If youre hearing a differnce from the M-audio it's gonna be in the cleaner gain you get with the babyface vs the noisier preamps of the m-audio
Completely agree with you regarding the increasing harshness. I mostly use these Oek plugins in the same way you’re describing. I think you’re right about the cheap mic, cheap interface thing, but it also comes down to cheap sounding samples, cheap sound synth VST or plastic sounding Kontakt kits etc. I also think a huge factor is so many people don’t create or record in ideal spaces, so tonal balances I get from clients for mixes are wayyyyyyy off. The productions are usually really cool but I end up spending a lot of time reworking the overall tonal imprint of a mix, and these plug-ins are amazing for that
this. Production is so so sos os os os osososssoossssssosooooooooooo fucking important thatn when done right makes the other two jobs (mix master) even easier but BETTER SOUNDNG. BRO WHEREEEEEEE can I get better sounding samples and sounds and what are better sounding virtual instrument's. I am trying to up my production. Is splice good? I herd they have a plethora of sounds on there and it high quality. And as for an interface, I got a cheap 99 pre sonus one thats old as hell. Any reccomendations for a high quality sounding one and mic?
@@cholkymilkmirage4984 it depends on the type of music you’re making, but Samples From Mars is a good place to start. I’d avoid Splice quite frankly - at this point it’s significantly oversaturated so it’s hard to find high quality sounds from reliable creators. The Arturia vintage synth collection and the Roland cloud synth collection are both very solid as VST synth collections. As are Diva and Trillian for bass. Pigments is also a very good VST synth. There are some really good live drum sample packs out there today as well, Jake Reed Music, Wave Tick drums, Shroom 020 … all recorded with high end gear and mics. For weirder more random types of samples you have to be more discerning and look more carefully, but they’re out there. Hope that helps, good luck!
@@cholkymilkmirage4984 for interface & mic: SSL2+ is the most slept on interface around. $299 bucks. Super cheap, with super solid preamps and conversion. For mic, the Aston Origin is probably the best cheap microphone around imo. Altho if you can afford an SM7b, which is only marginally more expensive, that would also be a great choice. The Sennheiser Mk4 is also pretty good, has a very forward and defined sound with a pronounced midrange though, so depends on if you like that kind of thing. If you can go higher with budget, TLM 102 is great, but then you’re entering the high end mic market, at which point you’d likely want a better preamp. All that said, if budget permits, I’d get the Heritage audio i73 … you can grab one for 1k USD and those pres are better than any other interface on the market, but the price reflects that. If you pair that with any of the 3 cheaper mics you will never really need anything better.
@@cholkymilkmirage4984AKG414 XLS is the reliable swiss army knife that works for everything. No harshess, it does have a very small boost around the limit of human hearing but i like it and a lot of people won't notice it, i can hear up to 19.4KHz.
Wow, what you described with harshness potentially as a result of stacked "okayness" is just what I've been experiencing while mixing. And that balance between letting a production sound open but keeping it from being too harsh has been so difficult when I run into this issue. Thanks for articulating what I've been dealing with! Might have to grab Bloom.
20 day full trial. Wish I hadn't. This thing is superb. I have €200 to find. You missed the mid/side or L/R button Wytse. You can use it separately, different settings on both m/s or l/r. Soooo good. Also 😁 just done a test on three songs in production applying a preset i made on one to the others and it really helps create a unified common sound on all tracks. 100% SOLD
@@-Deena.When? The moment i saw this release it was at full price and everyoone asked to get a sort of intro price. But even that is dxpensive though.
I was wondering this too. This has 4 bands that you can focus on individually but I think gulfoss can only focus on one thing at a time unless you open up another gulfoss
Video idea: You say this is a dynamic EQ. Do a video where you create similar sonic results between bloom and a dynamic EQ. Pro-Q 3, and Bloom, for instance. I'd love to see them side by side.
@@coryrogers846 The track is called "Light on Your Feet". Ryan plays most, if not all the instruments you hear on his songs. He's also a massively talented drummer and nice guy. I recommend you check out his music!
Yeah, I get lot of this kind of harshness You talk about in my productions. I think it's bad mic for my voice (rode nt1a, bad freq response for harsh polish language), boxiness of my recording environment (basically under the bed, some adaptation, but very poor), and my urge to saturate, overcompress and emulate analog chains in the box. Stacking a lot of plugins like Waves NLS/PA Amek or BX Console/Slate Neve Preamp emulation/Softube Tape/PA Black Box, Kazrog, PA Shadow Hills Mastering Compressor/Amek 200 EQ/PA SPL EQ. I cut with digital tools, I add with analog emulations. I think I do It a lot, and propably too much. Then I compensate with soothe or lindell deesser to cut all the harshness. I think especially doubling transformer - based emulations like black box+kazrog - it can mess 3k+ a lot. I tried to mix/master all digital, but it still seems to me that my recordings are harmonically lacking. I cannot afford analog tools, and I don't have a place for it. My recording interface are AXE I/O for guitar and Midas MR18 for vocal and acoustic guitar mics. Amp sims and captures from IK Multimedia Amplitube 5 and Tonex max. You can judge by Yourself - just listen to my rock or rap tracks on my channel.
Great video. Definitely related to the harshness +4k on my own productions and have been exploring what it could be. I record and mix my own tracks and suspect I'm not dealing with my high frequencies as accurately as I could. Potentially not supported by home studio monitoring too.
The ‘harshness’ you talk about at 7:55 sounds a lot like it might be the build up of aliasing. I’ve completely given up using plugins that introduce any harmonics (even those that do enormous amounts of oversampling) and, lo and behold, all the harshness’s I used to hear has disappeared. However before I did that I used to use Soothe to mitigate the digital harshness.
We're making a vid on this right now. LOVED it for M/S stuff on mix bus and synths and such. But we heard some serious artifacts on some sharp vocals. Did you guys hear this too? Or do our vocals just suck lol
I've noticed that a lot of "prosumer" interfaces produce thin vocals. I think that certain interface brands produce more natural sounding vocals. Lots of remedies have to be applied to fix the thin sounding vocals. As a matter of fact I have even heard that noticeably "thin" vocal sound from famous engineers who have the budget to afford whatever gear they want. They fell for the same marketing as the rest of us. Everything else in their mixes sounds great except the vocals. I think this one distinction is keeping the wannabes struggling to catch up with the big houses. There are actually some affordable interfaces that don't have these issues. There are also more expensive gear that render thin vocals. But I think the vocal sound of an interface might be a good place to check first in order to find out if you will be merely stacking harsh okayness and using various tricks to compensate for vocal thinness with the low quality converters. Start with finding out which companies write their own drivers. Many are outsourcing this process and can't afford to optimize the chip sets because they aren't handling this in house. This also leads to compatibility nightmares. Hint: the famous company who is writing their own drivers is based in Germany. Their interfaces keep working forever and don't lose compatibility.
i think a lot of harsh stuff and just high end issues ive had to deal with is things like bleed in different mics, or stuff that has been boosted as a result of eqing a mic particularly with drums, which in itself can be a mic issue because different mics color the off axis sound differently, its weird theres a lot of causes i feel for unwanted harshness and just clutter in a mix, whether it be the wrong choice of mic for source material (or i guess as you mentioned preamps though i havent looked into that enough), or just processing something way too much, ive found that theres an unhealthy habit of putting too much on a sound nowadays, less it more at times (i guess unless youre sound designing or something)
I didn't know that the AKG 414 XLS is so much better than the XL2 version. The XL2 has issues with the 2KHz-10KHz region, 6KHz in particular has a boost of 5 dB and i hate 6KHz. I think bleeding by itself isn't the main problem, bleeding can't be avoided only reduced. Harshess is produced by aliasing, aliasing ruins clarity for anything above 14KHz, there are a lot of mixing tutorials on youtube with waves plugins and they have significant aliasing problems (they can't handle any sampling rate).
Yeah I also encounter those "restless highs" and from my experience, after asking what setup they used and so on, it pretty much almost always boils down to them having purchased a bundle of gear where there is a discount and surprisingly often I find the Rode NT1A to be the common factor in all those recordings, at least for vocals. For OHs it seems km184 are the new standard, but the newer production line also seems to like to produce some resonant frequencies, I don't know what's up with that. But that are my 2 cents :)
After testing it’s pretty similar. IMO bloom has a better UI. I’m not sure if the algorithm is more heavy handed in Equalizer but I seem to get slightly better/more transparent results out of bloom. They’re close though and as an Equalizer owner I probably won’t be paying the 200 bucks to keep bloom, even though I regularly use oeksound’s other stuff. Also, bloom isn’t really “multi band,” you actually have a bit more tone shaping control in Equalizer. It’s just how the interface is laid out.
Soothe is a brilliant plugin, I bought it when it was discounted. I wish their plugins would be a bit more affordable though, 199 € is a lot of money for a plugin...
It did not work well on tracks with heavy low end beats and bass, but I do not think it was meant for that, anyway...Thanks for all the work you do bud - cheers from Canada
Good test, but wouldn't it also be interesting to take a track where you have deliberately cut or limited frequencies throughout or on individual tracks? To see whether you can get close to an original mix and whether a dynamic EQ achieves similar, worse or better results. And to discuss the pros and cons!
CAN YOU PLEASE MAKE A VIDEO ABOUT „THE_STRIP“ PLUGIN FROM PHIL SPEISER? Sorry for screaming, it‘s an AI ASSISTANCE mixing plugin, I‘d really love to hear your opinion❤️
Could you use Soothe2, Spiff and Bloom to do the same thing on the same track to see what the differences are? I own Soothe2, but can't get my head around why I would want Bloom or Spiff
I allways had problems with restless highs. If i turn hem down, my music sounded dusty. I had to work years to enhance this problem. I do this in the master chain of the mix. And still now days im not at that point.
I relatively new to taking on clients for engineering. Self taught, but I strive for excellence and not cutting corners. So far I’ve been nothing but frustrated with the quality recordings from my clients. You mentioned the common harshness above 4k. I recently had a client who recorded a whole psychedelic soul record in a random room with 120+ tracks. The amount of harshness is unbelievable and I took on the project just to see how far my current knowledge can take me. My client is happy but I secretly hate the finished product lol. I think that in a world where recording is so accessible, and the standard for quality recording has diminished, this tool could aid the engineer that is striving to achieve excellence results. Can someone answer me, where do you draw the line with the quality of recording you can take on?
Atleast to me, if anything, the problem is muddiness in today’s world. Bad rooms bad sound selections etc… harshness is so much easier to fix in my opinion. But bloom Is amazing at muddiness too.
For me, the key word in OEK Sounds description of what Bloom does is make the output sound NATURAL. I've tried the demo on vocals and acoustic guitar recordings, which I really struggle with to tame certain frequencies and still get them to sound 'natural', Natural, to me, usually means realistic and sounding relaxed / not stressed due to over compression or certain frequencies being over emphasised (too much ok-ness) or dimmed. Bloom worked beautifully in my test cases. Particularly as the source materials were not perfect to start with. I highly recommend trying the Bloom demo.
Basically it's Gullfoss with a slightly different target EQ. That and 4 band EQ build in and some compression when the dial goes beyond 7. There is no need to get this if you already own gullfoss. The two different plugins have been tested and similar results can be had.
@@gravgrav5335 Totally agree with what you wrote. You can put an EQ-curve before Gullfoss to make it sound like Bloom. They are in fact very similar. I don't use either in the end product. Gullfoss or Bloom are used to create a reference track, then I will recreate the EQ curve using the REFERENCE plugin. That way you get a great sounding track without artefacts. That actually sounds much better. (Bloom sounds harsh, probably aliasing).
I agree with this, I use almost exclusively vsts, except for vocals and I spent a LOT of time eqing harsh frequencies. For people like me this could be such a time saver paired with soothe
On paper yes, but in practice its nothing like Gulfoss. You have much more control over the sonic character - it can work on tracks, groups and the mixbus, and in my opinion it sounds way more natural and refined than Gullfoss. Gulfoss is also quite good, but I would pick Bloom every time over the other.
@@maailmanalkuHave you ever tried Voxengo TEOTE or Soniformer? From what I can tell, soniformer seems like a manual version of these auto-EQ's. I've been demoing soniformer recently and the work flow manages to be quick, specific, AND complex all at the same time. Am I missing something about why it's not more universally praised or at least mentioned? I'm curious how you think it compares to the more expensive and well-known options.
i think digital interfaces sound less harsh now than ever i think what has changed is your ability to hear the build up in the high end. as my ears have developed over the years i have noticed the same thing.. i mainly mix live sound and my ears are so much more sensitive to whats going on up high now than say 10 years ago..
Ohhh ya, I've noticed the same things! I'm a freelancer so I work with a lot of "home studio" musicians and MANY projects I get to work on the recordings are sub par.
To be honest, i thought it made everything sound like it was made from plastic. Might be great on certain toy sound genres. Or maybe my ears are different from other peoples, I tend to dislike what gulfoss does as well most of the time.
Agreed… but only if you use it on everything. A bit here and there where you actually have a problem and it’s amazing… but if you plaster it over every track you end up with a weird synthetic sound where nothing sounds interesting.
Helpful, it seems to be an true Automatic Gain Control. Gain riding with near infinite frequency control. IMO, overuse would over homogenize the resulting mix, great for background music tracks. The only negative is the pastel background color. I find it VERY hard to read.
The most similar ones are gulfoss and equalizer curious that both are ones you didn't like. About the harshness teme I feel the same and for me Cames also from the pollution of ac current and electromagnetic fields arround us. Maybe a some sort of lower octave distortion and also that the quality of vocal booths and home studio acoustics is getting worse because more people's are investing in having one instead of going in a professional studio.
Bloom on the master bus definitely loses sub bass definition. I'm not convinced by it tbh. It tends to blur everything. I am going to stick to simple EQ and multiband compression.
Watched the 2 videos on the OekSound site and played around with Bloom for about the last hour or so. The engineering on this plug-in is incredible really, and the care they put into it. This is a plug-in i'd definitely put into my repertoire. Just not for 200, maybe during a good sale sometime. Oh and the guy from the videos looks like a 21st century version of Ivar The Boneless from that Vikings show.
Tectonic from Aberrant DSP has already done something very similar and much cheaper. The Oeksound bloom controls are easier to understand, the rest seems very the same to me
I think the harshness is like you said- It's a build up of OK-ness. The same thing happens in the analog realm, right? Subtle harmonics from the circuitry at each step of the process add up to something noticeable at the end.
Nice to hear Sandstorm finally run through Bloom.
more like a sand breeze than a storm now
Lucky u two, mine had no sand in it
My neigbor has an RV camper that says “Sandstorm” across it in huge letters. It makes me laugh & think of this channel every time I see it
I love Sandstorm and it sounded especially good through Bloom....good work....
my gosh, this made me lol irl
"... stacking all the "OK-ness" on top of each other".... brilliant explanation of why some thing sound the way they do!
I think the issue is not in the interfaces, but in the producers ears and capabilities. The biggest impact ADDA conversion has is the first time (assuming sample rates and bit depth are consistent through each additional AD/DA conversion) and that's already REALLY small. The sample rate is going to constrain the audio in the first conversion, removing any frequencies above 1/2 of the sample rate (see Nyquist theorem.) With virtually all modern gear, those are going to be out of the range of human hearing.
It's really not in the gear. The gear got better, not worse. It would be illogical to assume it's the gear.
@@akagerhard He specifically said "Cheaper microphones, cheaper interfaces".... yes it's the gear he's talking about. I upgraded from M-Audio FW410 to RME USB Babyface, the better word clock made a huge difference when EQ'ing in the box. I have an SM58 and AEA 44CE... Mackie preamps and Electrodyne preamps... etc etc
@@cylonvoiceguy The effect of the word clock is pretty much placebo, you won't be able to hear the difference between anything made in the last 30 years. If youre hearing a differnce from the M-audio it's gonna be in the cleaner gain you get with the babyface vs the noisier preamps of the m-audio
Completely agree with you regarding the increasing harshness. I mostly use these Oek plugins in the same way you’re describing. I think you’re right about the cheap mic, cheap interface thing, but it also comes down to cheap sounding samples, cheap sound synth VST or plastic sounding Kontakt kits etc. I also think a huge factor is so many people don’t create or record in ideal spaces, so tonal balances I get from clients for mixes are wayyyyyyy off. The productions are usually really cool but I end up spending a lot of time reworking the overall tonal imprint of a mix, and these plug-ins are amazing for that
this. Production is so so sos os os os osososssoossssssosooooooooooo fucking important thatn when done right makes the other two jobs (mix master) even easier but BETTER SOUNDNG.
BRO WHEREEEEEEE can I get better sounding samples and sounds and what are better sounding virtual instrument's. I am trying to up my production. Is splice good? I herd they have a plethora of sounds on there and it high quality. And as for an interface, I got a cheap 99 pre sonus one thats old as hell. Any reccomendations for a high quality sounding one and mic?
@@cholkymilkmirage4984 it depends on the type of music you’re making, but Samples From Mars is a good place to start. I’d avoid Splice quite frankly - at this point it’s significantly oversaturated so it’s hard to find high quality sounds from reliable creators. The Arturia vintage synth collection and the Roland cloud synth collection are both very solid as VST synth collections. As are Diva and Trillian for bass. Pigments is also a very good VST synth. There are some really good live drum sample packs out there today as well, Jake Reed Music, Wave Tick drums, Shroom 020 … all recorded with high end gear and mics. For weirder more random types of samples you have to be more discerning and look more carefully, but they’re out there. Hope that helps, good luck!
@@cholkymilkmirage4984 for interface & mic: SSL2+ is the most slept on interface around. $299 bucks. Super cheap, with super solid preamps and conversion. For mic, the Aston Origin is probably the best cheap microphone around imo. Altho if you can afford an SM7b, which is only marginally more expensive, that would also be a great choice. The Sennheiser Mk4 is also pretty good, has a very forward and defined sound with a pronounced midrange though, so depends on if you like that kind of thing. If you can go higher with budget, TLM 102 is great, but then you’re entering the high end mic market, at which point you’d likely want a better preamp. All that said, if budget permits, I’d get the Heritage audio i73 … you can grab one for 1k USD and those pres are better than any other interface on the market, but the price reflects that. If you pair that with any of the 3 cheaper mics you will never really need anything better.
@@cholkymilkmirage4984AKG414 XLS is the reliable swiss army knife that works for everything. No harshess, it does have a very small boost around the limit of human hearing but i like it and a lot of people won't notice it, i can hear up to 19.4KHz.
It's always so much fun watching you work, dude. What an enjoyable, fresh perspective you always deliver. I'll continue to support!! Much love.
The kick in this track is so fucking nice. RIGHT up my street jesus christ.
💯
Exactly the first thing I noticed. It sound so perfect.
It's pink ! I love it ! Great show !
Wow, what you described with harshness potentially as a result of stacked "okayness" is just what I've been experiencing while mixing. And that balance between letting a production sound open but keeping it from being too harsh has been so difficult when I run into this issue. Thanks for articulating what I've been dealing with! Might have to grab Bloom.
Those drums are smackin... I love that tone and kit...
Your knowledge and personality is a gem - stay you.
"Stacking 'OK ness".. love it. my new saying. gonna try it at work. "You guys are not shining here because you're just stacking OK ness"
20 day full trial. Wish I hadn't. This thing is superb. I have €200 to find. You missed the mid/side or L/R button Wytse. You can use it separately, different settings on both m/s or l/r. Soooo good. Also 😁 just done a test on three songs in production applying a preset i made on one to the others and it really helps create a unified common sound on all tracks. 100% SOLD
They should have done an intro offering as everyone else does it..
@@KYTHERAOfficial It's was at €169 intro.
@@-Deena.When? The moment i saw this release it was at full price and everyoone asked to get a sort of intro price. But even that is dxpensive though.
@@DJayFreeDoo It is still now £169 Go look. 🧡
@@DJayFreeDoo £.169, apols, not €. It's still £169.
It’s something like gulfoss, isn’t it?
Been on the fence if I should buy this or not... I think the price is too high
Cheaper one week now!
You missed the sale this year
@ nope I got it a couple of weeks ago ;)
Would this be comparable to something like Gullfoss?
I was wondering this too. This has 4 bands that you can focus on individually but I think gulfoss can only focus on one thing at a time unless you open up another gulfoss
Awesome video, thanks. WHERE CAN I GET THAT T-SHIRT you're wearing? I love it.
Video idea: You say this is a dynamic EQ. Do a video where you create similar sonic results between bloom and a dynamic EQ. Pro-Q 3, and Bloom, for instance. I'd love to see them side by side.
It really isn't just a multi-band dynamic EQ though...seriously, its not.
@@-Deena.I agree. Tho, I'd still love to see a plugin comparison. He can illustrate how bloom is similar and different from a dynamic EQ.
Very cool to hear a Ryan James Carr track!
@@coryrogers846 The track is called "Light on Your Feet". Ryan plays most, if not all the instruments you hear on his songs. He's also a massively talented drummer and nice guy. I recommend you check out his music!
Yeah, I get lot of this kind of harshness You talk about in my productions. I think it's bad mic for my voice (rode nt1a, bad freq response for harsh polish language), boxiness of my recording environment (basically under the bed, some adaptation, but very poor), and my urge to saturate, overcompress and emulate analog chains in the box. Stacking a lot of plugins like Waves NLS/PA Amek or BX Console/Slate Neve Preamp emulation/Softube Tape/PA Black Box, Kazrog, PA Shadow Hills Mastering Compressor/Amek 200 EQ/PA SPL EQ. I cut with digital tools, I add with analog emulations. I think I do It a lot, and propably too much. Then I compensate with soothe or lindell deesser to cut all the harshness. I think especially doubling transformer - based emulations like black box+kazrog - it can mess 3k+ a lot.
I tried to mix/master all digital, but it still seems to me that my recordings are harmonically lacking. I cannot afford analog tools, and I don't have a place for it. My recording interface are AXE I/O for guitar and Midas MR18 for vocal and acoustic guitar mics. Amp sims and captures from IK Multimedia Amplitube 5 and Tonex max. You can judge by Yourself - just listen to my rock or rap tracks on my channel.
I just took a listen to your tracks. Very smooth-sounding. Clear and smooth...
I dunno when I hear that high end sparkle I’m thinking buy it. I’ll have to try the demo when I’m ready
have you updated your catalog of songs you have mixed lately?
Where would you place it in your vox chain?
Great video. Definitely related to the harshness +4k on my own productions and have been exploring what it could be. I record and mix my own tracks and suspect I'm not dealing with my high frequencies as accurately as I could. Potentially not supported by home studio monitoring too.
Isn´t it the same like soothe only with multi bands instead of the eq band setup?
What's that tune???!!!! Soooo cool!!!!!!
where to buy your tshirt?
So it’s a dynamic EQ with a preset limiter?
It’s also multiband compression and saturation all combined-hence why they call it a tone shaper
New sub man, every video you do is so helpful
Wytse seems to show, which audio companies have t-shirts with their logo.
The ‘harshness’ you talk about at 7:55 sounds a lot like it might be the build up of aliasing. I’ve completely given up using plugins that introduce any harmonics (even those that do enormous amounts of oversampling) and, lo and behold, all the harshness’s I used to hear has disappeared. However before I did that I used to use Soothe to mitigate the digital harshness.
What's the difference bw this and soonible smart eq ?? For me they''re basically the same thing
So it's like a dynamic EQ but with "adaptativa" bands?
If you find over time that this is genuinely adding something beyond more familiar tools, I'd love to hear about it.
yeah, sounds good. I'll more than likely try it out on my next batch
Damn, i was sure i don't want it but now i sort of do
thanks
We're making a vid on this right now. LOVED it for M/S stuff on mix bus and synths and such. But we heard some serious artifacts on some sharp vocals. Did you guys hear this too? Or do our vocals just suck lol
this sandstorm feelish damn smooth, eerh i mean blooom
I've noticed that a lot of "prosumer" interfaces produce thin vocals. I think that certain interface brands produce more natural sounding vocals. Lots of remedies have to be applied to fix the thin sounding vocals. As a matter of fact I have even heard that noticeably "thin" vocal sound from famous engineers who have the budget to afford whatever gear they want. They fell for the same marketing as the rest of us. Everything else in their mixes sounds great except the vocals. I think this one distinction is keeping the wannabes struggling to catch up with the big houses. There are actually some affordable interfaces that don't have these issues. There are also more expensive gear that render thin vocals. But I think the vocal sound of an interface might be a good place to check first in order to find out if you will be merely stacking harsh okayness and using various tricks to compensate for vocal thinness with the low quality converters. Start with finding out which companies write their own drivers. Many are outsourcing this process and can't afford to optimize the chip sets because they aren't handling this in house. This also leads to compatibility nightmares. Hint: the famous company who is writing their own drivers is based in Germany. Their interfaces keep working forever and don't lose compatibility.
Finally. I think this thing does a really good job with muddy sounds also.
so does soothe
Yes, just like ten other plugins on the market for a fraction of the price.
i think a lot of harsh stuff and just high end issues ive had to deal with is things like bleed in different mics, or stuff that has been boosted as a result of eqing a mic particularly with drums, which in itself can be a mic issue because different mics color the off axis sound differently, its weird theres a lot of causes i feel for unwanted harshness and just clutter in a mix, whether it be the wrong choice of mic for source material (or i guess as you mentioned preamps though i havent looked into that enough), or just processing something way too much, ive found that theres an unhealthy habit of putting too much on a sound nowadays, less it more at times (i guess unless youre sound designing or something)
I didn't know that the AKG 414 XLS is so much better than the XL2 version. The XL2 has issues with the 2KHz-10KHz region, 6KHz in particular has a boost of 5 dB and i hate 6KHz. I think bleeding by itself isn't the main problem, bleeding can't be avoided only reduced.
Harshess is produced by aliasing, aliasing ruins clarity for anything above 14KHz, there are a lot of mixing tutorials on youtube with waves plugins and they have significant aliasing problems (they can't handle any sampling rate).
After every review I was just waiting to hear yours bc i value it more
Yeah I also encounter those "restless highs" and from my experience, after asking what setup they used and so on, it pretty much almost always boils down to them having purchased a bundle of gear where there is a discount and surprisingly often I find the Rode NT1A to be the common factor in all those recordings, at least for vocals.
For OHs it seems km184 are the new standard, but the newer production line also seems to like to produce some resonant frequencies, I don't know what's up with that. But that are my 2 cents :)
I keep wondering if it’s a multi-band version of Wavesfactory Equalizer.
After testing it’s pretty similar. IMO bloom has a better UI. I’m not sure if the algorithm is more heavy handed in Equalizer but I seem to get slightly better/more transparent results out of bloom. They’re close though and as an Equalizer owner I probably won’t be paying the 200 bucks to keep bloom, even though I regularly use oeksound’s other stuff. Also, bloom isn’t really “multi band,” you actually have a bit more tone shaping control in Equalizer. It’s just how the interface is laid out.
My thoughts (without testing) is that Bloom is very similar to Soothe 2, not worthing the purchase If you own Soothe 2. I'm I tripping?
Basically it's an adaptive EQ..
8:30 100% have you noticed on dialogue tracks the are thick ssssss that have to be fought to softened
Yet another WhiteSeaStudio video demonstrating the versatility of Sandstorm. Darude is GOATED
I'm at 5:00. Will be fun to see what you think in the end. I think it's brilliant at this stage.
Soothe is a brilliant plugin, I bought it when it was discounted. I wish their plugins would be a bit more affordable though, 199 € is a lot of money for a plugin...
It did not work well on tracks with heavy low end beats and bass, but I do not think it was meant for that, anyway...Thanks for all the work you do bud - cheers from Canada
Thanks for the great video mate. Do those black dots by the frequency allow you to select the frequency, or are the frequencies fixed?
Looked like the 4 sliders also move left and right to lower or raise the center frequency of that section's bandwidth..
Frequencies are not fixed and you can do mid and side different frequencies
did you watch the video
@@whatskraken3886 yes, he did let notice so I was pointing it out politely. Thanks for stopping by though.
I would also .. Loooooove to figure that out, man ... Gvd.
Please let us know!
Good test, but wouldn't it also be interesting to take a track where you have deliberately cut or limited frequencies throughout or on individual tracks? To see whether you can get close to an original mix and whether a dynamic EQ achieves similar, worse or better results. And to discuss the pros and cons!
This plugin does wonders with acoustic guitars!!
Given the prices I paid for things like Reason, Arturia V-Collection or TDR Plugin Collection, those prices for a single effect are much too high.
Harshness (perhaps) = Zeitgeist?... was my first spontaneous thought. Get my drift?
Heh, great resonance compensator without any bus there, nice
CAN YOU PLEASE MAKE A VIDEO ABOUT „THE_STRIP“ PLUGIN FROM PHIL SPEISER? Sorry for screaming, it‘s an AI ASSISTANCE mixing plugin, I‘d really love to hear your opinion❤️
i think its kinda like the plugin "Sugar"
Could you use Soothe2, Spiff and Bloom to do the same thing on the same track to see what the differences are? I own Soothe2, but can't get my head around why I would want Bloom or Spiff
Soothe2 and Bloom might be similar as both based on principles of dynamic EQ, but Spiff different as it focuses on transients
Soothe is substractive only for example
I allways had problems with restless highs. If i turn hem down, my music sounded dusty. I had to work years to enhance this problem. I do this in the master chain of the mix. And still now days im not at that point.
Wonder how much it really adds compared to TEOTE and Gullfoss. Yes you have more control over the curve but for 200? IDk
i was wrong it's really good and sounds better than those 2
multiband gulfoss eq,
also, the harshness u mention at 8.00,
you know the source, it 's OTT
I relatively new to taking on clients for engineering. Self taught, but I strive for excellence and not cutting corners. So far I’ve been nothing but frustrated with the quality recordings from my clients.
You mentioned the common harshness above 4k. I recently had a client who recorded a whole psychedelic soul record in a random room with 120+ tracks. The amount of harshness is unbelievable and I took on the project just to see how far my current knowledge can take me. My client is happy but I secretly hate the finished product lol.
I think that in a world where recording is so accessible, and the standard for quality recording has diminished, this tool could aid the engineer that is striving to achieve excellence results.
Can someone answer me, where do you draw the line with the quality of recording you can take on?
At the number of zeros in the down payment check (also, always assume the down payment is the only payment).
I personally dont like soothe. I think using the right comp and eqing into it and after it can yield even better results in correcting the ok-ness
I think the increased harshness in more recent productions is probably from many producers not gain staging.
Atleast to me, if anything, the problem is muddiness in today’s world. Bad rooms bad sound selections etc… harshness is so much easier to fix in my opinion. But bloom Is amazing at muddiness too.
Would love to see you play with Spectral Compressor by Robbert van der Helm
I think the increased harshness is actually a change in taste combined with the earbud generation having destroyed ears with the top-end missing.
Having some guitar signal harshness lately but might be a mixing/fader issue, but seeing this gives me hope for correction for a lazy session.
For me, the key word in OEK Sounds description of what Bloom does is make the output sound NATURAL.
I've tried the demo on vocals and acoustic guitar recordings, which I really struggle with to tame certain frequencies and still get them to sound 'natural', Natural, to me, usually means realistic and sounding relaxed / not stressed due to over compression or certain frequencies being over emphasised (too much ok-ness) or dimmed.
Bloom worked beautifully in my test cases. Particularly as the source materials were not perfect to start with.
I highly recommend trying the Bloom demo.
When r u making a video withthe actual darude btw?
I have it on trial and consitently getter better result with smart:eq4 in adaptive mode.
Does that have a squash mode?
Similar to voxengo teote, except multiband. But sounds close.
Yes and no. Technically they are very different at least.
Basically it's Gullfoss with a slightly different target EQ. That and 4 band EQ build in and some compression when the dial goes beyond 7. There is no need to get this if you already own gullfoss. The two different plugins have been tested and similar results can be had.
@@gravgrav5335 Totally agree with what you wrote. You can put an EQ-curve before Gullfoss to make it sound like Bloom. They are in fact very similar. I don't use either in the end product. Gullfoss or Bloom are used to create a reference track, then I will recreate the EQ curve using the REFERENCE plugin. That way you get a great sounding track without artefacts. That actually sounds much better. (Bloom sounds harsh, probably aliasing).
the harshens comes form vst synthesisers, because there is no natural high freq rollout and all osc are in phase it will build up in high frequencies
also ott and and digital distrorion whith antialiasing will create this high freq build up
I agree with this, I use almost exclusively vsts, except for vocals and I spent a LOT of time eqing harsh frequencies.
For people like me this could be such a time saver paired with soothe
where could you put this, on an entire mix or individual tracks as well?
I’m preferring it on individual tracks or busses for sure. Master bus would be much gentler application
@@kevinkearney3836 Nice, I can see this clearing up one of my DI guitars a little more and possibly bring a freshness to the vocals
Seems similar to Soundtheory Gullfoss but with more options.
On paper yes, but in practice its nothing like Gulfoss. You have much more control over the sonic character - it can work on tracks, groups and the mixbus, and in my opinion it sounds way more natural and refined than Gullfoss. Gulfoss is also quite good, but I would pick Bloom every time over the other.
Long time Gulfoss user here, hurts to say it a bit but this plugin simply just sounds better to me, like in every way, your mileage my vary
@@maailmanalkuHave you ever tried Voxengo TEOTE or Soniformer? From what I can tell, soniformer seems like a manual version of these auto-EQ's. I've been demoing soniformer recently and the work flow manages to be quick, specific, AND complex all at the same time. Am I missing something about why it's not more universally praised or at least mentioned? I'm curious how you think it compares to the more expensive and well-known options.
It would be cool if you could solo each band to hear what it's doing.
Think I'll stick with TDR Nova and save a few pennies. They (Oeksound) do pretty GUI.
Reminds me of the Stabilyzer in Ozone :)
another GUllfoss with EQ added?
i think digital interfaces sound less harsh now than ever i think what has changed is your ability to hear the build up in the high end. as my ears have developed over the years i have noticed the same thing.. i mainly mix live sound and my ears are so much more sensitive to whats going on up high now than say 10 years ago..
Thanks for a video
Killer plug-in
with smarl changes that could be easy a nice lo-fi track
We are incrementally handing over our creativity to algos.
Is that Adam Deitch on drums? Kill'n!
Ohhh ya, I've noticed the same things! I'm a freelancer so I work with a lot of "home studio" musicians and MANY projects I get to work on the recordings are sub par.
I use all uad plugins
I use gulfoss to unmask dialogue without sounding EQd or processed… bloom can get similar results but gulfoss is still better!
Gulfoss doesn’t give the mid side or smash or as much control, I’ve A/B’d them a lot and both have their uses
its a mulitband Gullfoss
Reminds me a lot of Process Audio's Sugar plugin
Was thinking the same. Got both and lately I’m obsessed turning them on and off on masterbus trying to find if I can hear differences.
Thanks! They have a sale right now. Gonna try it first of course.
To be honest, i thought it made everything sound like it was made from plastic. Might be great on certain toy sound genres. Or maybe my ears are different from other peoples, I tend to dislike what gulfoss does as well most of the time.
Agreed… but only if you use it on everything. A bit here and there where you actually have a problem and it’s amazing… but if you plaster it over every track you end up with a weird synthetic sound where nothing sounds interesting.
Wise words, I probably tested it in a too generic fashion. @@almckechnie
Helpful, it seems to be an true Automatic Gain Control. Gain riding with near infinite frequency control. IMO, overuse would over homogenize the resulting mix, great for background music tracks. The only negative is the pastel background color. I find it VERY hard to read.
The most similar ones are gulfoss and equalizer curious that both are ones you didn't like. About the harshness teme I feel the same and for me Cames also from the pollution of ac current and electromagnetic fields arround us. Maybe a some sort of lower octave distortion and also that the quality of vocal booths and home studio acoustics is getting worse because more people's are investing in having one instead of going in a professional studio.
Is this the pink interface for OTT?
Bloom on the master bus definitely loses sub bass definition. I'm not convinced by it tbh. It tends to blur everything. I am going to stick to simple EQ and multiband compression.
Watched the 2 videos on the OekSound site and played around with Bloom for about the last hour or so. The engineering on this plug-in is incredible really, and the care they put into it. This is a plug-in i'd definitely put into my repertoire. Just not for 200, maybe during a good sale sometime. Oh and the guy from the videos looks like a 21st century version of Ivar The Boneless from that Vikings show.
Tectonic from Aberrant DSP has already done something very similar and much cheaper. The Oeksound bloom controls are easier to understand, the rest seems very the same to me
I think the harshness is like you said- It's a build up of OK-ness. The same thing happens in the analog realm, right? Subtle harmonics from the circuitry at each step of the process add up to something noticeable at the end.