LOCKTITE in a SURRON VIDEO!!! My lanta you are the VERY FIRST out of alllllll the youtube videos on surrons.....99.9% of the smucks are wrenching in thier moms kitchen with $8 worth of tools. As a 20yr long bike tech its PAINFUL to watch surron builds....you do things rather well my friend. Good on you. Cheers.
If you still got the little cable thing with a led on that come with the bike you can use it to disable the break sensor. You plug it in between the controller and the battery and turn on the bike it will blink then to turn the ebrake sensor off you do 8 short press and 1 long on the front break it will then do 8 blinks to confirm it is disabled. You can turn the ebrake sensor back on doing 9 short and 1long (9 blinks will confirm it). It can be used as well to change the level or the regen braking or disable it. Level one regen braking = 2 short 1 long (2 blinks), level two regen braking = 3 short 1 long (3 blinks), level three regen braking = 4 short 1 long (4 blinks), NO Regen = 7 short one long (7 blinks).
Got mine in October, it’s a 2022, and it also doesn’t have the brake sensors engaged. Thought I was going crazy at first, but glad I’m not the only one! 😂🤙🏻
@origamimaster999 the Tilt sensor is a balance sensor that shuts the bike off if you crash or lean the bike too far over. It is a safety feature that usually causes more issues then anything. If your planning on any rough riding you will usually have to remove the tilt sensor
Surron randomly powered off while riding, I just finished removing the tip over & kick stand sensor but still not getting any power 🥲 I’m gussing my controller is just shorted out
No issues after removing the kickstand sensor? I just got a lowering bracket and pegs, spacer, the works, but I’m noticing my new kickstand is gonna require the removal of the sensor.
If I just cut the kickstand wire, should the bike work if that was really the issue? Or do I need to actually unplug it to see if that was the problem?
Cutting the wire would do the same thing as unplugging it, i just didn't want random dangly wires everywhere! Make sure you cap the ends off of the wires, so they can't touch!
my 2023 has got break sensors turned off, only kickstand is on but I have no problem with that (no need to cut green wire because speed is unlocked also)
Picked up a brand new surron 2024 light bee x a few days ago. All was fine until i was playing with my kid in the garden and hitting his MTB hopper jumps. Soon as i land off the jump the bike cuts out and i have to switch it off and back on again. Any idea why this is? Thanks
@oscarmayer3000 I did the front brake thing and disabled the engage, the brake sensor and then did same with the kick start and bike works perfectly now 👌
@@davidf0711how exactly did you do it? I have a surron that will cut out randomly after deleting all the sensors, do I have to do the disable thing after to make it work without cutting out?
@christianhansen909 hi mate, this guy explains most of it. (Link below). There's also a chart online with all the different things you can do and I have it saved to my phone but RUclips doesn't let me upload images. Search Google for surron override codes via brake lever and you should be able to find it. I have everything disabled on mine now so it never cuts out. ruclips.net/video/3UzXmrdZA5c/видео.htmlsi=trDWLpeXspgiMJ5X
Good video do you recall if the tilt sensor would make a rattle noise when you shake it? My bike acts like it’s over heating or like I’m almost dropping it and it shuts off and only goes for a second before stoping again hope that fixes it👌
@@KGRowlo yea I took them out and gave it a good rip and looks like it’s the battery or controller! Speed dash/display turns on and throttle moves for split second but no display on the battery or front light witch is wired😂sounds like battery now
I slammed hard for the first time with only 500 miles on the bike and broke my right footpeg mount. ( i was doing wheelies knowing i needed to bleed my rear brake, but i learned a good lesson) After i assessed the road rash on my ass cheek, i tried riding back home. The bike turns on normally, but when i use the throttle, it jolts the tire once but thats it. Will removing these sensors possibly fix this? Im at work rn. I'll try later, though
@KGRowlo update: Think I found out what happened. I got home and noticed that the right side of the motor got pierced by the foot peg, and I think it smashed the hall sensor.
@@HowTeq did u ever fix this? ihave same issue, turn bike on , hit throttle it moves for a milisecond then wont anymore... throttle or hall sensor issue??
hey man I have a surron that I got rid of all the sensors on but it will randomly cut out. I have replaced the circuit breaker, voltage converter, throttle tube and wire assembly and still does it. Can anyone help?
could just be that one off wire short you have somewhere, maybe pinched or rubbed against something? But first check your main fuse and make sure the connectors are tight!
This should have been easy, BUT, the right top bolt holding in the controller was way over-torqued! The bolts should come out pretty easily just like in this video. But if you run into problems with any bolts, you can get stubborn ones out using what some people call "easy outs". In the store they are called a "max impact screw extractor set". Here is a video that shows what they look like and how to use them: ruclips.net/video/e71YwP9NWYM/видео.html In any case, I fixed my son's bike. He wheelies it all the time, and the tilt sensor must have got stuck and the bike wouldn't go. I removed the tilt sensor, and just got the cable for the kickstand sensor, and we're back in business.
I'm not sure removing the kickstand sensor is such a hot idea... The accidents I've seen due to lowered kickstand are some of the most horrific... And you DO forget it from time to time, I don't care how diligent you are... Your pulling off, made it all the way up to 50+kph, now lets go for a left turn! *goes flying* If you HAVE to remove it: Always put the stand up, BEFORE you get on the bike and do it that way every single time, until it's totally second nature!
all brakes sensors and tilt sensors are gone on mine, but you will never see me remove my kickstand sensor. No need to ride with kickstand down and curious idiots will grab the throttle when i’m parked
@KGRowlo wierd! Your nit the first person I've heard say this. I'm in Canada mind you so maybe they come tuned differently. Mine 100% does 80kph out the box green wire in tact. I'm wondering what'd happen if I do cut the wire LOL
I have heard other people say the 23 don't need unlocked too, Maybe Canada is different🤷♂️might be worth the cut to see what it does lol you can always re attach it !
@KGRowlo I'm actually planning on doing that exact thing next time I get it out! I figured the same too, worste case it fcks something up and I gotta re solder it together lol
LOCKTITE in a SURRON VIDEO!!! My lanta you are the VERY FIRST out of alllllll the youtube videos on surrons.....99.9% of the smucks are wrenching in thier moms kitchen with $8 worth of tools. As a 20yr long bike tech its PAINFUL to watch surron builds....you do things rather well my friend. Good on you. Cheers.
🙌Appreciate you🫡
If you still got the little cable thing with a led on that come with the bike you can use it to disable the break sensor. You plug it in between the controller and the battery and turn on the bike it will blink then to turn the ebrake sensor off you do 8 short press and 1 long on the front break it will then do 8 blinks to confirm it is disabled. You can turn the ebrake sensor back on doing 9 short and 1long (9 blinks will confirm it). It can be used as well to change the level or the regen braking or disable it. Level one regen braking = 2 short 1 long (2 blinks), level two regen braking = 3 short 1 long (3 blinks), level three regen braking = 4 short 1 long (4 blinks), NO Regen = 7 short one long (7 blinks).
Good to know! I was wondering how people changed the regen on these things🤟🤟thanks for sharing🙏
Do you have to do this everytime you turn the bike on ?
@@Shortseire no
@@Shortseire no
You actually don’t even need the light indicator. Just doing these exact steps without the light indicator will work the exact same 👍
Would this apply to the 2024 edition? I want to learn how to wheelie on it
Got mine in October, it’s a 2022, and it also doesn’t have the brake sensors engaged. Thought I was going crazy at first, but glad I’m not the only one! 😂🤙🏻
Good to know👌😆😭
Al fin un video decente 🤘🏻🤘🏻🍺👏🏻👏🏻
Best video for tilt sensor. Ty good job 🎉
Thanks for watching🫡🤟
What is the tilt sensor for?? Wheelies?
@origamimaster999 the Tilt sensor is a balance sensor that shuts the bike off if you crash or lean the bike too far over.
It is a safety feature that usually causes more issues then anything.
If your planning on any rough riding you will usually have to remove the tilt sensor
I want to remove de speedometer and the psort/eco switch. Is it possible? I want to be all time in sportmode.
Surron randomly powered off while riding, I just finished removing the tip over & kick stand sensor but still not getting any power 🥲 I’m gussing my controller is just shorted out
What is the main reason why you want to take off the tip over sensor. Thanks
Wheelies or if you drop the bike, it will come right back on won’t have to reset
Thanks for the quality content
Thanks for watching
Great video!
Thanks for watching
No issues after removing the kickstand sensor? I just got a lowering bracket and pegs, spacer, the works, but I’m noticing my new kickstand is gonna require the removal of the sensor.
3,500 miles in, no problems yet lol
If I just cut the kickstand wire, should the bike work if that was really the issue? Or do I need to actually unplug it to see if that was the problem?
Cutting the wire would do the same thing as unplugging it, i just didn't want random dangly wires everywhere! Make sure you cap the ends off of the wires, so they can't touch!
my 2023 has got break sensors turned off, only kickstand is on but I have no problem with that (no need to cut green wire because speed is unlocked also)
Your 23 came unlocked from the same person who turned off brake sensors🫡they don’t come unlocked
Picked up a brand new surron 2024 light bee x a few days ago. All was fine until i was playing with my kid in the garden and hitting his MTB hopper jumps. Soon as i land off the jump the bike cuts out and i have to switch it off and back on again. Any idea why this is? Thanks
Same thing happened to me I’m pretty sure it’s the tip over sensor I’m going to try taking it off see what happens
@oscarmayer3000 I did the front brake thing and disabled the engage, the brake sensor and then did same with the kick start and bike works perfectly now 👌
@@davidf0711how exactly did you do it? I have a surron that will cut out randomly after deleting all the sensors, do I have to do the disable thing after to make it work without cutting out?
@christianhansen909 hi mate, this guy explains most of it. (Link below). There's also a chart online with all the different things you can do and I have it saved to my phone but RUclips doesn't let me upload images. Search Google for surron override codes via brake lever and you should be able to find it. I have everything disabled on mine now so it never cuts out.
ruclips.net/video/3UzXmrdZA5c/видео.htmlsi=trDWLpeXspgiMJ5X
Good video do you recall if the tilt sensor would make a rattle noise when you shake it? My bike acts like it’s over heating or like I’m almost dropping it and it shuts off and only goes for a second before stoping again hope that fixes it👌
I believe it did, don’t really remember tho🤷♂️remove them sensors! Should fix it
@@KGRowlo yea I took them out and gave it a good rip and looks like it’s the battery or controller! Speed dash/display turns on and throttle moves for split second but no display on the battery or front light witch is wired😂sounds like battery now
Can I jus cut the wires cuz I can’t find the connecter to it
@@Chance377m watch the video and it shows you were the connectors are....
Some one know if ir posible to remove the speedometer with the sport AND eco switch? I dont need to know the speed AND i allways use sport mode
I have no idea, But the wires on my speedo broke and it don't work no more but the bike still operates normal! So just unplug it and remove it!
major help
🙏🫡
I slammed hard for the first time with only 500 miles on the bike and broke my right footpeg mount. ( i was doing wheelies knowing i needed to bleed my rear brake, but i learned a good lesson) After i assessed the road rash on my ass cheek, i tried riding back home. The bike turns on normally, but when i use the throttle, it jolts the tire once but thats it. Will removing these sensors possibly fix this? Im at work rn. I'll try later, though
Yes remove these sensors should fix it!
@KGRowlo update:
Think I found out what happened. I got home and noticed that the right side of the motor got pierced by the foot peg, and I think it smashed the hall sensor.
@@HowTeq did u ever fix this? ihave same issue, turn bike on , hit throttle it moves for a milisecond then wont anymore... throttle or hall sensor issue??
@@Turbski1 I did! It was quite the venture. Turns out after removing hall sensor my encoder magnet was cracked too. I should make a video.
@@HowTeq hm so i gotta replace my hall sensor dang ok
hey man I have a surron that I got rid of all the sensors on but it will randomly cut out. I have replaced the circuit breaker, voltage converter, throttle tube and wire assembly and still does it. Can anyone help?
could just be that one off wire short you have somewhere, maybe pinched or rubbed against something? But first check your main fuse and make sure the connectors are tight!
thanks, nice video !
🙏Thanks for watching🤟
I only had to disconnect the Righ Break sensor ... No More Issues
🤟
This should have been easy, BUT, the right top bolt holding in the controller was way over-torqued! The bolts should come out pretty easily just like in this video. But if you run into problems with any bolts, you can get stubborn ones out using what some people call "easy outs". In the store they are called a "max impact screw extractor set". Here is a video that shows what they look like and how to use them: ruclips.net/video/e71YwP9NWYM/видео.html
In any case, I fixed my son's bike. He wheelies it all the time, and the tilt sensor must have got stuck and the bike wouldn't go. I removed the tilt sensor, and just got the cable for the kickstand sensor, and we're back in business.
I'm not sure removing the kickstand sensor is such a hot idea... The accidents I've seen due to lowered kickstand are some of the most horrific... And you DO forget it from time to time, I don't care how diligent you are...
Your pulling off, made it all the way up to 50+kph, now lets go for a left turn! *goes flying*
If you HAVE to remove it: Always put the stand up, BEFORE you get on the bike and do it that way every single time, until it's totally second nature!
Oh I forget it all the time, Never been a problem tho, It always just kicks itself up...... Even at super high speeds🤷♂️
@@KGRowlo Maybe this one is less prone to do it, but just have a look on yt, can be bad!
@@mcbrite I’m not to worried about it
all brakes sensors and tilt sensors are gone on mine, but you will never see me remove my kickstand sensor. No need to ride with kickstand down and curious idiots will grab the throttle when i’m parked
y is there bigass blur on your face tho
great vid btw realy helped
So the ops don't know what I look like! 😆 Thanks for watching! Glad it helped!
@@KGRowlo lmao thought it was weird things that YT ai does sometime
I accidentally ripped the wire on the kick stand and my surron isn’t moving idk what to do
Follow the instructions in this video
@@KGRowlo ok thanks it worked👌
I hate these damn sensors
my kickstand sensor accidently got cut and now my bike wont run
Needs to be removed!
I don't understand what the reasoning is for removing the kickstand sensor?
Sensors can malfunction and leave you stranded, if there are no sensors that's one less worry of getting stranded!
Why are you censoring your face lol. I definitely needed this video.
Just Something I told myself I was going to do when I hit 5k subs! Thanks for watching🤟
I cant unplug it its so hard
There is a clip release that you need to push to get it to unplug
You DO NOT need to cut the wire on 2023. They come unloacked LOL.
Mines a 23 and it needed unlocked
@KGRowlo wierd! Your nit the first person I've heard say this. I'm in Canada mind you so maybe they come tuned differently. Mine 100% does 80kph out the box green wire in tact. I'm wondering what'd happen if I do cut the wire LOL
I have heard other people say the 23 don't need unlocked too, Maybe Canada is different🤷♂️might be worth the cut to see what it does lol you can always re attach it !
@KGRowlo I'm actually planning on doing that exact thing next time I get it out! I figured the same too, worste case it fcks something up and I gotta re solder it together lol
@@KGRowlosame
We wanna know what happened with the law to make u blur ur face lol
Nothing just wanted to be private after a certain number of subscribers
Why do you blur your face? This is the most poverty spec surronster I’ve ever seen
Literally the only one necessary, you didn't do
Nice thanks for watching🤟