I know a few people that have the pro colored. Ive heard mixed reviews. People say the colors are amazing but just like the 13” prestiges the printer dies or gets a error that no one can fix woth continuous use. The prestige stops printing mid print. They can’t figure out whats wrong with it.
I guess that i1600 cost less than i3200 and it’s a newer print head. But 1600 nozzles vs 3200 nozzles makes a diff on prints. But I feel you on keeping both. I have my 22 and 12 inch 2 head and we are running into the same situation with small transfers. However you can ask the manufacturer or try one that will make a bigger PET. I order 33 cm and I can do 12.5. So instead of 60 cm get 63 cm or run with no guards on the side😢 Long reply but I use a huge filtration system that can do two printers at the same time. The PM2.5 levels is what you have to watch. Also will you be doing custom ICC to color match the Ricoma?
Hi! I’ve got problem with grain effect in this printer, I found a tip on a dtf station yt channel how to get perfect red, but what about rest of the colors, have u got some tips?
I'm about to by a printer for my business. I've been spending over 1000 per month on transfers. My only concern is that one transfer companies Had bright vibrant colors, and a different transfer supplier had dull faded colors in comparison. You innterviewd a lady saying the "panda" pro colored dtf had way better colors than the R2 Pro. What are your thoughts on this?
@ajochoa6216 I think her point of view would be better than mine because I never had the panda printer. It's better to take the advise of the person that had or has both than the person that only has one. I can't speak on which one is brighter. The R2 looks great to me though in general.
It can print hight quality images of people onto a film that you can press onto a shirt yes. As long as the artwork is high quality it can print it out looking great.
@@simom813 The first thing you need to know about a dtf printer is if its left sitting without printing the print heads will clog and you will need to replace them and its really expensive depending on the dtf printer you have. Its one of those things you get if you need and not get if you wanna start a dtf business. Its kinda tricky. If you get one and you dont have the necessary business to use it will get clogged. Maybe in your case it would be better to build your business with smaller printer then scale up to a bigger printer as your business calls for it. That is the safest option for you. How deas that sound?
It doesn’t take up to much pace i would say about the space of a full bed to be on the safe size. Little wider than a twin bed but about the same length. I’m gonna have a video with the measurements coming up towards the end of the week.
LOVE YOUR PRESENTATIONS so articulate would never want the headaches to. ever try again, since I am so much older now. I am an Artist at heart Nvay phoptographer in Silicon Valley. Then Publishig games calenders posters, Then biz mrktg & property mgmt. A large venue facility with 365 day food merchandise travel entertainment 10,000 plus events. Left that too because, as a manager- you are never in charge of your income. Back to school as a senior got a doc Cinema degre. My old sign shop was often 24hr shop sometimes to meet capacity. Always a new guy in town with more money for the entry and gets employees by poaching. Because to make living you have to get minimum 3 productive artful people to be even competitive. Not like a Fed X center. And you never know when they are leaving. A magical balancing act. Would rather use a guy like you than even try.
I hear you. Congratulations on all of your many accomplishments. You should be proud of your work. It a lot to deal with as a business owner but if we aren’t problem solving on consistent basis are we living life. I thank God for the obstacles. Im gonna keep on trying and figuring out how to compete and elevate until i physically cant.
everybody scared of that powder now i just got a dtf setup and scared to turn it on 3yrs is all it took. im waiting on the new powderless white adhesive.
That makes a lot of sense.
Thank you.
Allan, what have you heard of the Procolored A3 Pro printer? How has your prestige printer been performing lately?
I know a few people that have the pro colored. Ive heard mixed reviews. People say the colors are amazing but just like the 13” prestiges the printer dies or gets a error that no one can fix woth continuous use. The prestige stops printing mid print. They can’t figure out whats wrong with it.
What are the power requirements?
Standard house 120 outlet for the printer and dryer.
Hey, what's your thoughts on the Prestige L2?
It looks good but beyond that I cant give you any thoughts considering I’ve never used it or spent any time with it. It looks cool though.
Thank you for this valued information, Question? do you recommend this machine for star a t-shirt business? we want to star
All depends on what your business model is. Are you primarily selling shirts or transfers?
I guess that i1600 cost less than i3200 and it’s a newer print head. But 1600 nozzles vs 3200 nozzles makes a diff on prints. But I feel you on keeping both. I have my 22 and 12 inch 2 head and we are running into the same situation with small transfers. However you can ask the manufacturer or try one that will make a bigger PET. I order 33 cm and I can do 12.5. So instead of 60 cm get 63 cm or run with no guards on the side😢 Long reply but I use a huge filtration system that can do two printers at the same time. The PM2.5 levels is what you have to watch. Also will you be doing custom ICC to color match the Ricoma?
You have to do what works best for your shop and your situation. I would much rather have both so I can run separate jobs at the same time.
Thank you!
@@richardstokes7508 Thank you!
Does it have instructions on what to do when you can't do the maintenance for over a week? I travel often. Thanks for sharing the information 😊
They recommend wet capping the printer if you will be away for over 4 days.
@@adubbproductions thanks for the information 👍🏽
Thanks for the game...
For sure.
I got the a3+ and my capping station clogged I had to take the whole thing apart to clear the clog .
Is this printer still doing good? I need your honest opinion
It seems to be. I know people using them.
Great info! How does this one compare to the uninet1000?
It’s better.
Hi! I’ve got problem with grain effect in this printer, I found a tip on a dtf station yt channel how to get perfect red, but what about rest of the colors, have u got some tips?
I'm about to by a printer for my business. I've been spending over 1000 per month on transfers. My only concern is that one transfer companies Had bright vibrant colors, and a different transfer supplier had dull faded colors in comparison. You innterviewd a lady saying the "panda" pro colored dtf had way better colors than the R2 Pro. What are your thoughts on this?
@ajochoa6216 I think her point of view would be better than mine because I never had the panda printer. It's better to take the advise of the person that had or has both than the person that only has one. I can't speak on which one is brighter. The R2 looks great to me though in general.
@@adubbproductions thank you. It's hard for me to make a decision without seeing the end product.
You are doing well ? I haven't talked with you in such a long time! Blessings to your business and family ❤
Yes. I’m doing very well. Learning new things so I can come back and teach more.
Do a video of this in action
Coming this week.
I'm a fan of your RUclips channel. I'm curious, can your dtf machine print images of persons onto shirts? If so will it be high quality?
It can print hight quality images of people onto a film that you can press onto a shirt yes. As long as the artwork is high quality it can print it out looking great.
I'd like to start a DTF printing business. How do I get started?
Do you currently have customers asking for dtf? Do you currently have a printing business?
@@adubbproductions No I don't. I'm exploring starting a business. I know nothing about it.
@@simom813 The first thing you need to know about a dtf printer is if its left sitting without printing the print heads will clog and you will need to replace them and its really expensive depending on the dtf printer you have. Its one of those things you get if you need and not get if you wanna start a dtf business. Its kinda tricky. If you get one and you dont have the necessary business to use it will get clogged. Maybe in your case it would be better to build your business with smaller printer then scale up to a bigger printer as your business calls for it. That is the safest option for you. How deas that sound?
@@adubbproductions Cool. So what kind of printer should I start off with?
How much space would you need to have the DTF printer along with the Miro 13?
It doesn’t take up to much pace i would say about the space of a full bed to be on the safe size. Little wider than a twin bed but about the same length. I’m gonna have a video with the measurements coming up towards the end of the week.
@@adubbproductions Thank you
That makes sense to me👍🏽
Thank you.
Are the prestige R2 pro dtf and shaker noisy? Im worries it will upset my neighbours as im putting it in the garage.
It’s not that bad at all. You should definitely go check out a trade show to be sure. I don’t think it’s loud at all though.
How can I get some transfers?
Order here allanawade.com/collections/dtf-transfers-1
Does it work with a desktop
A desktop computer? Yes.
LOVE YOUR PRESENTATIONS so articulate would never want the headaches to. ever try again, since I am so much older now. I am an Artist at heart Nvay phoptographer in Silicon Valley. Then Publishig games calenders posters, Then biz mrktg & property mgmt. A large venue facility with 365 day food merchandise travel entertainment 10,000 plus events. Left that too because, as a manager- you are never in charge of your income. Back to school as a senior got a doc Cinema degre. My old sign shop was often 24hr shop sometimes to meet capacity. Always a new guy in town with more money for the entry and gets employees by poaching. Because to make living you have to get minimum 3 productive artful people to be even competitive. Not like a Fed X center. And you never know when they are leaving. A magical balancing act. Would rather use a guy like you than even try.
All typos have been carefully made for autistic affect. Until you hit Reply it is perfect.
I hear you. Congratulations on all of your many accomplishments. You should be proud of your work.
It a lot to deal with as a business owner but if we aren’t problem solving on consistent basis are we living life. I thank God for the obstacles. Im gonna keep on trying and figuring out how to compete and elevate until i physically cant.
Tell us the price of those machines
Around 9k depending on the bundle you get.
Yess makes alot of sense. No waste wanted absolutely NOT!!
Exactly.
everybody scared of that powder now i just got a dtf setup and scared to turn it on 3yrs is all it took. im waiting on the new powderless white adhesive.
Why, just put in a respirator and some goggles. Easy fix.
@@adubbproductions i thought about that but all tne new dtf machine dryers are bullet proof no body is sniffing the powder it reminds me of asbestos.
@scorpionvice12 exactly. Yet and still no one gets hurt from taking to much precaution.
@@adubbproductions they still got those ovens that have a filter. Are they any good?
Price please
For the package I have it’s $10,600 at the moment.
The content is valuable, but the audio channels require improvement due to excessive feedback.
Thank you. Yea, my audio transmitter and receiver broke.
@@adubbproductions I’ve been thinking on purchasing the R2, be honest how good it’s the machine, we are just starting.
Heard a story where this guy got cancer from specifically DTF printers. Just not worth it.
Who can afford these fr
You.