🛒 BETAFPV Pavo20 PRO NIGHTFIRE EDITION - rb.gy/lki9zp use code AKBF24 for 20% off storewide 11/21 to 12/2 other codes will only be 15% off 🔋 LAVA Lipos - bit.ly/LAVALipo 👉 Pavo20 PRO Review - ruclips.net/video/GjG06sIzhF4/видео.html
Love the plain LEDs on my Pavo20, stoked for this LED option, looks sick! And as a crash enthusiast who occasionally flys this discount will come in handy for new spare airframes. Double whammy of awesome. Thank you!
Sweet discount code, thanks for sharing. 👍 Cool led kit on that Pavo20 pro. Some of those modes are hypnotic. 💛💚💙🩵💜😵💫. The grandkids would get a kick out it. 😎
I was about to install the led strip on my pavo20 pro after testing it but these LEDs look so much better. Are these able to be controlled through beta flight via switches on a radio?
The first mode defers to Betaflight and how the LEDs are programmed in the FC. I assume you can control the LEDs however you want but I don't know much about how to program LEDs in Betaflight.
@AlbertKimTV I seen a vid where he said if it's angled down a bit (he didn't give an exact) you can see the frame (duct) in the video feed. I wondered if it was thaaaaat close, the video would pick up the lights. Suppose it's not super bright. I have some cob 6s led's on a 5" and I had to cut them off the front because they were too bright and showed up on the feed. All good tho. Have a extra 03, I figured maybe I should have a under 250g in my arsenal that runs 03 (so I don't get in trouble) lol the lights are just a bonus I guess. Waiting on the code to activate so I can order. I'd order now but she's not activated yet. Thanks for the great content :)
I installed my LED controller on my nightfire today, I have a question though. There is a lock nut under the frame that is in the way of the LED controller is it okay to remove it? It's originally in-between the frame and therubber bushing, but won't fit in the hole on the LED controller.
It's not a lock nut but a standard nylon nut and you put the board between the carbon frame and the nut (use the nut to secure the board to the frame).
@AlbertKimTV on mine there is a metal nut directly under the top plate, it needed backed off to remove the screw. The screw goes through the top plate, through the metal lock nut, through the rubber bushing, then into the pressed nylon nut that's in the bottom part of the frame. So do I mount the night fire chip flush with the underside of the top plate, then run the screw through the hole in the chip, then through the nut, through the bushing, then into the nylon press nut?
Kinda reminds me of the speedybee LED but they have the bluetooth option. Thanks for the discount code, I shouldn't be buying anything else but can't let the discounts pass me up like that 😂
@vanlifefpv6340 what kind of car sports car or sedan. If I'm not going off road the good gas mileage of a car is nice. But has been nice having a suv and having so much room for my stuff. And when on road trips with the dog. But if want to have a lil more fun I take my car (camaro) but granted on the streets only so much fun u can have going slow.
🛒 BETAFPV Pavo20 PRO NIGHTFIRE EDITION - rb.gy/lki9zp
use code AKBF24 for 20% off storewide 11/21 to 12/2
other codes will only be 15% off
🔋 LAVA Lipos - bit.ly/LAVALipo
👉 Pavo20 PRO Review - ruclips.net/video/GjG06sIzhF4/видео.html
Love the plain LEDs on my Pavo20, stoked for this LED option, looks sick! And as a crash enthusiast who occasionally flys this discount will come in handy for new spare airframes. Double whammy of awesome. Thank you!
LEDs are cool if you're flying at night and chasing other LED drones. Party lights on this one!
Drone chasing would be interesting at night with these lights.
I like the variety of patterns and speeds! Thanks for the discount code!
Thanks for the 20% off discount code. Always looking out for your viewers! You're the best!
No problem! Happy to help!
Thanks for the coupon code. Will come in handy as I have a lot of stuff I want to buy!
happy to help!
Sweet discount code, thanks for sharing. 👍
Cool led kit on that Pavo20 pro. Some of those modes are hypnotic. 💛💚💙🩵💜😵💫. The grandkids would get a kick out it.
😎
I want those LEDs for my radio!
Where will you put them?
Thanks for sharing the discount code to Betafpv. Nice light 💡 version, the different color modes are pretty cool.
This would be 😎 flying in convoy.
The nightfire fits securly on the front left arm of the drone (the hole on the chip goes around the camera mount dampener)
wonder if this drone can fit a walksnail moonlight kit VTX
@@NeroEmmanuelDoma yes, it can.. I've just done it, but it's not east
I was about to install the led strip on my pavo20 pro after testing it but these LEDs look so much better. Are these able to be controlled through beta flight via switches on a radio?
The first mode defers to Betaflight and how the LEDs are programmed in the FC. I assume you can control the LEDs however you want but I don't know much about how to program LEDs in Betaflight.
@ thank you!
nice vid, could i control the light colour through the scroll wheel on the radiomaster pocket
Probably could be programmed in Betaflight but I don't know how to do it personally.
Do youi see the lights in frame?
Do you mean in the video feed? Only if you're flying in pitch black darkness... in that case it helps illuminate the area so you don't crash.
@AlbertKimTV I seen a vid where he said if it's angled down a bit (he didn't give an exact) you can see the frame (duct) in the video feed. I wondered if it was thaaaaat close, the video would pick up the lights. Suppose it's not super bright. I have some cob 6s led's on a 5" and I had to cut them off the front because they were too bright and showed up on the feed. All good tho. Have a extra 03, I figured maybe I should have a under 250g in my arsenal that runs 03 (so I don't get in trouble) lol the lights are just a bonus I guess. Waiting on the code to activate so I can order. I'd order now but she's not activated yet. Thanks for the great content :)
I installed my LED controller on my nightfire today, I have a question though. There is a lock nut under the frame that is in the way of the LED controller is it okay to remove it? It's originally in-between the frame and therubber bushing, but won't fit in the hole on the LED controller.
It's not a lock nut but a standard nylon nut and you put the board between the carbon frame and the nut (use the nut to secure the board to the frame).
@AlbertKimTV on mine there is a metal nut directly under the top plate, it needed backed off to remove the screw. The screw goes through the top plate, through the metal lock nut, through the rubber bushing, then into the pressed nylon nut that's in the bottom part of the frame. So do I mount the night fire chip flush with the underside of the top plate, then run the screw through the hole in the chip, then through the nut, through the bushing, then into the nylon press nut?
Just tried the akbf24 code but it says invalid code
The code is AK24BF
Kinda reminds me of the speedybee LED but they have the bluetooth option. Thanks for the discount code, I shouldn't be buying anything else but can't let the discounts pass me up like that 😂
It seems the SpeedyBee LED with bluetooth isn't for sale anywhere. I only see the standard one with no bluetooth. Where did you see them for sale?
Just looking at this yesterday. Cause I was eyeing flytimes 85hd.. so curious how this compares to it
FlyTimes seems to be a lot lighter. How do you think a car compares to an SUV?
@vanlifefpv6340 what kind of car sports car or sedan. If I'm not going off road the good gas mileage of a car is nice. But has been nice having a suv and having so much room for my stuff. And when on road trips with the dog. But if want to have a lil more fun I take my car (camaro) but granted on the streets only so much fun u can have going slow.
@@divingfalconfpv4602 My point is that those two things are in different categories so they don't compare at all.
It really looks great, Albert! Loved it! 😃
Thanks for the review!
Stay safe there with your family! 🖖😊