I think we have to wait for the exact specs of the O4 lite because for me it's unclear about the final weight of the unit, price, maybe higher latency because it's a cheaper and smaller board (?).
@@JoshFPV24 its been leaked that its 30ms. and i think the o3 was advertised at like 55ms or something, but as we all know it sacrificed ms latency to process multipathing to keep the image high quality. whereas hdzero will sacrifice your video feed quality and retain its latency. so i aint sold on the dji o4 or lites until someone shows off their latency when penetrating everyone knows hdzero penetration sucks but at least its latency remains consistent during its bad penetration.
Looks like the batteries aren't powerful enough for that setup. The voltage sag even at the beginning of the flight shows it dropping to 3.2v right away.
That Lux camera looks really good. Hopefully Happymodel does what you suggest by raising the fc. I've had issues with loose lipos before, I just wrap some kapton tape around the lipo. Usually my problem is the lipo is too fat, (not puffed 😁) and gotta stuff it in. Happy flying everyone. 😎
Camera looks good, seems like a good cruiser whoop for calm outdoor conditions. Camera seems like the best upgrade on the mob7. Can’t wait for the HDzero video.
yea, triblade on 0802 is a bit questionable. Something a little bigger would be good. Think the 0802 cant really handle the triblades and therefore the hard voltage sag. 0802 with the UL biblades would be much better
I love my mobula6 freestyle hd. I haven’t really used anything else since I got it. I did have to update with betaflight 4.5 to get rid of some arming issues, but it’s been perfect since. I don’t feel like it lacks power and I get around 3 minutes of flight indoors. I thought the mobula7 would have much longer flight times and feel relatively powerful. I have a few air75 frames laying around. I’d like to see what this could do on an air75 frame and a lava 450 or 550, and possibly updated tune.
To solve the battery slot issue you can buy a betafpv Air75 frame. It's quite cheap ($5). You will probably also save 0.5-1 grams during this upgrade because I remember mobula frame is slightly heavier.
@@AlbertKimTV yeah, of course. I understand. Just wanted to mention this option because my first thought was to use tape to make the battery thinker, but then I remembered that BetaFPV have a really nice frame.
What I do is just wrap a little bit of Scotch tape around the part of the battery that sits in the battery tray. It adds practically no weight and my batteries never slide around (unless I crash it face first while going fast 😂)
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
🛒 Mobula7 Freestyle HD - rb.gy/i85dx5
🍿 Extra Flights - ruclips.net/video/0plna75FQDA/видео.html
🎬 Mobula6 Race HD Review - ruclips.net/video/JPm-dQ_cuSs/видео.html
All new micro quads coming out. Great review Albert. I really enjoy your micro quad reviews. Very nice.
Just a general question for those considering HDZERO. With the new O4 air units coming out soon, who is debating that or HDZERO? Is it even a debate?
I think we have to wait for the exact specs of the O4 lite because for me it's unclear about the final weight of the unit, price, maybe higher latency because it's a cheaper and smaller board (?).
im a big hdzero user.
the new DJI O4 unit specs look v good.
30ms latency in race mode apparently.
@@SHERMA. I heard it was 15ms which is about the same as hdzero
@@JoshFPV24 its been leaked that its 30ms.
and i think the o3 was advertised at like 55ms or something, but as we all know it sacrificed ms latency to process multipathing to keep the image high quality.
whereas hdzero will sacrifice your video feed quality and retain its latency.
so i aint sold on the dji o4 or lites until someone shows off their latency when penetrating
everyone knows hdzero penetration sucks but at least its latency remains consistent during its bad penetration.
@@SHERMA. I heard it was 15ms
Team 450mAh 1S Lipo! Lux camera is awesome!😃
Looks like the batteries aren't powerful enough for that setup. The voltage sag even at the beginning of the flight shows it dropping to 3.2v right away.
I've got the same problem with the battery tray on my Race Spec Hummingbird. Thanks for your review!
That Lux camera looks really good. Hopefully Happymodel does what you suggest by raising the fc.
I've had issues with loose lipos before, I just wrap some kapton tape around the lipo. Usually my problem is the lipo is too fat, (not puffed 😁) and gotta stuff it in. Happy flying everyone. 😎
How are those AIO5's holding up? I'm hearing the ELRS receiver on those boards are failing at a high clip.
Better the elrs than the vtx. For the elrs u can connect a external rx 🙈
Noticed the voltage sag right away. Seems like its a little on the chubby end with that motor setup 😂
Camera looks good, seems like a good cruiser whoop for calm outdoor conditions. Camera seems like the best upgrade on the mob7. Can’t wait for the HDzero video.
Is the upgrade the Lux offers over the Eco worth it in your opinion.
Definitely worth the extra few bucks
The new O4 air units are coming out soon, don't bother with hdzero people.
Like the antenna clip ,footage looks good, could it be upgraded to 2S BT3.0 ?
Aio5 can't do 2s so no
Im just gonna swap it to the air 75 frame. Those frames are my favorite of all time. So durable too
Nice review but I'd rather see more DJI videos.
Surprised they didn’t put their 1002’s on instead of the 0802’s.
@@mattheww9656 1002 would be too heavy for 1s, wouldn’t be much of freestyle anymore
yea, triblade on 0802 is a bit questionable. Something a little bigger would be good. Think the 0802 cant really handle the triblades and therefore the hard voltage sag. 0802 with the UL biblades would be much better
Is banggood the only place to purchase this quad? I’ve looked everywhere for this for a few weeks now
Only place I know that has it in stock right now.
actually just ordered it on pyrodrone!
I love my mobula6 freestyle hd. I haven’t really used anything else since I got it. I did have to update with betaflight 4.5 to get rid of some arming issues, but it’s been perfect since. I don’t feel like it lacks power and I get around 3 minutes of flight indoors. I thought the mobula7 would have much longer flight times and feel relatively powerful. I have a few air75 frames laying around. I’d like to see what this could do on an air75 frame and a lava 450 or 550, and possibly updated tune.
Awesome review, Albert! Thanks! 😃
It looks like a pretty fun little quad!!!
Merry Christmas!
Stay safe there with your family! 🖖😊
To solve the battery slot issue you can buy a betafpv Air75 frame. It's quite cheap ($5). You will probably also save 0.5-1 grams during this upgrade because I remember mobula frame is slightly heavier.
Thanks but for a review video, I have to keep the stock frame.
@@AlbertKimTV yeah, of course. I understand. Just wanted to mention this option because my first thought was to use tape to make the battery thinker, but then I remembered that BetaFPV have a really nice frame.
What I do is just wrap a little bit of Scotch tape around the part of the battery that sits in the battery tray. It adds practically no weight and my batteries never slide around (unless I crash it face first while going fast 😂)
@@mikerich32 I was thinking about that too but I'm the video the gap is quite huge.