This is the first video I've seen on this topic that sounds like it actually relates to the issue I have with my own iMac 2010 21.5"! I like how you showed how loose the ribbon cable was under the scope and how you replaced the connector and damaged filter. I damaged my iMac in the same way - replacing the internal drive and the LCD fell forward and pulled the LVDS ribbon cable from the connector. The iMac works fine with an external display but I can't get the internal display to light up and wish I could mail it to you but transborder it would be costly. This iMac was given to me and is not my primary computer, so for now I will just use it with an external display. Thanks for an informative video!
I love all your videos. You work smart. While I'll never need to do this myself it's fun to see how it's done. I know one thing, if I need a repair it's going to you. A nice family business.
My iMac 2011 21.5 inch same problem ,black display ,fan runs at full speed.I found near display connector R5280 ,R5281 no response with meter continuity mode .please help me how can I get that spare.?is there any alternate spare for this from any other device like pen drives sorry if I am wrong.
Nice video! Btw i think that "filter" is a 0Ohm carbon oxide resistor most used in laptops motherboards to separate the power rails, when you´re looking for a short socket.
What do you think would be the problem if all three indicator lights are lit, but the mac is not seeing the lcd. It is running with an external display, not not giving any option for the lcd display in the display utility.
My imac 27 2011 screen goes black while imac is still working ( Screen sharing to macbook still working too) .. when I press power button for 1s and click on the mouse screen came back on (sometimes i need to repeat it few times) ,,, I've done PRam and nvram reset ,imac was cleaned Gpu ,Pcu termal paste change but did not helped ... Any advice ? ( Screen sharing to macbook still working during black screen on imac ) .. Any advice ?
I m facing the same problem in my imac 2017 4k but the lvds connector on screen is loose and the lvds cable showing all points continous so i think cable is ok
Hello sir! I need help. This is the same with my Imac. But i tested the filter and it does connect. I dont know the problem. Unfortunately we dont have any repair technicians here in Ph. Thank you sir!
I need help about old "Early 2009 24 A1225 Imac" Display! Can i replace a LM240WU2(SL)(B4) with another LM240WU2(SL)(B2) Display? Could someone help me please?
Hi ! thanks for your video! would it be possible to know what the filtre is i guess i have the same issue. i'm from algerie i would have loved to ship you the unit. thanks in advance. great job
My imac is suddenly off now nothing happened is it motherboard problem. Model imac 28 inch 2012. Please give me suggestions and fixed it if I send MB to u by Dhl. Thank u. Marry Christmas to u
Que propósito tiene una M2 en una iMac Apple aparte de ello un disco duro mecánico se queda en el Logo y no termina de cargar el sistema 😊 saludos buena información
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
This is the first video I've seen on this topic that sounds like it actually relates to the issue I have with my own iMac 2010 21.5"! I like how you showed how loose the ribbon cable was under the scope and how you replaced the connector and damaged filter. I damaged my iMac in the same way - replacing the internal drive and the LCD fell forward and pulled the LVDS ribbon cable from the connector. The iMac works fine with an external display but I can't get the internal display to light up and wish I could mail it to you but transborder it would be costly. This iMac was given to me and is not my primary computer, so for now I will just use it with an external display. Thanks for an informative video!
I love all your videos. You work smart. While I'll never need to do this myself it's fun to see how it's done. I know one thing, if I need a repair it's going to you. A nice family business.
Good luck you giving knowlege to the people and share ur experience
hello I have the same thing happening to my iMac my connect don't feels lose but still screen not coming on can u help with any ideals Sam in the uk
what is that gel substance he is putting? is that a rosin
Hi brate, thanks for your video, can you tell me what's the filter reference? did you find the Schematic since then ?? Hvala
Having the same issue, good work
we have learned a lot from your videos thank you for taking time to share your amazing experiance
My iMac 2011 21.5 inch same problem ,black display ,fan runs at full speed.I found near display connector R5280 ,R5281 no response with meter continuity mode .please help me how can I get that spare.?is there any alternate spare for this from any other device like pen drives sorry if I am wrong.
Same logic board all smd caps short beeping in both sides. No led lights on it all ..where should I start to find was causing everything is ground ??
imac 2013 27” how much cost? same issue. display not turn it on
what is the filter model?
Did you take the filter from the salvaged board?
Nice video! Btw i think that "filter" is a 0Ohm carbon oxide resistor most used in laptops motherboards to separate the power rails, when you´re looking for a short socket.
yes u r right
How can you tell?
What do you think would be the problem if all three indicator lights are lit, but the mac is not seeing the lcd. It is running with an external display, not not giving any option for the lcd display in the display utility.
My imac 27 2011 screen goes black while imac is still working ( Screen sharing to macbook still working too) .. when I press power button for 1s and click on the mouse screen came back on (sometimes i need to repeat it few times) ,,, I've done PRam and nvram reset ,imac was cleaned Gpu ,Pcu termal paste change but did not helped ... Any advice ? ( Screen sharing to macbook still working during black screen on imac ) .. Any advice ?
I m facing the same problem in my imac 2017 4k but the lvds connector on screen is loose and the lvds cable showing all points continous so i think cable is ok
Nice work young man..
Hello sir! I need help. This is the same with my Imac. But i tested the filter and it does connect.
I dont know the problem. Unfortunately we dont have any repair technicians here in Ph.
Thank you sir!
I need help about old "Early 2009 24 A1225 Imac" Display! Can i replace a LM240WU2(SL)(B4) with another LM240WU2(SL)(B2) Display? Could someone help me please?
Great job again like always
Hi ! thanks for your video! would it be possible to know what the filtre is i guess i have the same issue. i'm from algerie i would have loved to ship you the unit. thanks in advance. great job
Hi. Any one successfully connect an iMac to external monitor (using mini DVI cable) and boot? with internal LCD disconnected?
yes but the fan will run wild and youll probably be running at half speed. iMacs must have the internal screen attached.
i think sir it is coil or resistance
My imac is suddenly off now nothing happened is it motherboard problem. Model imac 28 inch 2012. Please give me suggestions and fixed it if I send MB to u by Dhl. Thank u. Marry Christmas to u
what flux you use the most and why pls
rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dm570.l1313%26_nkw%3Damtech%2Bv2%26_sacat%3D0&campid=5338440312&toolid=20008
Que propósito tiene una M2 en una iMac Apple aparte de ello un disco duro mecánico se queda en el Logo y no termina de cargar el sistema 😊 saludos buena información
how much does it cost to fix this? before the best buy technician hits me with $300 bill
I have a 2010 iMac with the same problem, how much would I be for you to fix it and how?
Anthony Geigel hey if you’re still wondering it’s the first link in his description
good video mate, but i need some help on connecting the raspberry pi to the mac using the lcd cable
🙄🙄
You can try get a lcd display driver board and make it an external monitor
@@tommyhuangli thank you will try that
Where is your twin brother in New York city?
Felt the same when it worked 😂🖖🏻
Awesome 👏🏾
Where are you from - I like your videos - no chat rooms -
Good work
Its difficult to repair if you dont have spare parts
great and nice job SIR
Good job man
brilliant.. Good watch
How is it so many people send you stuff for repair and fail to send a message detailing how things are not working??? Silly people.
Awesome
Without display fans fullspeed? This the question.
Awesome ✌️✌️✌️
Lmao "alleebama" i love your chanell
nice sir
Nice
Jajjajajajaja su reparacion es la cagada