That’s pretty cool stuff I knew a guy 40 years ago that would make gun cotton. he actually made two guns for it one was made out of plexiglass and one was made out of brass. I used to have both of them. Nice video
Its crazy fun and satisfying, though Ive got a few ideas to improve it. Got to get that wobble out of the trajectory. Might go up a size in pvc. I think McDonalds straws are the strongest...
It’s funny I subscribed thinking “this guys cool, probably won’t ever see his videos again unless I susbscribe.” Then Schell repeats my exact sentiments. Great videos btw!!
you prolly dont care but does someone know of a trick to log back into an Instagram account?? I stupidly forgot my login password. I would appreciate any tips you can give me
@Roger Layton I really appreciate your reply. I found the site through google and im waiting for the hacking stuff atm. Takes quite some time so I will reply here later with my results.
Then use a crossbow bolt and make some ballistics gel test its sectional density, weigh it in grams, and determine the foot pounds of energy inflicted upon the target.
Shoot some old full spray paint cans .with leading edge being a blow gun dart to puncture the cans and a fire or spark just go behind. It will light the air into a -15 by 15 foot radius and make a awsome whoosh sound.make sure you duck tape the cans at the bottom to the stable base of some sort or the cans will spray in an un concentrated amount thus reducing impressiveness and fireball that will ensue
Amazing! One of the coolest videos I have seen in a while :) I have a question though, how reliable are the lil .22 rounds at going off? They seemed to work every time here but what if it hits at a weird angle or something soft, I assume it would have a hard time working then?
Try a carbon shaped charged, maybe the heat and pressure will convert some of the particles into diamond dust and cause more dmg, maybe a glue version and a compressed version
When first spying your gun cotton blow gun device I never considered putting explosives in a blow gun tube to propell but to receive the gun cotton charge at the target. Back 50 years ago I read about pioneers defending a fort with a cannon made from a maple tree wrapped with barrel rings every 6 inches and it blew up after two shots. I mention this because I would consider a blow gun detonation in the same category. What you want is exploding blowgun darts not propellant. 5 grams should make good exploding darts. All you need is black powder musket caps and have a spring release at the target to strike the cap to detonate the dart. You have to make the dart as light as possible to blow the neck off the mallard you are trying for. My guess is that this is illegal in any country on earth.
Nice I got 20 months for this as a dangerous article , for my RND in Australia . so than i did it with out armstrong , and get another 8 months detainment , each time they take computers gaged me and receive control orders upon me . not for what I did but for what I know . now it's US patented . and my gag orders are expired . you must learn to make proper cones out of waxed dipped paper , they line up better in the air . and you can make the ignition with ordinary safety matches and P 4 regent , striker.
Would be an interesting engineering challenge to be sure. You'd probably have to use some sort of magazine system like a firearm and it wouldn't run very long, but it could be done I bet.
Hurting no one? No crime and there are PLENTY of "how to's" for worse that this. No way should you get any time because of what you MIGHT do hell, every guy has a c*ck but it doesn't mean we're going to go commit rape. Too many stupid judges, politicians and cops. Then again, do this in city limits and...well you get what you deserve. Sure some twisted a-hole is always going to hurt someone else, but that's the human race for you
That’s pretty cool stuff I knew a guy 40 years ago that would make gun cotton. he actually made two guns for it one was made out of plexiglass and one was made out of brass. I used to have both of them. Nice video
So far I think this is your best build yet.
Its crazy fun and satisfying, though Ive got a few ideas to improve it. Got to get that wobble out of the trajectory. Might go up a size in pvc. I think McDonalds straws are the strongest...
Oh and its got to have a laser target for sure...
Yep, agreed! This is your best yet brother.
It’s funny I subscribed thinking “this guys cool, probably won’t ever see his videos again unless I susbscribe.” Then Schell repeats my exact sentiments. Great videos btw!!
Absolutely amazing! I love this creation. Nice work
Dude that is too cool. I wish I could tell you I wasn't gonna try to do it. At least I am an adult..... kinda.
Yooo that "lets roll" transition tho
First thing that came to my mind: "Grown up Harry Potter wand"
Test their velocities with a chronograph
Very cool , its just about the same thing as a fireworks mortar.
Yup. Notice the straw dart is all floppy in flight. Needs improvement.
How are your neighbors dealing with the PTSD?
😂👍 Excellent channel!
Dang schel!, you've came a long way since that first video when you made gun cotton! Great video! Thanks for sharing!:)
That's an awesome bit of kit mate, I love your work.
Glad to see your still doin well man 😊
You would make a great neighbor
Thanks so much. This is awesome.
A cool addition would be a slab of meat on the target to analyze the full effect.
Entertaining and thank you for the laughs.
damn those slow mos are strangely satifying!
For night time shots I would add a little bit of color maybe some red and green
That’s bloody hilarious!😂🤣😂🤣
Love your channel. Thank You
Very cool, try taping a cheap laser pointer onto the tube to help targeting.
you prolly dont care but does someone know of a trick to log back into an Instagram account??
I stupidly forgot my login password. I would appreciate any tips you can give me
@Grey Esteban instablaster ;)
@Roger Layton I really appreciate your reply. I found the site through google and im waiting for the hacking stuff atm.
Takes quite some time so I will reply here later with my results.
@Roger Layton it did the trick and I finally got access to my account again. Im so happy!
Thank you so much you really help me out !
@Grey Esteban happy to help xD
Don't try this at home but the office would be a much better place to try it.
LOL!!!
Pumpkin should work.... try it brother.... best video of the month for me!
Yup Is it too late to get a pumpkin? Melon? Gourd? Anyone?
Dont try this at home he says.... Ok, ill do this at work since i have a lot of free time. Bwah-HA HA HA!
Then use a crossbow bolt and make some ballistics gel test its sectional density, weigh it in grams, and determine the foot pounds of energy inflicted upon the target.
Shoot some old full spray paint cans .with leading edge being a blow gun dart to puncture the cans and a fire or spark just go behind. It will light the air into a -15 by 15 foot radius and make a awsome whoosh sound.make sure you duck tape the cans at the bottom to the stable base of some sort or the cans will spray in an un concentrated amount thus reducing impressiveness and fireball that will ensue
Be careful about putting what is essentially smokeless powder in thin tubes.
Yup. Smokeless (nitrocellulose) in one end, and flash powder in the other.
I like it! If you do shoot pumpkins you might as well fill them with water too. I wonder if you could get good enough to shoot soda cans?
id like to see an electronic muzzleloader that shoots lead balls or shot
Don’t think it would be much good for squirrel hunting.
Great video!!! Nice shave Bro.
As a kids we did a similar thing with cross bow bolts...... then Johnny took our guns away. No more fun. 🤣😂😁😀😎
Very entertaining!
Would gun cotton be a viable propellant for reloading shells?
It would work but not reccomended at all
It's what smokeless propellant is made from, single base is nitro cellulose with very few additives.
6:09 great sfx
Awesome!
ight so uhhhh... this can take down a moose, tested and confirmed
to be clear I think I got a bit larger payload but works nonetheless
Fr?!
the title had me on every level
Sorry im very late but what did you use for the impact explosion?
That's friggin Awesome!
Tell ya what, I'll pass and just watch from here!
Thank you for the interesting entertainment.
Be Safe!
Amazing! One of the coolest videos I have seen in a while :)
I have a question though, how reliable are the lil .22 rounds at going off? They seemed to work every time here but what if it hits at a weird angle or something soft, I assume it would have a hard time working then?
Yea they have to hit with good force to go off. Not working on soft targets like melons though.
@@schelsullivan yeah that makes sense :)
Wow this video has an assassin Creed vibe 🤣
That was bad ass
Try a carbon shaped charged, maybe the heat and pressure will convert some of the particles into diamond dust and cause more dmg, maybe a glue version and a compressed version
When first spying your gun cotton blow gun device I never considered putting explosives in a blow gun tube to propell but to receive the gun cotton charge at the target. Back 50 years ago I read about pioneers defending a fort with a cannon made from a maple tree wrapped with barrel rings every 6 inches and it blew up after two shots. I mention this because I would consider a blow gun detonation in the same category. What you want is exploding blowgun darts not propellant. 5 grams should make good exploding darts. All you need is black powder musket caps and have a spring release at the target to strike the cap to detonate the dart. You have to make the dart as light as possible to blow the neck off the mallard you are trying for. My guess is that this is illegal in any country on earth.
badass!!!
Oh this is way tamer than the shit I'm doing don't worry
Nice I got 20 months for this as a dangerous article , for my RND in Australia . so than i did it with out armstrong , and get another 8 months detainment , each time they take computers gaged me and receive control orders upon me . not for what I did but for what I know . now it's US patented . and my gag orders are expired . you must learn to make proper cones out of waxed dipped paper , they line up better in the air . and you can make the ignition with ordinary safety matches and P 4 regent , striker.
How long does your vape coil last?
Seems safe
Hell ya 👍 America
You could try making a volley gun. :)
Properly made gun-cotton should not leave any residue.
I'd like to see someone reload and fire a cartridge with gun-cotton ans the propellant.
That was awesome ! Best youtuber Period!
Well, I dont know about that!
More bang for your buck.
Cans of paint...
Can they be made with more explosive power ?
Is the barrel cpvc or cooper?
How far will that beast shoot said materials
Even using a heavier rocket
U shud crony one.. Cool project first time seeing one of ur vids iam sub in..!!
This guy has so much junk in his garage
How about a 209 shotgun primer
Re invented the gun.
Coming up Next!
_The Wheel!_
😆
ola schel sullivan adorei seus vidios qual o nome deste asendedor quero comprar este detonador eletrico omde comsio um deses ai valeu amigo
How does it compare to black powder? Could you load shot gun shells with it?
It's far more powerful than gunpowder lol
Hey you still making videos?
Reminds me of Mc Gyver or however you spell it.
dude !
no-homo, but i ❤ you
Sweet
Badass
Could you build the same thing but , say put it on steroids?
Y can't this guy b my uncle
ola amigo como quro comprar um asendedor desse amigo gostei do vidio
Scott Bakulas evil twin?
Interesting.
Subscribed.................
JB Weld is better. The Gorilla epoxy that you used will break down after getting heated up.
Can you run a engine with nitrocellulose?
Would be an interesting engineering challenge to be sure. You'd probably have to use some sort of magazine system like a firearm and it wouldn't run very long, but it could be done I bet.
Maybe if the guncotton was woven into a long string a rope. Condemn be fed certain links section at a time
that sounds pretty cool lol. There'd be little byproduct unlike with conventional fuel. Cylinder stays clean for a while.
I thought of that but with bp
it’s all great except you don’t give us any details on how and where we can get those materials, don’t be selfish share some fun with us too. thks
You should try watching more of his videos. He tells all.
4:40 LMAO
I wonder what ingredient is causing all of the smoke in the explosion part and could you make a smokeless cotton explosive.
Cool ! Lol !
ruclips.net/video/43HLTGomEHI/видео.html
Wild echo there...nice piece of ground, I envy you that.
They gave me six years for doin shit like this. Your videos are sure to impact someones life in a bad way. All for your personal gain.
Hurting no one? No crime and there are PLENTY of "how to's" for worse that this. No way should you get any time because of what you MIGHT do hell, every guy has a c*ck but it doesn't mean we're going to go commit rape. Too many stupid judges, politicians and cops. Then again, do this in city limits and...well you get what you deserve.
Sure some twisted a-hole is always going to hurt someone else, but that's the human race for you
My 9mm works better