Nice video man ..some notes/tips 1:20 you don't control the sensitivity of the capsule from the mixer but the AF OUT (output gain) of the receiver...the sensitivity of the capsule is another parameter (offset) and can be changed on the transmitter (handheld bodypack) or via showlink through workbench. 3:20 you don't need a third switch in order to have workbench or device control from cl ! In split redundant mode, the dante primary network (switch) can also have the workbench 👍plug an ethernet cable from shure control to the primary switch and it works just fine ...dont forget to plug second cat5 cable from primary port of axient to the primary switch....same thing happens in switched mode👍 4:44 the name of the device can conflict when same devices have same "Yamaha name"( 2 RIOs both Y001 or 2 AD4Q named both Y001) If you have one of a kind then all can be named Y001 (followed of course by their actual name ) Cheers 🙋♂️
Nice video man ..some notes/tips
1:20 you don't control the sensitivity of the capsule from the mixer but the AF OUT (output gain) of the receiver...the sensitivity of the capsule is another parameter (offset) and can be changed on the transmitter (handheld bodypack) or via showlink through workbench.
3:20 you don't need a third switch in order to have workbench or device control from cl ! In split redundant mode, the dante primary network (switch) can also have the workbench 👍plug an ethernet cable from shure control to the primary switch and it works just fine ...dont forget to plug second cat5 cable from primary port of axient to the primary switch....same thing happens in switched mode👍
4:44 the name of the device can conflict when same devices have same "Yamaha name"( 2 RIOs both Y001 or 2 AD4Q named both Y001) If you have one of a kind then all can be named Y001 (followed of course by their actual name )
Cheers 🙋♂️
Thank u 4 sharing
where did you order the foam for the drawers?