Match Grade Bedding and Stock Stabilizer for Remington 700 SPS Part 3
HTML-код
- Опубликовано: 13 апр 2016
- Part 3- In an effort to increase the accuracy of my rifle I reinforced the fore end to allow free floating the barrel. This video shows my experience using Match Grade Synthetic Stock Stabilizer on my Remington 700 SPS Stock. The rifle is chambered in .270 WSM.
Развлечения
![[VIDEO 2] BEDDING A RIFLE WITH ROBERT GRADOUS](http://i.ytimg.com/vi/NoLimDL_e0Y/mqdefault.jpg)
![[VIDEO 2] BEDDING A RIFLE WITH ROBERT GRADOUS](/img/tr.png)
I'm really looking forward to seeing your bedding video. My stock is just like this, so I'll feel more comfortable doing mine after I watch you do yours.
Great video! Can't wait for the next series.
Like trying to fill ice cube trays evenly. I like how you do everything. I've learned a lot. If I do mine, I will follow many of your methods. I have a model 700 BDL, which is supposed to be a Better Deluxe model. I'm not sure which type of plastic, since they call it a composite. Anyways, I've spent my life in the construction industry and watched many, many very large concrete pours. To eliminate air pockets and bubbles in concrete, a vibrating head on a flexible cable is lowered into the concrete and the vibration causes all of the air bubbles to rise to the top. If I use the method you are demonstrating, I think I will rubber band my two electric toothbrushes to the bottom of the stock. That should vibrate all of the bubbles and air pockets out of the stabilizer. I have also watched videos where the bedding compound was run the entire length of the stock with layers of tape built up to 60 thousands of an inch on the bottom of the barrel. Then the rifle was reassembled, squeezing out the excess compound. After the compound was hardened, the tape was removed and you had a free-floating barrel with zero cavities beneath...... Well, as River said at the end of Serenity, "That's the plan."
I have done this procedure to several synthetic rifle stocks. Stability was greatly improved. I also put a stainless washer between the stock and front action screw for free floating and used JB KWIK in the recoil lug well. I used a very thin coat of grease on the recoil lug installed the action on the stock and let it sit over night.
Did the grease help with the come out really easy?
You did a great job Idk why they disliked it. Probably some douches
I have done much the same thing with my Savage rifles except I cut the cross webs and insert 1/4" dis. drill rods one on both sides from the recoil lug to the front of the stock.
Excellent videos. I'm waiting your bedding videos ;-) I'm planning to do the same job with my sps Varmint .308
+clicboumboum Thank you for watching! I'll be working on the bedding soon.
It would be nice to know how it turned out! After actually bedding the action.
Vibrations of an orbital sander a top of a steel rod may help draw the bubbles up, idk for sure
Did you end up recording the bedding process? I've just been through your 3 stabilizing videos and was hoping to see the rest of the project.
If you'll take a drinking straw and put in screw hole leaving it up so epoxy won't go into hole you can set everything down in stock and you bed all at once. Don't forget car wax to release everything.
cutting slots in the centre web would help. so what was the result? did you find flex in around the action area? so compound shrunk so did it draw the sides in to barrel channel?
How did you go with the bedding? I'm doing my Tikka synthetic at the moment, done the stabilizing and started grinding out the rear tang area.
My rifle definitely shoots more accurately now that I have completed the stock stabilizing and bedding. I have only had it to the range once, but so far very happy with the results.
How much weight did this add? Do you feel its too heavy to carry in a hunting application?
Yes, that would help a lot to know before doing this. @DarkTrace Did you get a chance to weigh it... before and after?
Yes I would like to know this also
I never seen you out the action and barrel in so it can imprint
When is part 4??
How much material was needed to fill it up?
Why not just shim points with plastic to free float it? Just curious?
Why not bed the barrel lug slot too?
This video was of the match grade stock stabilizer, which increases the strength of the forend. The recoil lug is bedded using a different compound in a different step.
I think I would just buy an aftermarket stock. All this money and effort and still just have a sps junk stock
I get that but sometimes it’s more fun for some of us to have things to tinker with.
Didnt like how loose the compound was and nothing in the lug hole! What!!!!
Hate those plastic stocks have boyds on the two guns that had them on them
Bubble town USA.....