Jeep liberty 08-12 Window Motor Regulator Removal
HTML-код
- Опубликовано: 7 июл 2017
- 2008- Jeep liberty Window Motor Regulator Removal
Disclaimer:
This video is not meant to be a definitive how to.Always consult a professional repair manual before starting your repair.I am not responsible for any problems that you might incur by watching or following this video.Follow at your own risk Авто/Мото
Thank you so much with out your video I would have never been able to do this on my own
Very helpful thank you.awsome step by step 👍🏼
Thank you for this video!
Good video ! Very involved just to change electric door lock, UGH, Thanks Jayme
okay suggestions on how to lower the window with bad regulator
LOL You sounded fed up at the end :-D
You should have said "Thats all there is?" with a pitch rise on "there is" lol, almost like you wanted more :-D.
It was quite a bit of work on that one.
Do you have a video of putting this back together? I'm curious to know how the white bracket gets back on the the window.
TheBM3ish play it in reverse lol
I cut hole in the black panel so I could get my fingers in-about 3” down &. 1” across just behind the white bracket
Actually at that point you were only about 50% done to get in that regulator and motor off of that panel
Nightmare