Hello sir, I'm still trying to get caught up on all of your video's. I don't want to go too fast though, I want to relax and enjoy. Your ability to take plywood and make it into something beautiful is amazing!! That is exactly what I have been looking for for my drill press! I bought some 1/2" plastic, (the type they make cutting boards from), but I love the look of yours. You have made my evening and the gears in my mind are spinning. Thank you again for another superb video/build.
Hello Thank you for my wonderful comments Your comments will enrich my woodworking life! According to your point of view my woodworking policy is financially thinking about building. The basic material to buy is cheap plywood! You also noticed my concept, I am surprised! I apologize for the words of your gratitude. Thank you See you again
Great video, i like that you made the insert completely square with sharp corners, other videos make them round but I think this is more efficient when your working and quickly need to cut a new insert.
Hello, Thank you for a good comment And thank you for enjoying my video The same idea as you, I made several squares of the same size with a table saw. I exchanged one by today's work. It should be easy to replace. Thank you See you again
こんばんは！今回のビデオからも沢山のヒントを頂きましてありがとうございました。 Boa noite! Obrigado por me dar muitas dicas neste vídeo. Good evening! Thank you for the many tips from this video. 問題を解決する力こそ真の力ですね。 O poder de resolver o problema é o verdadeiro poder. The power to solve the problem is the true power.
Bom dia yoji Obrigado por assistir meu vídeo e comentar todas as vezes. Ficarei feliz com seu comentário Obrigado pela placa superior Vejo você de novo
Hello,Koulou Thank you for watching my video And thank you for the wonderful comments I am an old man who enjoys woodworking and video making every week. Thank you See you
@@QUERBEET-DIES-UND-DAS I know, but i never saw one with that specific profile. I've used all kinds of those tracks (incra, aweso, ujk), but their flat bottom design always prevent the nut from sliding freely when they get filled with even small amounts of dust. With those one used in the build it probably takes much longer.
I've looked at the video again - you're right, the "T" is more of a "W" - I do not know that either! Thanks for your message, I had completely overlooked that. Warm greetings from Germany, from Michael. 🙂🖐
@hulkpeace Hello Thank you for the nice comment This T-track is used for housing It is an aluminum rail for slide doors that are mainstream in Japan. I substituted it upside down. I feel very good and use it. Thank you See you
@@TachiOhyo56 Thank you very much for that information, i've looked up for sliding door rails in my supplier catalogues and found one with the identical profile for installation into parquet. Intrestingly they offer a whole assortment of hardware for shoji doors which is quite uncommon here where i live, usually those vendors just selling din and ec standard hardware.
Hello, Thank you for a good comment And thank you for enjoying my video My wish that you will relax and watch my video. Please love my video from now on Thank you See you again
Bonjour Ro Decost Merci pour le gentil commentaire Comme tu le dis c'est pas cher, c'est pratiquement complet Je l'utilise avec un très bon sentiment. Merci À bientôt
Hello, Thank you for enjoying my video And thank you for the great comment. I want to make a video that you are happy from now on. Thank you See you again
🔴 I love your channel! 🔴 Your ideas and explanations are masterful. Thank you also for this video. 👌 私はあなたのチャンネルが大好きです！ あなたの考えや説明は巧妙です。 このビデオもありがとうございます。🙂👍
Hello. Thank you for watching this time I enjoyed this work under the gentle spring sun. Japanese flowers, beautiful cherry blossoms have begun to fall, Flower life is great! I enjoy woodworking while thinking about such things. Thank you See you
Hola Gracias por el bonito comentario Compré este T-track en mi centro de mejoras para el hogar. Es 1800mm 5 dólares americanos. Es un riel para la puerta corredera de la corriente principal en Japón. Lo usé al revés. Me siento muy bien y lo uso. Gracias Nos vemos de nuevo
Hello, This is barely the second video I've seen of your's and I'm quite impressed. I just recently came across your work for some reason, but glad I did. I subscribed. 👌 👍 This was quality work! Very clever 😉 I loved that you included that slight dilemma, the T-track height and showed how you improvised. Most YT'ers edit their mistakes.
Hello, Eric Thank you for always watching my video And thanks for the wonderful comment My video is not a woodworking education video, my video would be my amateurish woodworking dramatic video. I will continue to improve my skills in woodworking video works. Thank you See you
hello Ohyo56 ! Great job ! You inspire me ! I make your woodworking lathe machine and i am really enjoy it ! Just one question : why do you pu a aluminium corner on the left and not on the right ? Another way Why do you not fix it under like on the right ?
Hello Pascal Thank you for accessing my video Thank you for your praise. Your question made me realize it for the first time! Thank you for teaching me, I am still an amateur (sigh) Thank you for a good weekend See you
Olá Ge Júnior Como vai Obrigado por sempre assistir meus muitos vídeos Gosto muito dessa mesa quando você desistiu. Pode ser usado com segurança. Obrigada Vejo você de novo
Oi Nei Obrigado pelo seu bom comentário Esta tabela de exercícios aparecerá toda vez no meu vídeo! Eu gosto e uso, muito conveniente! Obrigado Vejo você de novo
Hallo, M Vielen Dank, dass Sie sich auch dieses Mal mein Video angesehen haben Ich fühle deine Liebe in deinem einfachen Kommentar. Danke Wir sehen uns wieder
![KSI - Thick Of It (feat. Trippie Redd) [Official Music Video]](http://i.ytimg.com/vi/At8v_Yc044Y/mqdefault.jpg)
![drill press table with a fence & 2 vices in 1 / sliding dovetail rail [woodworking]](/img/1.gif)
Hello sir, I'm still trying to get caught up on all of your video's. I don't want to go too fast though, I want to relax and enjoy. Your ability to take plywood and make it into something beautiful is amazing!! That is exactly what I have been looking for for my drill press! I bought some 1/2" plastic, (the type they make cutting boards from), but I love the look of yours. You have made my evening and the gears in my mind are spinning. Thank you again for another superb video/build.
Hello
Thank you for my wonderful comments
Your comments will enrich my woodworking life!
According to your point of view my woodworking policy is financially thinking about building.
The basic material to buy is cheap plywood!
You also noticed my concept, I am surprised!
I apologize for the words of your gratitude.
Thank you
See you again
Great video, i like that you made the insert completely square with sharp corners, other videos make them round but I think this is more efficient when your working and quickly need to cut a new insert.
Hello,
Thank you for a good comment
And thank you for enjoying my video
The same idea as you,
I made several squares of the same size with a table saw.
I exchanged one by today's work.
It should be easy to replace.
Thank you
See you again
こんばんは！今回のビデオからも沢山のヒントを頂きましてありがとうございました。
Boa noite! Obrigado por me dar muitas dicas neste vídeo.
Good evening! Thank you for the many tips from this video.
問題を解決する力こそ真の力ですね。
O poder de resolver o problema é o verdadeiro poder.
The power to solve the problem is the true power.
Bom dia yoji
Obrigado por assistir meu vídeo e comentar todas as vezes.
Ficarei feliz com seu comentário
Obrigado pela placa superior
Vejo você de novo
Thank you for all your efforts Mr. Ohyo.
A smooth way of communicating.
the idea until photography is unique.
Hello,Koulou
Thank you for watching my video
And thank you for the wonderful comments
I am an old man who enjoys woodworking and video making every week.
Thank you
See you
Une table de perceuse qui vous permettra de travailler bien plus à l'aise et avec plus de précision. Très beau travail. Bravo
Je vous remercie
Comme vous le dites, cette table sécurise mon travail chaque semaine.
Je vous remercie
Trabajos muy limpios y exactos pero sobretodo funcionales felicidades maestro excelentes trabajos gracias
Muy correcto 🙂
Hola
Gracias por el gran comentario
Mi taladro se disfrazará.
Trabajará para mí a partir de mañana
Gracias por ver mi video.
Nos vemos de nuevo
Very nice. I never saw those aluminium tracks, ingenious idea to prevent them from clogging up with dust and whatnot. Thank you for sharing.
These rails are called T-rails. 🙂
@@QUERBEET-DIES-UND-DAS I know, but i never saw one with that specific profile. I've used all kinds of those tracks (incra, aweso, ujk), but their flat bottom design always prevent the nut from sliding freely when they get filled with even small amounts of dust. With those one used in the build it probably takes much longer.
I've looked at the video again - you're right, the "T" is more of a "W" - I do not know that either!
Thanks for your message, I had completely overlooked that.
Warm greetings from Germany,
from Michael. 🙂🖐
@hulkpeace Hello
Thank you for the nice comment
This T-track is used for housing
It is an aluminum rail for slide doors that are mainstream in Japan.
I substituted it upside down.
I feel very good and use it.
Thank you
See you
@@TachiOhyo56 Thank you very much for that information, i've looked up for sliding door rails in my supplier catalogues and found one with the identical profile for installation into parquet. Intrestingly they offer a whole assortment of hardware for shoji doors which is quite uncommon here where i live, usually those vendors just selling din and ec standard hardware.
great build, thanks
Hello Eulayses Perry
Thank you for coming to my workshop
And thank you for your wonderful comments
Gratitude and friendship from Japan
Un upgrade indispensabile, ottimo lavoro. Complimenti per il progetto, lo terrò a mente per il mio trapano a colonna. 💪👍
Ciao, amico
Grazie per il bellissimo commento
L'ho fatto per me stesso.
Grazie per aver apprezzato anche il video
Ci vediamo di nuovo
🙏🏽 Always a pleasure to watch your videos.
Hello,
Thank you for a good comment
And thank you for enjoying my video
My wish that you will relax and watch my video.
Please love my video from now on
Thank you
See you again
sehr schön und guter tisch - ich hab noch vieles das ich mir bei dir anschauen muss - grüße vom federl 👌🤘👍😎💚🍺🖖
Hallo mein Freund Hans
Viel Glück für Sie und Ihre Lieben im Jahr 2021.
Danke aus Japan
Frohes neues Jahr
Yes, a great addition to the drilling machine, you will have to do it yourself!
Hello
Thank you for watching the video
This table is very economical and easy to detach! I like it very much.
Have a good day
Thank you
See you
お疲れ様です🙇
これは、バージョンアップした治具ですね。
今週末、お会い出来るのが、楽しみに、なりました。
お疲れ様です。
これでこのシリーズ完結ですね！？
今回も楽しみまながら
自分なりに満足できるものができました。
ありがとうございました。
Good job 👍
Hello.
Thank you for watching this time
I was able to renew the table.
Superbe et sans doute très pratique. Je vais m’en inspirer pour aménager la mienne. Bravo.
Bonjour Ro Decost
Merci pour le gentil commentaire
Comme tu le dis c'est pas cher, c'est pratiquement complet
Je l'utilise avec un très bon sentiment.
Merci
À bientôt
Beautiful, love watching you work your magic, thank you so much.
Hello,
Thank you for enjoying my video
And thank you for the great comment.
I want to make a video that you are happy from now on.
Thank you
See you again
🔴 I love your channel! 🔴
Your ideas and explanations are masterful.
Thank you also for this video. 👌
私はあなたのチャンネルが大好きです！
あなたの考えや説明は巧妙です。
このビデオもありがとうございます。🙂👍
Hello.
Thank you for watching this time
I enjoyed this work under the gentle spring sun.
Japanese flowers, beautiful cherry blossoms have begun to fall,
Flower life is great!
I enjoy woodworking while thinking about such things.
Thank you
See you
👍🌺
Estupenda la mesa para el taladro. Saludos
Very nice. I like the moving fence. I must buy some T track. Thank you
Hola
Gracias por el bonito comentario
Compré este T-track en mi centro de mejoras para el hogar.
Es 1800mm 5 dólares americanos.
Es un riel para la puerta corredera de la corriente principal en Japón.
Lo usé al revés.
Me siento muy bien y lo uso.
Gracias
Nos vemos de nuevo
@@TachiOhyo56 ,?
Hello, This is barely the second video I've seen of your's and I'm quite impressed. I just recently came across your work for some reason, but glad I did. I subscribed. 👌 👍
This was quality work! Very clever 😉 I loved that you included that slight dilemma, the T-track height and showed how you improvised. Most YT'ers edit their mistakes.
Hello, Eric
Thank you for always watching my video
And thanks for the wonderful comment
My video is not a woodworking education video, my video would be my amateurish woodworking dramatic video.
I will continue to improve my skills in woodworking video works.
Thank you
See you
おつです
またまたバージョンアップ おめでとうございます
どんどんいい感じになりますね
使いやすい最良の同僚が増えますね
（笑）
やっぱり Twitter始めるべきですよ
動画編集もセンスありますが
動画だけじゃなく
画像で見てみたいですよ――――
いい作品に 普段使いの道具ってオーラ―があるんですよ
動画にない画像から出るオーラが
自分は写真撮りだったからもしれませんが そう思ってます
もっとファンが増えます！！
（笑）
いっぱちさんこんばんは
いつも素敵なコメントありがとう
これでボール盤が使いやすくなりました。
そうですか写真に詳しい方ですか、私はまだまだ勉強不足です。
Twitterやってみようかなー
近いうちにログインしてみます。何をどうすればいいのか分かりませんが・・・・
great job........like you always do
Hello,
Thank you for a good comment
And thank you for enjoying my video
My wish is to relax and watch my video.
Thank you
See you again
Muy buen vídeo me gusto mucho
Hola
Muchas gracias por sus maravillosos comentarios cada vez.
Esto completa la taladradora.
Otro placer ha aumentado.
Gracias
Nos vemos de nuevo
hello Ohyo56 !
Great job !
You inspire me ! I make your woodworking lathe machine and i am really enjoy it !
Just one question : why do you pu a aluminium corner on the left and not on the right ? Another way Why do you not fix it under like on the right ?
Hello Pascal
Thank you for accessing my video
Thank you for your praise.
Your question made me realize it for the first time!
Thank you for teaching me, I am still an amateur (sigh)
Thank you for a good weekend
See you
MUITO BOM COMO SEMPRE.
oi lá
Obrigado por um bom comentário
Eu também estou muito feliz.
Quando é bom usar isso todas as vezes.
Obrigado
Vejo você de novo
God work 👍👍👍
Hello,
Thank you for watching my video
And thank you for praise
We will continue to work to improve our skills
Thank you
See you again
Muito bom. Parabéns
Olá Ge Júnior
Como vai
Obrigado por sempre assistir meus muitos vídeos
Gosto muito dessa mesa quando você desistiu.
Pode ser usado com segurança.
Obrigada
Vejo você de novo
Buen trabajo..!....👏👏👏👏 ....🇵🇪
Hola jorge
Gracias por mirar siempre mi video y dar buenos comentarios.
¡Estaba absorto en la carpintería de las vacaciones de ayer!
Gracias
Nos vemos
Merecido like maestro!!!
Hola juan
Gracias por ver siempre mi video
Gracias por su maravilloso comentario de alabanza.
Subarashi 😱😱😱👍🏼👍🏼👍🏼
Ti sono grato.
ariosto
Muito muito bom
Oi Nei
Obrigado pelo seu bom comentário
Esta tabela de exercícios aparecerá toda vez no meu vídeo!
Eu gosto e uso, muito conveniente!
Obrigado
Vejo você de novo
ボール盤の購入を考えていますが、リョービがオススメですか？マキタは？
選ぶ基準は何ですか。初心者ですので教えてください。
こんばんは
私の思いはDIY初心者であればリョービのこのタイプはおすすめです。４〜５年使ったらランクアップする、私は自分のレベルに合わせて道具もグレードアップしてます。それが何回も幸せを味わえます。経済的に余裕があるのなら『安物買いの銭失い』を避けられるでしょう
Total perfekt👍👍👍👍👍😊
Hello
Thank you always
This table appears in my project every week.
And help me.
Thank you
See you
sehr schön ⭐️⭐️⭐️⭐️⭐️😁🇦🇹
Hallo, M
Vielen Dank, dass Sie sich auch dieses Mal mein Video angesehen haben
Ich fühle deine Liebe in deinem einfachen Kommentar.
Danke
Wir sehen uns wieder
大変ご無沙汰しておりますm(>_<
実は急な人事異動で引っ越しやら転属によるバタバタなどでなかなかコメントもお送りする余裕もなく、ご心配をおかけしました(´;ω;`)
RUclipsを観る余裕もないので、木工も今はストップしております(´;ω;`)
が、やはり一度木工趣味を志した者として、ohyoさんの動画に刺激を受け、ただ今スピーカー作成中です( ^ω^ )
仕事終わりに少しずつなので遅々として進んでおりませんが、完成した暁には今まで作成した数種のご紹介も兼ねて動画を作成するつもりです(･∀･)
今後も素敵な動画UPを楽しみにしております(*´ω`*)
こんばんは
春先の会社員は何かとありますね！
私の様に自営なら勝手にやれば良いですが・・・・
スピーカー作りはお楽しみですね〜
私は二度とスピーカー作りの動画はアップしません！！
この世界はマニアが凄すぎて・・・・
PFS001213さんのスピーカーの完成楽しみにしています。
Sizes please
Hello Banavage
Thank you for watching my video.
Most of my work is my whims and adventures. There is no blueprint, please really excuse me. Tachi
Hallo,
Haben Sie schon mal einen unauffällige Box gebaut?
Wenn ja bitte schicken Sie mir den link
Hallo,
Dies ist eine der Boxen, die ich gemacht habe.
ruclips.net/video/DRq6x2KHM-g/видео.html
ruclips.net/video/QztDPKGBCI0/видео.html
@@TachiOhyo56
ruclips.net/video/lZuCiLmEOWo/видео.html
Ich meinte das
What's the name of this song?
Hello Edson
Thank you for coming to my workshop
BGM "RUclips Audio Library"
Sugar Pines .Avocado Street by Wes Hutchinson
@@TachiOhyo56 Thank you very much
こんにちは。テーブルのアップグレードですね！名前は分かりませんが、あのレールに取り付けられた物を使ってドリルで削る物をより固定できるということなのでしょうか？
こちらはもうすぐイースター休暇です。私はちょっと先取りで今日から休暇をスタートしまして、のんびりOhyoさんの新作を鑑賞しています笑
こんばんは。
日本も長い長いゴールデン何とやらが来ます、今年は１０日だそうです。
私はそんなに休んだら仕事に復帰できません！！
グルクンさんはリラックスタイムですか、
私のビデオ楽しんでくれて本当に有り難う
楽しく有意義な連休にしてください。
ではまた・・・
グルクンさんの質問に答えていませんでした。
「レールに取り付けたクランプを使ってドリルで削る物をより固定できるということなのでしょうか？」
その通りです。このドリルは日本語で卓上ボール盤と言います、こう見えてトルクがあります。
裁量を固定していないとドリルと一緒に材が回転したりとても危険です！
一見そうは見えないから、つい手袋したまま使ったりします、手袋ごと巻き込まれる恐れがあります。
これをやると皆さんからお叱りを受けます！
私の怪我を心配してくれますありがたいことです。
そんなわけでこれからは万全を期して行なっていきます。
ご丁寧にありがとうございます！そうですか、そんなにパワーがあるんですね。
ＤＩＹについては全くの未知なのでいつも新たなことが学べて面白いです。
私は自分の全く知らない分野の方とお話したりするのが好きなので(^^;
👌✊👍
Спасибо за просмотр видео👌✊👍
やあ、 目立たない箱を作ったことがありますか？ もしそうなら、私にリンクを送ってください
Hallo,
私の作った箱の一つです。
ruclips.net/video/kXL2-Vbg4Zo/видео.html
ruclips.net/video/2WBYIlr7pKI/видео.html
用過的都會發現很不實用 靠山那麼高 搖臂時常檔著 我把3支搖臂拆剩1支了 操作上也不方便 我發現你的視頻 製作精緻 但大都雞肋不實用
您好
感謝您觀看此視頻
謝謝你的評論
我非常喜歡這張桌子。
謝謝啦
再見