This press has worked like a charm for my projects ruclips.net/user/postUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!
This is a valuable addition to my woodwork collection ruclips.net/user/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.
А мне понравилось. Очень уважаю щепетильных до мелочей и тонкостей мастеров. Можно, конечно же и из соплей и палок что то строить, но, всё же гораздо приятнее посмотреть, когда мастер подготовил материал (и не обязательно с помойки или пункта приёмки), а потом сотворил свой шедевр. Жирный лайк!!!
Wow, hello. This second video leaves me ADMIRED by the quality of your realization, they are masterpieces. And also on my hunger, for a neophyte like me, on the products you use, for example at minute 5:11. Of course you don't have to reveal all your manufacturing secrets, I understand. I can only applaud the quality of your work. Thank you for sharing. Sincerely. Etienne ------ Waouh, bonjour. Cette deuxième vidéo me laisse ADMIRATIF par la qualité de votre réalisation, ce sont des chefs d'oeuvre. Et également sur ma faim, pour un néophyte comme moi, sur les produits que vous employez, par exemple à la minute 5:11. Bien sur vous n'avez pas à dévoiler tous vos secrets de fabrication, je le comprend. Je ne peux qu'applaudir sur la qualité de votre travail. Merci pour ce partage. Cordialement. Etienne
It gives me bad memories to see that you’re not wearing proper eye protection while using a pneumatic nailer! In my middle age days, we went camping a lot with our children, well anyway this young father of four who was a carpet installer stopped going camping with us because he got fired due to a staple injury (guess where & why). I myself had 2 strikes (close calls) & subsequent numerous foul balls (was religiously wearing eye protection). Keep up the excellent craftsmanship & eyes!
Great project! Love how you always add some nice trim. Just because you're the only one seeing it doesn't mean it has to look like crap. You're like the old craftsmen, even their jigs looked good.
I was stolen and all my equipment was stolen. Can you help me with some donations, not money in equipment, and even if it is idle and has no value, I can fix it and be glad to help me
I was stolen and all my equipment was stolen. Can you help me with some donations, not money in equipment, and even if it is idle and has no value, I can fix it and be glad to help me
Respect for the lot of work, a super drilling table. A little note, put a round disc under the drilling circle as a sacrificial piece of wood. Then you only need to keep turning and always have a clean base. LG handicraft grandpa.
А это и не мастерская, а съёмная площадка для видосов. Конечно работа, сама по себе прекрасная. У меня рядом немецкая столярка, и там делают отличные вещи, но полный ,,рабочий кавардак,, хотя всем известна немецкая аккуратность.
I was stolen and all my equipment was stolen. Can you help me with some donations, not money in equipment, and even if it is idle and has no value, I can fix it and be glad to help me
This is one of, if not the best example of a D.P.T. that I have seen, and I have looked at a lot to see what I am going to build for myself. Thank you for some great, and yet simple solutions to this build.
Mr. Vereshchak, you are a true craftsman who takes pride in everything you make. Even the jigs are a work to behold. You make everyone who love woodworking want to be a better craftsman. I know you make me want to be a better woodworker. Thank you for sharing these videos with all of us.
Really enjoy your videos Mr Vereshchak. You are a great craftsman. That has to be one of the best drill table tops I have ever seen - very functional and cleverly thought out.
I was stolen and all my equipment was stolen. Can you help me with some donations, not money in equipment, and even if it is idle and has no value, I can fix it and be glad to help me
You are a master, not only in wood craftsmanship. Your videos are equally done well. I like the music and the way you are using it as dramatical intensifier. Its a double pleasure to view your videos. Thank you!
Où achetez vous tous les rails, boulons, vis etc..... ? entre celle là et la table pour la défonceuse, vous donnez envie de les refaire. Merci pour vos partages. J'adore votre travail de finition
It should be noted that if you don't level the top with epoxy and gravity, the edging better be joined and also all that sanding will make the top not as flat as it can unless you are super careful about sanding evenly. Also, after your glue-up of the 2 sheets of 3/4 inch plywood, there is a chance the table will curve up or down. Since my drill press stock metal base is small, I planed a 2x4 and checked with a trusted straight edge from Fulton. I put that inset as far as I could, underneath from left to right. I counter sunk about 15 pan head screws, which were counter sunk with a forstner bit. I did not glue it in case I needed to make a change. I rounder the edges to my liking. There are a lot of gotcha with these. One would be if your table saw is not dead 90 degrees, your edging will not miter properly. I bet I have $250.00 + with the wood, screws, fence, t-track formica, and router bits. Along with a vix bit for the screws and also the brass threaded inserts and thumb screws. Also a plug cutter for plug cutter for the edging screw holes. I did not want to nail it because I wanted the edging to also help with warping as I live near water. There are 20 or 30 details that needed to be thought out, if you've never done this before. I have a few months into it, working a few short days per week. As for the replaceable cut out, I will be adding flat topped leveling screws to accommodate inaccurate plywood sizes. Also, my table has formica and my inserts will be bare plywood, maybe with some light finish. So getting that depth cut right will take a moment to think it out. That's another reason I want the leveling screws under the insert. I'm still trying to figure out if I want a 4x4 square or about that size round. I think square is better because it's easier to crank out inserts accurately on the table saw. Personally, I'd like the ruler to be adjustable. I still have to work out the press' hight adjuster issue hitting. I'll probably use a 90 degree drill adapter and some rods and a new handle in the front on that 2x4 support. Making a drawer box underneath is really not a bad idea. I don't have that figure out yet. Hope this helps someone.
Very nice project, very nicely finished. Very pleasing to watch. One day your daughter will understand how well you made things. Best regards from Switzerland, Rob
That is one awesome drill press table! Outstanding job and with all the bells and whistles! That is way outside my poor budget. Thanks for the great video!
Здравствуйте. Крутая работа. А можете подсказать про упор параллельный с выграверованной линейкой. Не могу в сети такой найти. Всё, что предлагают это без шкалы линейной. И про линейки которые вклеивали непосредственно в столешницу.
Да, отличная работа. Мужик постарался, главное окуратность точность предусмотрительный и безовсяких сложностий. Видимо знает свое дело. Спасибо что поделился со всеми 👍👍👍
So impressed! Only thing I would add would be some leveling screws for the center insert. But that's only because I saw someone else do it. I love how you sand the T-track. That looks so good! Making one now and because of this video I might need a few changes. Can you comment on the fence pieces you used and sources?
Sehr schöne Projekte mit sehr schönen Ideen. Mir fehlt leider nur eine Material Aufstellung von den verwendeten Materialien incl. Bezugsquellen zb. bei Amazon, und Werkzeugen. Das würde für Interessierte Zuseher bestimmt einiges an interessante Anregungen bedeuten und bestimmt auch einige zum Nachmachen anregen. Aber ein ganz dickes lob für die Handwerksarbeit und Ideen....
Compliments!!! Great beautiful job, practical and very, very beautiful also aesthetically .... Great! Potresti dare le indicazioni dei materiali usati e del prodotto passato sopra al piano di lavoro, è una resina? O che altro? Come funziona? Hai dei link dove poter acquistarla? 176/5000 Could you give the indications of the materials used and the product passed over the worktop, is it a resin? Or what else? How does it work? Do you have links where you can buy it?
Toller schlichter Tisch. Frage mich, wo es die Alu-Schiene mit Maßeinheiten gibt. Würde sie sofort kaufen und den Bau beginnen. Vielleicht gibt jemand mal einen Tipp Gruß Rudi - Aachen - Deutschland
Wow, you do very professional looking work. True craftsmanship. I am just starting out in wood working. I now have a gold standard to strive for in my work. Thanks for sharing.
It looks like a really nice design. Adding either dialog or text to to the video to explain what you're doing, and why you're doing it, would add to your excellent video and editing. Thanks for sharing!
great video. not sure if you will see this message but where did you get the fence with the numbers etched onto it? if you or anyone else has a link to it i would be very greatful.
Thanks!. I'm familiar with with the Incra T-Track with ruler. I was inquiring about the engraved "8020" extrusion that you're using for a fence, shown up close at 18 min 7 seconds into the video. I've not seen that before.
I greet you, I wanted to ask you where I should get the aluminum profile you use for the stand drill, please send me a link to purchase that aluminum profile thank you for your response and for sending the link
немного не ясно область применения.. для сверления по шаблону нескольких деталей. это приходит в голову, а что ещё? без разметки то всё равно не будешь сверлить если что-то штучное и в плоскости, тогда не совсем понятно зачем столько линеек. можно ли, к примеру, взять брусок и с шагом в 14 см насверлить дырок и таких брусков 40 шт. в данном варианте исполнения. можете просветить какие варианты применения?
![⚡[DIY] Just the perfect drill press table / woodworking](http://i.ytimg.com/vi/zBrgcXnROHQ/mqdefault.jpg)
![⚡[DIY] Just the perfect drill press table / woodworking](/img/tr.png)
This press has worked like a charm for my projects ruclips.net/user/postUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!
This is a valuable addition to my woodwork collection ruclips.net/user/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.
А мне понравилось. Очень уважаю щепетильных до мелочей и тонкостей мастеров. Можно, конечно же и из соплей и палок что то строить, но, всё же гораздо приятнее посмотреть, когда мастер подготовил материал (и не обязательно с помойки или пункта приёмки), а потом сотворил свой шедевр. Жирный лайк!!!
Wow, hello. This second video leaves me ADMIRED by the quality of your realization, they are masterpieces. And also on my hunger, for a neophyte like me, on the products you use, for example at minute 5:11. Of course you don't have to reveal all your manufacturing secrets, I understand. I can only applaud the quality of your work. Thank you for sharing. Sincerely. Etienne ------
Waouh, bonjour. Cette deuxième vidéo me laisse ADMIRATIF par la qualité de votre réalisation, ce sont des chefs d'oeuvre. Et également sur ma faim, pour un néophyte comme moi, sur les produits que vous employez, par exemple à la minute 5:11. Bien sur vous n'avez pas à dévoiler tous vos secrets de fabrication, je le comprend. Je ne peux qu'applaudir sur la qualité de votre travail. Merci pour ce partage. Cordialement. Etienne
Design, craftsmanship, functionality, measuring tapes, and strong durable finish. Checks all my boxes.
What a cute helper. Wave hello from Lancaster Ohio for me dad!
It gives me bad memories to see that you’re not wearing proper eye protection while using a pneumatic nailer! In my middle age days, we went camping a lot with our children, well anyway this young father of four who was a carpet installer stopped going camping with us because he got fired due to a staple injury (guess where & why). I myself had 2 strikes (close calls) & subsequent numerous foul balls (was religiously wearing eye protection). Keep up the excellent craftsmanship & eyes!
Great project! Love how you always add some nice trim. Just because you're the only one seeing it doesn't mean it has to look like crap. You're like the old craftsmen, even their jigs looked good.
Thank you) with good tools working is nicely 😊
I was stolen and all my equipment was stolen. Can you help me with some donations, not money in equipment, and even if it is idle and has no value, I can fix it and be glad to help me
One of the best drill press tables that I've ever seen...I'll be building this for myself, thanks for the idea!
I was stolen and all my equipment was stolen. Can you help me with some donations, not money in equipment, and even if it is idle and has no value, I can fix it and be glad to help me
Respect for the lot of work, a super drilling table.
A little note, put a round disc under the drilling circle as a sacrificial piece of wood. Then you only need to keep turning and always have a clean base. LG handicraft grandpa.
THE most serious drill press table I've seen so far 👏👏👏
Thank you!)
Красавчик. Получает кайф от работы. Все чисто!!!
Это не мастерская ... это прям музей какой-то (в хорошем смысле) !!! Шикарная работа !!
А это и не мастерская, а съёмная площадка для видосов. Конечно работа, сама по себе прекрасная. У меня рядом немецкая столярка, и там делают отличные вещи, но полный ,,рабочий кавардак,, хотя всем известна немецкая аккуратность.
I was stolen and all my equipment was stolen. Can you help me with some donations, not money in equipment, and even if it is idle and has no value, I can fix it and be glad to help me
This is a master piece work !! Bravo !!! very nice .
Чудова робота!!! Результат просто вражає!!! 👍👍👍
Дуже дякую!☺️
I can only repeat the many admiring comments. You are a beacon to aspire to. Thanks for sharing. Regards, Willie .
Thank you! 😊
Brawo !!! Brawo !!! Brawo !!! Świetna robota, bardzo miło się Ciebie ogląda, zachęca mnie to do działania i kreatywności. Pozdrowienia z Polski.
Dziękuję bardzo 😊
This is one of, if not the best example of a D.P.T. that I have seen, and I have looked at a lot to see what I am going to build for myself. Thank you for some great, and yet simple solutions to this build.
Thank you)
Outstanding and a nice finishing touch project......10/10
Thanks a lot ☺️
Esta mesa se ha merecido una suscripcion, ya estoy con vosotros
Mr. Vereshchak, you are a true craftsman who takes pride in everything you make. Even the jigs are a work to behold. You make everyone who love woodworking want to be a better craftsman. I know you make me want to be a better woodworker. Thank you for sharing these videos with all of us.
Thanks a lot!!!
So precise and cleverly done....Artist.
Thanks a lot!
Really great job, sir. Fantastic idea and nice realization.
Thank a lot)
Versatile, Functional, and superb finishing. Very impressive!
Thank you)
Nice job. Impeccable craftsmanship.
need no words, magnificent work.
Flawless craftmanship with beautiful finished details. True passionate dedication!
Wow, thanks a lot ☺️
Woooow Gran trabajo!!!😮 😱😎👏👏👏👏👏
Really enjoy your videos Mr Vereshchak. You are a great craftsman. That has to be one of the best drill table tops I have ever seen - very functional and cleverly thought out.
Відкрив відео на секунду... залип на 20 хвилин XDD)) Чудова робота!
Дякую!
Gyrya! The most used tool by woodworkers! Love it!
thanks))
Looking at your video I was amazed from start to finish. Your drill press table is wonderful.
Thanks))
Beautiful work. A very functional and well built Drill Press Table.
Thanks a lot 😊
@@mr.vereshchak Posted a link to your build thepatriotwoodworker.com/forums/topic/32902-good-drill-press-build-video/
Muy buena mesa y muy completa intentare hacer una igual, muy buen trabajo, un saludo desde Madrid (España)
Thank you 🙏🏻
The drill press table to rule them all!
Well done! This is beautiful and functional!
Thank you))
I was stolen and all my equipment was stolen. Can you help me with some donations, not money in equipment, and even if it is idle and has no value, I can fix it and be glad to help me
You are a master, not only in wood craftsmanship. Your videos are equally done well. I like the music and the way you are using it as dramatical intensifier. Its a double pleasure to view your videos. Thank you!
Thanks 😊🙂
Hi thanks 4 the vid very impressed I think I will have a go with my drill 👍🏻♥️
One word only PERFECT 👍
Thanks)
Very Nice. I really like the large table. Plenty of room
Où achetez vous tous les rails, boulons, vis etc..... ? entre celle là et la table pour la défonceuse, vous donnez envie de les refaire. Merci pour vos partages. J'adore votre travail de finition
It should be noted that if you don't level the top with epoxy and gravity, the edging better be joined and also all that sanding will make the top not as flat as it can unless you are super careful about sanding evenly. Also, after your glue-up of the 2 sheets of 3/4 inch plywood, there is a chance the table will curve up or down. Since my drill press stock metal base is small, I planed a 2x4 and checked with a trusted straight edge from Fulton. I put that inset as far as I could, underneath from left to right. I counter sunk about 15 pan head screws, which were counter sunk with a forstner bit. I did not glue it in case I needed to make a change. I rounder the edges to my liking. There are a lot of gotcha with these. One would be if your table saw is not dead 90 degrees, your edging will not miter properly. I bet I have $250.00 + with the wood, screws, fence, t-track formica, and router bits. Along with a vix bit for the screws and also the brass threaded inserts and thumb screws. Also a plug cutter for plug cutter for the edging screw holes. I did not want to nail it because I wanted the edging to also help with warping as I live near water. There are 20 or 30 details that needed to be thought out, if you've never done this before. I have a few months into it, working a few short days per week. As for the replaceable cut out, I will be adding flat topped leveling screws to accommodate inaccurate plywood sizes. Also, my table has formica and my inserts will be bare plywood, maybe with some light finish. So getting that depth cut right will take a moment to think it out. That's another reason I want the leveling screws under the insert. I'm still trying to figure out if I want a 4x4 square or about that size round. I think square is better because it's easier to crank out inserts accurately on the table saw. Personally, I'd like the ruler to be adjustable. I still have to work out the press' hight adjuster issue hitting. I'll probably use a 90 degree drill adapter and some rods and a new handle in the front on that 2x4 support. Making a drawer box underneath is really not a bad idea. I don't have that figure out yet. Hope this helps someone.
Nice job...like all your builds
Thanks for watching ☺️
Very nice project, very nicely finished. Very pleasing to watch. One day your daughter will understand how well you made things. Best regards from Switzerland, Rob
Thanks!)
That is one awesome drill press table! Outstanding job and with all the bells and whistles! That is way outside my poor budget. Thanks for the great video!
Здравствуйте. Крутая работа. А можете подсказать про упор параллельный с выграверованной линейкой. Не могу в сети такой найти. Всё, что предлагают это без шкалы линейной. И про линейки которые вклеивали непосредственно в столешницу.
I like the edge banding, great idea.
Пацан молоток. Наблюдаю за его работой с самого начала👍
Взял на заметку распиловочный стол
тоже понаблюдаю.
но вот со сверлильным столом нифига не понял к чему было столько работы
Very very good idea the disposable center !! bravo
Круто, нет слов! Ещё очень интересно количество часов, затраченных на работу.
Sensacional trabajo!!! Gracias por subir tus vídeos.
Saludos desde España...
gracias ☺️
Great woodworking and kettlebells 👍😎💪
Eine perfekte Arbeit-TOP ⭐⭐⭐⭐⭐👍
Да, отличная работа. Мужик постарался, главное окуратность точность предусмотрительный и безовсяких сложностий. Видимо знает свое дело. Спасибо что поделился со всеми 👍👍👍
Simply stunning work I wish I could obtain 1/10 of your skill and craftsmanship
If I didn't know, I would have thought it was a factory made item.
Awesome craftsmanship!!!
Thank you!!!
Very impressive and well thought out.
Great project. High quality build.
Thank you 😊
I barely have the skill to watch this, much less do it. This is really impressive
Same here... fascinating work.
Superbe travail. Bravo
So impressed! Only thing I would add would be some leveling screws for the center insert. But that's only because I saw someone else do it. I love how you sand the T-track. That looks so good!
Making one now and because of this video I might need a few changes. Can you comment on the fence pieces you used and sources?
Sehr schöne Projekte mit sehr schönen Ideen. Mir fehlt leider nur eine Material Aufstellung von den verwendeten Materialien incl. Bezugsquellen zb. bei Amazon, und Werkzeugen. Das würde für Interessierte Zuseher bestimmt einiges an interessante Anregungen bedeuten und bestimmt auch einige zum Nachmachen anregen. Aber ein ganz dickes lob für die Handwerksarbeit und Ideen....
eso no es una mesa, es una obra de arte, enhorabuena por un maravilloso trabajo
Gracias)
Complimenti!!! Gran bel lavoro, pratico e molto ma molto bello anche esteticamente.... Grande!!
Compliments!!! Great beautiful job, practical and very, very beautiful also aesthetically .... Great!
Potresti dare le indicazioni dei materiali usati e del prodotto passato sopra al piano di lavoro, è una resina? O che altro? Come funziona? Hai dei link dove poter acquistarla?
176/5000
Could you give the indications of the materials used and the product passed over the worktop, is it a resin? Or what else? How does it work? Do you have links where you can buy it?
Hi, it's epoxy resin)
Nicely work, executed very well. But... basically your first drill on your stop block proves me that Mathias Wandel is right about drill press tables.
Very very nice 👍🏼👍🏼👍🏼👍🏼great Job 😜😜
Toller schlichter Tisch. Frage mich, wo es die Alu-Schiene mit Maßeinheiten gibt. Würde sie sofort kaufen und den Bau beginnen. Vielleicht gibt jemand mal einen Tipp
Gruß Rudi - Aachen - Deutschland
Браво! Отличная работа, хорошая идея.
Спасибо!
Wow, you do very professional looking work. True craftsmanship. I am just starting out in wood working. I now have a gold standard to strive for in my work. Thanks for sharing.
Thank you 😊
Well done, I think you just gave me a new project
Klasse Teil! Super gemacht
It looks like a really nice design. Adding either dialog or text to to the video to explain what you're doing, and why you're doing it, would add to your excellent video and editing. Thanks for sharing!
May I ask what you rubbed on the table before you put the branding iron down to prevent the area outside the logo from turning brown?
I wiped the table with a damp cloth to keep the table from burning😊
Damp cloth, so simple. I'm embarrassed it never occurred to me, thank you.
Nice work!! Very talented
Thanks)
great video. not sure if you will see this message but where did you get the fence with the numbers etched onto it? if you or anyone else has a link to it i would be very greatful.
Where is the PS tape with lt to right and rt to lt on the same side purchased. Excellent work!
A other great project, very nice made. Greetings from Norway Koos
Thanks a lot 😊
The ruled T-Track (8020?) at 18:07 looks awesome! Can you post a source URL?
woodworkersworkshop.co.uk/products/incra-track-t-track-plus-metric
Thanks!. I'm familiar with with the Incra T-Track with ruler. I was inquiring about the engraved "8020" extrusion that you're using for a fence, shown up close at 18 min 7 seconds into the video. I've not seen that before.
НЕОПРАВДАННАЯ заморочка,а за трудолюбие-палец вверх!!
Wonderful. Really nice work!!
3:24 Where did you buy the hot stamp
Nice video, bro.. success your channel, from Indonesia😀👍💕
Thanks a lot)
Very nice project.
Where does the t track aluminum profile with the measuring scale come from?
Timecode 13:37
Thank you! I bought it in local building store.
Hi where can I purchase the hold down clamps you used Thankyou loved the drill press table👍
Ho, thanks) bessey track clamps
What ruled T-Track at 18:07 did you use please?
Отличный стол. Хотел спросить,а профиль шириной сколько см?
Truly amazing ... What a creative imagination ...
0
Отличная работа,молодец!👍
I greet you, I wanted to ask you where I should get the aluminum profile you use for the stand drill, please send me a link to purchase that aluminum profile thank you for your response and for sending the link
This is brilliant! Totally unnecessary for my needs but I want one anyway. Thank you for sharing :-)
Thanks a lot!))
C'est un magnifique travail d'orfèvre. Félicitations ...
Merci!!!)
Très joli travail bravo à bientôt salut Jeannot 🛠😉
What drill press is that? Interesting design
Great build, thanks
Awesome project very good attention to details.
Thanks)
Wow, I know you are a great worker but with this video you show to be a great level... Very very good... bravissimo
Thank you!
Всё здорово, красиво, с душой. Один вопрос - зачем направляйка, да ещё с градуировкой, на сверлильном если есть струбцына?
Спасибо. Так быстрее и удобнее перенастраивать, а струбцына для прижима заготовок.
Wow-awesome design and build.
Thank you)
немного не ясно область применения..
для сверления по шаблону нескольких деталей. это приходит в голову, а что ещё? без разметки то всё равно не будешь сверлить если что-то штучное и в плоскости, тогда не совсем понятно зачем столько линеек. можно ли, к примеру, взять брусок и с шагом в 14 см насверлить дырок и таких брусков 40 шт. в данном варианте исполнения.
можете просветить какие варианты применения?
This is a great job there. I like it very much. One question, what kind of stand drill is it? Thanks for the video.
Thanks 😊 It’s Drill Press made Ukraine 1980’s Model -2M112, weight 120 kg
WOW !!! no comment :)
Very good work