How To Replace Outer Tie Rods 07-13 Chevy Silverado
HTML-код
- Опубликовано: 6 сен 2024
- Buy Now!
New Tie Rod Set from 1AAuto.com 1aau.to/ib/1ASF...
New Tie Rod from 1AAuto.com 1aau.to/ia/1AST...
In this video, 1A Auto shows you how to remove, replace, and install a sway bar end link. This video is applicable to the Chevy Silverado and GMC Sierra, model years 07, 08, 09, 10, 11, 12, and 13.
This repair was done on a 2011 Chevrolet Silverado 1500 LT 5.3L and the process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oit/1AX...
• 16mm Wrench
• 21mm Socket
• 22mm Socket 1aau.to/oaa/1AX...
• 7mm Socket 1aau.to/ogZ/1AX...
• Grease Gun
• Needle nose pliers 1aau.to/oa4/1AX...
• Needle nose pliers 1aau.to/oa4/1AX...
• Ratchet 1aau.to/oi8/1AX...
• Torque Wrench 1aau.to/ofa/1AX...
• 15/16 Inch Wrench
• Floor Jack 1aau.to/ocu/1AX...
• Hammer
• Jack Stands 1aau.to/oci/1AX...
Subscribe: / @1aauto
Check out our playlist:
Chevy Silverado 2007-2014 2nd Gen: • Chevy Silverado 2007-2...
Chevy Auto Repair Videos: • Chevy Auto Repair Videos
For More Info visit us at 1aau.to/h/sy/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
You don't know a true mechanic when you see one until you see that back part on under his nail LOL thanks for the video
wheel lugs are torqued to 140 ft-lbs, not 100, 110
How you know when your lug nuts are torqued down is when the impact stops 😅
I cant get the tie rod off what can I do
Does this apply to a 2500HD same year?
Wheel lug nut torque is 140ftlbs, not 100-110 as mentioned at the end of the video.
I ordered the whole 14 piece kit from you guys my outer tie rods ends don't have a grease insert are they possibly self contained?
+James Fox If it did not come with a zerk fitting it was pre-greased and sealed when it was manufactured.
Are the outer tie rods the ones that can cause bad shaking when hitting small bumps in the road, or can both?
+Fuck Puddle This could be just the outers or both outers and inners, this may also not be related to the tie rods as well.
At home most likely on ground under it u don't have to take wheel off
Anyone here in 2023? Using 15/16 wrench just spins the nut with the inner. A 16mm fits a section of the inner to hold, but I don't see you guys do that here?
I have a 2013 Sierra, how long would it take to change out the inner and outer tie rods on both sides?
Did anybody else noticed that he said the torque the castle nut but yet he didn't use the torque wrench
What kind of grease do you use?
Don’t you have to press the outer tie rod down into the knuckle? I tried just using the castle nut to pull the threaded rod down into the knuckle and stripped it out.....
Ok , so it's my outter tire rod. Steering wheel constantly shakes after I changed the tire
What is the torque specs for 2010 traverse tie rods inner and outer?
At this time, we do not have this information available. Try searching online forums. +R3d33mingFir3
Was I seeing things or did this guy not measure the second time from the exact same point he did the first time ?
I think he did in the video
Wow so easy I learned so much from you guys! THANKS
+Bris! ' Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
03:40
Description says outer tie rod but thumbnail says oil pan gasket.
Thanks for checking us out and letting us know! The video appears to show the replacement of the outer tie rod so we will work on having the thumbnail corrected. Thank you and have a great day! +anthony smith
Thank you for this video! Do you know if the inner tie rod has a grease fitting? I was looking around and couldn't see one.
+WILSON! It may be self-contained and might not have a grease fitting on it.
Awesome thanks!
when doing the inner tie rod on this same vehicle what is the trick with removing that boot?? I have the outer clip off but can't figure out how to loosen the large side
There’s a metal clip at the top of it you’ll have to cut it off and then replace the boot with it or you can use another screw type clip for it
His videos are great. educational and very professional but buy the parts you show and did not send me what you buy!
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Kevin Aragón
What causes a loose change sound when driving slow over bumps? I'm driving a 2008 GMC Sierra. It's so hard to pinpoint where exactly underneath the truck the sound is coming from. Sometime it sounds like it's coming from the front and other times from the rear. What happens when the sway bar goes bad, or can it go bad?
I'm thinking it might be the sway bar links. Hopefully you have a video on how to replace these I can use and buy the parts from you.
its the sway bar links clattering. the rubber gets worn so the washers clatter back and forth. easy fix