No more excuses. Never lose your drone again! GPS Drone Tracker app, GPS module, VIFLY GPS Mate (fast GPS lock without powering your drone!). Done! 😀Links to all available above 👍 If using TX16S with EdgeTX, make sure to use main.lua file here bit.ly/TXTX16SEdgeTXMainLuaforGPSTracker to copy to your SD card per video here ruclips.net/video/mqYcgPZe1KE/видео.html . This revised main.lua file for use with EdgeTX on your RadioMaster TX16S (only) keeps the GPS widget from interfering with your TX16S Top Bar display causing it to change colors
For those like me who don't have GPS data displayed on the screen, simply go to page 11 (TELEMETRY), delete all sensors and add new sensors again. It was a fix for me! Short story: I wish I had this fixed a few days ago when I accidentally disarmed the engines and my plane landed in a very large field. I spent an hour or so looking for it until it was too dark to keep it on. After a rainy night I came back determined to do whatever it took to get him back. To my surprise I found it closer than I imagined. I doubt I'd find it 10km away from home position. Now with GPS data screen fixed I'll have a better chance next time! Cheers!
My zorro wont discover any gps rxbat curr sensors ect.But i get all data with OSD DJI goggles.Telemetry is on in configuration tab just cant get the data on Zorro. Any suggestions would be much appreciated.
This works on the Jumper T-lite as well ! very cool :) to enter the telemtery screen (as there is no dedicated button) you need to long press the Down button
Thanks so miuch for the videos!! so helpful, you did leave the part to discover new sensors out of your tx16s video on this same topic so i was so confused lol just had to watch more on channel!
thx! I used this guide a year or so ago when i first got my Zorro, i now fly more long range and have a few different quads but havent REALLY been following my GPS data but i want to do so more and be more proficient with my telemetry. With that said will it "store/track" telemetry info regardless of which quad Im using? or should i create a new model for each one...and if i did then would i need to "discover" the gps for each one? thanks im trying to figure out what the best course of action is ;)
I lost communucation with my drone at 300 ft high on a windy day. The main power must have cut out.Correct me if I'm wrong, but this will not transmit gps co-ordinates to the radio after losing main power because the elrs transmitter and flight controller don't have power? I have my last known co-ordinates but from 300 ft on a windy day in an area of heavy dense brush so it won't help enough. I bought a Ruko r111 for my new drone and I'm hoping that is a better option in a case like I had happen.
great video, i have been using the lua script for some time and it was working great, for some reason when i hit my telemetry button on my radio, it brings up the viewer but no gps shows, if i run the GPSX9L lua script from the system page, its pulling all my gps stats? anyone have any idea what would cause this?
Why default telemetry display with GPS on it can't do the same? I am on OpenTX and have my GPS coordinates still on the screen after my plane power off.
To save a little time on moving the files. After you opened the file locations of both where you want to copy the files. Just simply grab the file and drag it to the other side and release it and it will copy the file over. Looking forward to trying so many of these things when I actually receive the controller which I thought was going to be today. Never hurts to get informed on how everything works before you use the controller for the 1st time.
Great video already had this for my t lite gonna add this to my new zorro now do you think you guys will do a video on the fly me to the moon lua for zorro?
Great video. I tried it with a diy gps sensor based on openxsensor and I'm getting the gps coordinates in the telemetry but it hangs the tx (zorro) when I switch to the telemetry page. The only way to recover is to turn off the tx. Does this only work with telemetry data coming from a flight controller?
Sorry, uncle, I want to ask, I set the wrong data tools, including the elrs express data, please help with the tutorial to download the data again........🙏🏻🙏🏻🙏🏻🙏🏻
Hey , nice video, Finally someone have done it whit zorro. But my question is - what if i want to use MGRS location format? Easyer to read less errors, would it be possible if configuring script file???
Thanks for this. Now that I know this will work in edgetx I think I'm ready to update my tx16s to edgetx. This was the main script I was worried about losing if I made the change,
I hadn't forgotten you wanting to switch to EdgeTX. I had to make sure of this myself first. Read my pinned comment above. If you use EdgeTX on the TX16S and this script you DO need to make a minor change. One of the EdgeTX Dev's modified the main.lua file for it. I've included the link to the modified main.lua file. Use it instead of the original one. The only thing this does is allow the script to work properly with the "Top Bar" widget area of the TX16S. If you use the original main.lua file, the script will interfere with the Top Bar and change it color to something different and not allow you to modify it. If you have any questions, shoot me an email tmac@tmacfpv.com
@@TMacFPV thanks for pointing out the pinned comment and the offer of assistance. Hopefully I can do the update sometime this week. And I've got the literadio2 se as a backup, so I can at least fly my smaller quads if it takes a few trial and errors.
@@TMacFPV By the way, there is a free android app called c:geo used for geocaching. You can input the coordinates of a downed quad into it and it has some great tools for tracking built in. Things like a compass and a directional arrow tool.
@@kurtzFPV Sure thing! Glad you saw my comment. This week I'll work on the EdgeTX video and plan to publish it Friday. It's pretty straightforward though just following EdgeTX instructions on EdgeTX site. Dev's have done a good job with documentation. One of the things I've found "different" about EdgeTX on the TX16S is both the formats of screens and color schemes. Formats I can get used to, however, not all colors (obviously) work well with page screens for readability. Finding out which color to change on what part of the screen has been a bit "annoying" for me, however, I'll try to clarify that somewhat in this upcoming EdgeTX video
anyone can help I can find gps telemetry in tx. Already enable telemetry in configuration but tx only show 10 sensors. I'm using radiomaster boxer elrs
Hiya, did all as you said, got screens on remote okay. Problem is all data blank shown, tried deleting sensors and discover new sensors, but only get 10x? You have over 20x? Any idea why mine wouldn't show under new sensors discovery?
Hi! can't get ti receive GPS Data on the telemetry tab, I only have 10 things. I tried erasing all and adding new, telemetry is on on beta fly, gps is locked, everything is on the last firmware. Help me thanks
Hi! Did you manage to get it done? I tried the same and it shows zeros in my display on the telemstry screen although i see 15+ locked sats in my goggles.
Within the first two minutes of the video (Step #1) I explain there are different versions of the app based on screen size. So, determine what screen size the TBS Mambo has from its User Manual and/or Product Description (I have done this for you =128x64). Since the Mambo's screen size (128x64) is the exact same screen size as the Zorro and TX12 demonstrated in this video (128x64), everything in this video should be exactly the same for your Mambo
Help! Anyone? When I click "discover new" for the sensors, it doesn't find GPS sensors. GPS is working because I can see it in my OSD- home arrow, number of sats, distance, etc. I tried deleting all sensors and doing "discover new" again, it finds the original 10 sensors that it had before, instantly- TX power, RSSI, all that stuff. Any ideas anyone? Either way, brilliant tutorial, very easy to follow 😁
You have to make sure in betaflight that you have enable telemetry(is called smart port or something like this) on the specific UART. Usually it's on UART. You can search more about this.
This video (on the TX16S) was mentioned I believe in the first 30 seconds of the Zorro video ruclips.net/video/mqYcgPZe1KE/видео.html . Sort of makes me wonder 🤔
No more excuses. Never lose your drone again! GPS Drone Tracker app, GPS module, VIFLY GPS Mate (fast GPS lock without powering your drone!). Done! 😀Links to all available above 👍
If using TX16S with EdgeTX, make sure to use main.lua file here bit.ly/TXTX16SEdgeTXMainLuaforGPSTracker to copy to your SD card per video here ruclips.net/video/mqYcgPZe1KE/видео.html . This revised main.lua file for use with EdgeTX on your RadioMaster TX16S (only) keeps the GPS widget from interfering with your TX16S Top Bar display causing it to change colors
youtube is deleting my post here. I wanted to share with you my post in reddit about telemetry dashboard.
I was searching for exactly that information you presented in your video for several ours. Here it is! Thank you so much!
For those like me who don't have GPS data displayed on the screen, simply go to page 11 (TELEMETRY), delete all sensors and add new sensors again. It was a fix for me!
Short story:
I wish I had this fixed a few days ago when I accidentally disarmed the engines and my plane landed in a very large field. I spent an hour or so looking for it until it was too dark to keep it on. After a rainy night I came back determined to do whatever it took to get him back. To my surprise I found it closer than I imagined. I doubt I'd find it 10km away from home position. Now with GPS data screen fixed I'll have a better chance next time!
Cheers!
If I would have watched this video 24hrs ago it would have saved me $600
A++ GREAT video....u just saved me my NEXT $600 😢😂😂
My zorro wont discover any gps rxbat curr sensors ect.But i get all data with OSD DJI goggles.Telemetry is on in configuration tab just cant get the data on Zorro.
Any suggestions would be much appreciated.
This works on the Jumper T-lite as well ! very cool :) to enter the telemtery screen (as there is no dedicated button) you need to long press the Down button
Thank you. I was just wondering about how to get the page up.
Your step by step tutorials are the best I've seen!!
i've said that a few times,
Thank you Jason 🙏 Happy you find them useful 👍
@@TMacFPV I will definitely be using this!
We can use gps telemetry on radiomaster pocket too?
For Jumper T-lite/Elrs users I found the Telemetry ratio 1/32 to work best. (1/64 gives "Sensor lost" alerts every few seconds)
Thanks so miuch for the videos!! so helpful, you did leave the part to discover new sensors out of your tx16s video on this same topic so i was so confused lol just had to watch more on channel!
thx! I used this guide a year or so ago when i first got my Zorro, i now fly more long range and have a few different quads but havent REALLY been following my GPS data but i want to do so more and be more proficient with my telemetry. With that said will it "store/track" telemetry info regardless of which quad Im using? or should i create a new model for each one...and if i did then would i need to "discover" the gps for each one?
thanks im trying to figure out what the best course of action is ;)
Amazing tutorial, thank you !!! Do you happen to know I can find the lua script for the Radiomaster Boxer with EdgeTX?
Radiomaster TX12 - work fine! Grateful a lot!👍
I lost communucation with my drone at 300 ft high on a windy day. The main power must have cut out.Correct me if I'm wrong, but this will not transmit gps co-ordinates to the radio after losing main power because the elrs transmitter and flight controller don't have power? I have my last known co-ordinates but from 300 ft on a windy day in an area of heavy dense brush so it won't help enough. I bought a Ruko r111 for my new drone and I'm hoping that is a better option in a case like I had happen.
VERY cool, thanks for sharing this information.
Probably the best explanation ever!
great video, i have been using the lua script for some time and it was working great, for some reason when i hit my telemetry button on my radio, it brings up the viewer but no gps shows, if i run the GPSX9L lua script from the system page, its pulling all my gps stats? anyone have any idea what would cause this?
Thanks for the vid! Any idea why my model only has 11 pages? I am missing the crucial "screens" page :/ thanksagain!!
Why default telemetry display with GPS on it can't do the same? I am on OpenTX and have my GPS coordinates still on the screen after my plane power off.
Super cool, always top notch instructionals!
This is actually amazing
How bout the Quad side. Do not need to set anything?
To save a little time on moving the files. After you opened the file locations of both where you want to copy the files. Just simply grab the file and drag it to the other side and release it and it will copy the file over. Looking forward to trying so many of these things when I actually receive the controller which I thought was going to be today. Never hurts to get informed on how everything works before you use the controller for the 1st time.
How can i use on my radiomaster pocket? Thanks bro.
Absolutely epic walkthrough. THANKS!
Amazing! Will have to get this installed on my qx7
Great video already had this for my t lite gonna add this to my new zorro now do you think you guys will do a video on the fly me to the moon lua for zorro?
Great video. I tried it with a diy gps sensor based on openxsensor and I'm getting the gps coordinates in the telemetry but it hangs the tx (zorro) when I switch to the telemetry page. The only way to recover is to turn off the tx. Does this only work with telemetry data coming from a flight controller?
Sorry, uncle, I want to ask, I set the wrong data tools, including the elrs express data, please help with the tutorial to download the data again........🙏🏻🙏🏻🙏🏻🙏🏻
Hey , nice video, Finally someone have done it whit zorro. But my question is - what if i want to use MGRS location format? Easyer to read less errors, would it be possible if configuring script file???
Any idea if this will work on the Radiomaster Pocket, and which luascript to install? Cheers again
same as zorro x7/x9 lite, just installed
How does it know your distance from it? I can't figure this out
Wow thats awesome. I will def try this.
Good stuff, I can't figure any this out, Lucky I can fly at all
Thank you .just did it on mine
you're welcome. Happy flying!
Thanks for this. Now that I know this will work in edgetx I think I'm ready to update my tx16s to edgetx. This was the main script I was worried about losing if I made the change,
I hadn't forgotten you wanting to switch to EdgeTX. I had to make sure of this myself first. Read my pinned comment above. If you use EdgeTX on the TX16S and this script you DO need to make a minor change. One of the EdgeTX Dev's modified the main.lua file for it. I've included the link to the modified main.lua file. Use it instead of the original one. The only thing this does is allow the script to work properly with the "Top Bar" widget area of the TX16S. If you use the original main.lua file, the script will interfere with the Top Bar and change it color to something different and not allow you to modify it. If you have any questions, shoot me an email tmac@tmacfpv.com
@@TMacFPV thanks for pointing out the pinned comment and the offer of assistance. Hopefully I can do the update sometime this week. And I've got the literadio2 se as a backup, so I can at least fly my smaller quads if it takes a few trial and errors.
@@TMacFPV By the way, there is a free android app called c:geo used for geocaching. You can input the coordinates of a downed quad into it and it has some great tools for tracking built in. Things like a compass and a directional arrow tool.
@@kurtzFPV Sure thing! Glad you saw my comment. This week I'll work on the EdgeTX video and plan to publish it Friday. It's pretty straightforward though just following EdgeTX instructions on EdgeTX site. Dev's have done a good job with documentation. One of the things I've found "different" about EdgeTX on the TX16S is both the formats of screens and color schemes. Formats I can get used to, however, not all colors (obviously) work well with page screens for readability. Finding out which color to change on what part of the screen has been a bit "annoying" for me, however, I'll try to clarify that somewhat in this upcoming EdgeTX video
@@kurtzFPV that's great! I'll check it out. Thanks Bryan!👍
Excellent video!
Nice one... the info you give helps... Than3
anyone can help I can find gps telemetry in tx. Already enable telemetry in configuration but tx only show 10 sensors. I'm using radiomaster boxer elrs
Welcome I am facing the same problem. Did you solve it?

Welcome I am facing the same problem. Did you solve it?

Very Nice, if the drone is switched off following a crash, the gps data remain displayed on the radio? Thanks
I think it writes a log file. See the last minute or so of the video, click Sys, Tools, GPS Stats X9L, where you can view the log file I think.
@@yonseimatt The best would be to see the GPS coordinates on the display
why can't I find the new sensors in telemetry?
Welcome I am facing the same problem. Did you solve it?

Welcome I am facing the same problem. Did you solve it?

Hiya, did all as you said, got screens on remote okay. Problem is all data blank shown, tried deleting sensors and discover new sensors, but only get 10x? You have over 20x?
Any idea why mine wouldn't show under new sensors discovery?
All good didn't have telemetry tab clicked on, discover new and bamo! Silly me
Welcome I am facing the same problem. Did you solve it?

@@paulr3556did you solve it?
Great and easy thank u Tmac.
Top 👌🏼🚀😍 thanks for this really nice
Hi! can't get ti receive GPS Data on the telemetry tab, I only have 10 things. I tried erasing all and adding new, telemetry is on on beta fly, gps is locked, everything is on the last firmware. Help me thanks
Hi! Did you manage to get it done? I tried the same and it shows zeros in my display on the telemstry screen although i see 15+ locked sats in my goggles.
Best of best
Can i use it in tbs mambo?
Thank you!
Will it work the same on any Edge TX radio?
See time mark 1:10 - 1:21 of the video
Nice tutorial.... I. Loveit
Everything works except when I open gps stats lua I'm getting an syntax error
which one i should use for tbs mambo?
Within the first two minutes of the video (Step #1) I explain there are different versions of the app based on screen size. So, determine what screen size the TBS Mambo has from its User Manual and/or Product Description (I have done this for you =128x64). Since the Mambo's screen size (128x64) is the exact same screen size as the Zorro and TX12 demonstrated in this video (128x64), everything in this video should be exactly the same for your Mambo
Sick! No need for GPS logs
Thank you.
Help! Anyone? When I click "discover new" for the sensors, it doesn't find GPS sensors. GPS is working because I can see it in my OSD- home arrow, number of sats, distance, etc. I tried deleting all sensors and doing "discover new" again, it finds the original 10 sensors that it had before, instantly- TX power, RSSI, all that stuff. Any ideas anyone? Either way, brilliant tutorial, very easy to follow 😁
You have to make sure in betaflight that you have enable telemetry(is called smart port or something like this) on the specific UART. Usually it's on UART. You can search more about this.
@@adelinvaduva7832 Merci. Noroc cu mesajul tau :)
@@dorin8r Oricand ;)
Welcome I am facing the same problem. Did you solve it?

Nice tmac can you make a movie and do. This on Tx16s please
This video (on the TX16S) was mentioned I believe in the first 30 seconds of the Zorro video ruclips.net/video/mqYcgPZe1KE/видео.html . Sort of makes me wonder 🤔
wow!
Wow
Is there an app to get my drone out of a tree?
😲 🪚