Agreed music is bad, natural sounds and voice instructions are best, even if added after the fact in editing. Some people can be self conscience about their own voice, this just doesn't matter as none of us on the web know them. Unless it is a MUSIC video keep the music to a minimum.
I've got the 2019 version of this truck in White and I think you just sold me on the bumper, tires, and lift except I don't want to level it out. Great vid and beautiful truck.
One of the best install vids I’ve seen, love it when someone knows the difference between the bolt size and wrench size! And why don’t people just turn the sound off if they don’t like the music?
@@DavidsYotaOffRoad agreed. just got a '19 and loving it so far. you have any issues with your XM being spotty as hell? mines horrible I can't even listen to satelite radio bc it's just constantly searching for signal. thats literally my only complaint so far.
I really like the understated look of that bumper. I like that it looks like it could be stock. I do have a question though, how hard is it to make that decision to cut up your bumper to do it? I feel like I want a bumper like that or bull bars but I'd hate to have to cut up the truck to do it.
@@DavidsYotaOffRoad hey I know this is two years old but I have a couple questions. Is that a SR5 or TRD? And when you added that bumper did it make you have to swap to a heavier spring? I ordered the hiline and a 65lb winch on stock sr5 coils...
looks great. FYI - you can do this whole job without removing the bumper shroud. Remove the grill and then mark and cut the bumper shroud. The cut shroud gives you enough room to remove the crash bar.
Thanks ! Keep up the good installation videos. Just straight to the point. Not like 90% of the other videos on RUclips with their girlfriends clickbait 🤣
Really appreciate the great video. Considering just cutting an opening in the lower center plastic piece large enough to reach the clips and remove it. Maybe I can avoid having to remove the bumper all together since it can be cut while mounted on truck. Best looking low profile setup 🤘
Wow thats a nice setup. It was hard to watch you cut that bumber cover up but dam it was worth it. Ive been having a hard time resisting the urge to start modding mine. I think ive been working on my Mustangs more to keep from hacking up the truck.
Couple of questions... What type of shaving cream do you use for your legs and arms? You look smooth AF. Secondly; why didn't you paint the raw steel brackets? I would be worried about it rusting and I live in N.calif. And @ 8:30 you should have had a steel spacer made to sandwich between the frame and the nut/bolt. almost all aftermarket bumpers come with them, just not yours.. overall looks great.
Bad as start, dope drift with a dope truck! ... then squirrelly music for pajamas wearing tweens. Close enough to suffer through and I am going to use this vid on mute to install my C4:)
Could you please please please tell me what brand and size tires they are and what size lift you have. I've looking all over you tube for the right look for my 2017 Tacoma and this is it. So nice. Also do you have an inch and a quarter spacers on the that?
This bumper looks like it would interfere with the sensor in the grille on the TRD Pro with adaptive radar cruise control and pre-collision braking. Am I correct in assuming this? Great video BTW, very informative!
Own the same cement pro love it ARB bumpers front and rear with winch 1.25 wheel spacers big k2o tires amazing ride durability and looks mahalo from big Island
1st thing to do pull off plastic molding across front end that toyota calls a bumper throw it in the trash get a fabricated real steel bumper mount on front end then proceed to install winch.
hey bro, how much is the time and labor to install one of this bumpers? i have a sport truck same color of yours and i just imagine how mine will look with one of those. overall looks so good.
Hey man! Awesome vid. Question: did you do a lift on your truck in order to install those size tires? I have a stock 3rd gen trd off road and wanna put some big old wheels like that, can you tell me what needs to be done in order to do that or will it fit if I keep it stock? Thanks in advance :)
Hey guys picking up my taco in 3 weeks TRD off-road. I want to mod it but I’ve been told I’ll void warranty and mess with sensors and safety features and the front camera? How are you guys getting around this? Toyota has convinced me to get the trd bilsteen shocks as it will not affect anything but but I wanted fox or kings. Anyways some help and advice would be awesome ty.
Thanks I appreciate it! Tires are BFGOODRICH all terrain KO2 size 315/70/17. Checkout the build page link in the description of the video for all the info.
DavidsYota Off-Road does the truck feel like it works harder to get moving with your set up? I want to get 33" tires soon & have been wondering if I will have any issues. Thx
Honestly the world needs more youtubers that shut up and just show us what to do. Hats off man I really like your style of content!
Thank you I appreciate the feedback!
The background music is cancer
I totally disagree. I'd rather hear some commentary on exactly what's being done. The awful music is what annoys the piss out of me.
Hahaha
Agreed music is bad, natural sounds and voice instructions are best, even if added after the fact in editing. Some people can be self conscience about their own voice, this just doesn't matter as none of us on the web know them. Unless it is a MUSIC video keep the music to a minimum.
That is the most integrated, factory looking winch bumper I've ever seen. Nice selection and build you've got.
Under tools needed. 10mm. Paused the vid for a day looking for it.. Good vid David!
The AgentZero haha glad you found it, thank You hope it helped!
I don’t even own a Tacoma and watched the the whole video. Nicely done! Have a great Thanksgiving!
hah thanks much appreciated, likewise!
Justin M how do you access the winch clutch if you need to use it?.
It’s accesiblle through the bumper cut outs, otherwise the winch is wireless and does not need to be accessed when used.
Tundra owner here, but I watched as well. Nice video!
Right on! Thanks for watching!
I've got the 2019 version of this truck in White and I think you just sold me on the bumper, tires, and lift except I don't want to level it out. Great vid and beautiful truck.
One of the best install vids I’ve seen, love it when someone knows the difference between the bolt size and wrench size! And why don’t people just turn the sound off if they don’t like the music?
Thank you for that I appreciate it! Lol I couldn’t agree more! It’s an install video not a music video!
Badass truck man. This makes me want to buy a Tacoma!
Go for it!
I have yet to meet a person that has been disappointed in purchasing a Tacoma. These trucks are stout! I absolutely love the new 2016+ design.
@@DavidsYotaOffRoad agreed. just got a '19 and loving it so far. you have any issues with your XM being spotty as hell? mines horrible I can't even listen to satelite radio bc it's just constantly searching for signal. thats literally my only complaint so far.
Nice looking setup, if I'm ever NOT in deer country and don't need the protection this looks like a nice, clean way to go.
Thanks! Absolutely!
This truck makes my heart happy!! Beautiful build man keep the vids coming !
love the intro bro that drifting on lose gravel
What about the win gravel?
8 seconds in and I had to pause and comment that the drift in the beginning was sick. And I’m not even into that shit lol
Matthew Torres hah thanks for the feedback I really appreciate it. Glad it caught your interest I hope to get more action vids out when I get a drone:
I really like the understated look of that bumper. I like that it looks like it could be stock. I do have a question though, how hard is it to make that decision to cut up your bumper to do it? I feel like I want a bumper like that or bull bars but I'd hate to have to cut up the truck to do it.
@@DavidsYotaOffRoad hey I know this is two years old but I have a couple questions. Is that a SR5 or TRD? And when you added that bumper did it make you have to swap to a heavier spring? I ordered the hiline and a 65lb winch on stock sr5 coils...
Of course the best looking one has the most cutting
Bumper is so bad ass. And so is the truck as a whole. I almost got silver, but opted for white
Thanks man I appreciate it, the white is also a beauty, did you get a TRD?
looks great. FYI - you can do this whole job without removing the bumper shroud. Remove the grill and then mark and cut the bumper shroud. The cut shroud gives you enough room to remove the crash bar.
That’s exactly what I’d do if I had a 3rd Gen. Looks gnarly af.
Thank you!
Thanks ! Keep up the good installation videos. Just straight to the point.
Not like 90% of the other videos on RUclips with their girlfriends clickbait
🤣
Really appreciate the great video. Considering just cutting an opening in the lower center plastic piece large enough to reach the clips and remove it. Maybe I can avoid having to remove the bumper all together since it can be cut while mounted on truck. Best looking low profile setup 🤘
Wow thats a nice setup. It was hard to watch you cut that bumber cover up but dam it was worth it. Ive been having a hard time resisting the urge to start modding mine. I think ive been working on my Mustangs more to keep from hacking up the truck.
HELLA funny didnt expect to see the court house at the end. Good video.
What an incredible video man!!!! Freaking love the look of that bumper plus a bad ass Taco!!!!
Does the top horizontal bar ("Bull Bar"?) affect the forward looking sensor(s) in the grill?
I I wonder if the truck has a lift job done- looks good from every angle.
Will it interfere with the sensor on the newer trucks?
Negative, the bull bar on the bumper is not high enough to interfere.
Does the sensor still working? Looks like it’s block. Anyway the bumper looks great and very clear tutorial.
That's the same one I'm looking at. Great video nicely done!
What lift are you running. Stance looks great
Nice work man. Currently installing this on my 2018 Tacoma. I added the 30 inch LED slot and tool off the bull bar though.
Just found your channel. Subscribed. That bumper is so sick
Nice, keeps the stock look. good detailed instructions.
Thanks!
I’m getting a 2022 taco trail, in October, would this interfere with all the sensors, front camera?
This is the best one I seen so far on RUclips
Nice!!! Made it look easy. Wht kind of FOGS are those!?
Awesome mod to your Tacoma! Looks Badass!!👍
Couple of questions... What type of shaving cream do you use for your legs and arms? You look smooth AF. Secondly; why didn't you paint the raw steel brackets? I would be worried about it rusting and I live in N.calif. And @ 8:30 you should have had a steel spacer made to sandwich between the frame and the nut/bolt. almost all aftermarket bumpers come with them, just not yours.. overall looks great.
Nice video.
I need the same equipamiento for the front. Please tell me were i can bay
Thanks!!!! You just won a new subscriber.... excellent video!!!
Bad as start, dope drift with a dope truck! ... then squirrelly music for pajamas wearing tweens. Close enough to suffer through and I am going to use this vid on mute to install my C4:)
Good deal. Looks nice and clean. Low profile is the way to go
What a great video !!!! Best one I’ve seen
Thank you!!
Wow great vid, thanks! How heavy is the bumper?
I want a Tacoma now , thanks for the vid
Maybe its been asked already, but what's the tire and wheel setup and does it require a lift/trimming to avoid rubs?
Now that looks really cool! Great work Sir!
Nice truck u hav there. What specs do u have on tires, wheels and off set?
Just to confirm, it doesn't look like the bull bar will interfere with safety sense in grille, correct?
Good choice of winch bumper for your Taco, it's a nice clean liook. Would like to do the same for my 2017, along with a mild lift and some other mods.
Awesome rig bro!!! Wheels
/Tires size???
Love your build 🔥🔥
Thanks man I appreciate it!
Great video, What wheels are those?
Are you in Auburn!!!!!!!!!!!!? I grew up there I recognize the courthouse!
Hi your Truck looks amazing do you have a video that describes the complete build or do you care to share?
WHAT ARE THESE RIMS CALLED THEY ARE AMAZING
They are Stealth Custom Series RAY10 Gunmetal.
Love the truck and bumper. What size tires are you running?
Nice setup. how is the SmittyBilt wireless 10k winch working so far?
Could you please please please tell me what brand and size tires they are and what size lift you have. I've looking all over you tube for the right look for my 2017 Tacoma and this is it. So nice. Also do you have an inch and a quarter spacers on the that?
There is a link titled “Build Page” in the description of this video. There you can see all the specs.
Kind of want one for my Tacoma 🤔. Great choice of music by the way!
Awsome video, love the product. Kinda curious about your lift and tire size too? You nailed that aggressive tacoma stance perfectly 👍👍👍
How much does this winch assembly weigh?
D LG the winch and bumper assembly weigh approximately 127 pounds.
That looks awesome, how much does that unit weigh.. >? What is the cost of the new bumper with the winch..?
Will this bumper effect your tss sensor?
That looks freaking fantastic!
Nice you do a pretty job ! What lift kit you get ?
Thanks, they are King 2.5 coilovers
The light bar you have is it from c4 the 30 inch extreme led? Or did you add your own if so what brand did you go with?
This bumper looks like it would interfere with the sensor in the grille on the TRD Pro with adaptive radar cruise control and pre-collision braking. Am I correct in assuming this? Great video BTW, very informative!
Does the bull bar block the front sensor behind the grill?
With the bigger tires on your truck did you ever feel like you lost some power in the truck?
What kind of rims and tires are you running ?
Hey man what nerf bar do you have on there it looks sick and I'm looking for one for my 2014 taco.
Truck looks awesome! Good video!
Thank you!
How is your sensor functioning?
It looks block.
Nice video man. Did you have a local shop paint the bumper? How much did the paint job run and what color did you do, if so?
I live in IL where I have to display a front license plate. Is there a mount that C4 makes to allow for that?
What’s your tire/lift build?
Own the same cement pro love it ARB bumpers front and rear with winch 1.25 wheel spacers big k2o tires amazing ride durability and looks mahalo from big
Island
1st thing to do pull off plastic molding across front end that toyota calls a bumper throw it in the trash get a fabricated real steel bumper mount on front end then proceed to install winch.
Great looking taco!!! Amazing drift and good edit, +1 sub
Awesome video! Do I need to use a wireless winch or can I use the 9.5 smittibilt?
Thank you! You can definitely use a 9.5k winch with a wired remote.
what rims are those looks awesome?
Again awsome Rig! can you tell me where got that amber light bar, I'm looking to buy one and locate it behind the grille?
Seline Ramos thank you! The light bar is sold by Baja Designs. It’s the 20” S8 model.
Great job. Looking at a similar set up for the 2 gen. How do you like that winch?
hey bro, how much is the time and labor to install one of this bumpers? i have a sport truck same color of yours and i just imagine how mine will look with one of those. overall looks so good.
Ray Regal thanks man, it took me about 4 hours.
Does it add better ground clearance and approach angle?
Anyone else sick of the rubber band techno beat used in almost every video nowadays? Other than that it's a nice vid
Tim Tyus i miss darude sandstorm 💔
Seems very few can make a video without obnoxious douchey music. It's sad. Nice truck and bumper. Music is horrible.
Where did you get the relocation brackets from?
What is your tire, wheel, and suspension set up?
Awesome truck!!! How big of a lift and how big are the tires?
Thanks, 3” front 1” rear. Tires are 315/70/17.
What is your rim off-set?
-10mm
How’s your mpg average?
Hey man! Awesome vid. Question: did you do a lift on your truck in order to install those size tires? I have a stock 3rd gen trd off road and wanna put some big old wheels like that, can you tell me what needs to be done in order to do that or will it fit if I keep it stock? Thanks in advance :)
Hey guys picking up my taco in 3 weeks TRD off-road. I want to mod it but I’ve been told I’ll void warranty and mess with sensors and safety features and the front camera? How are you guys getting around this? Toyota has convinced me to get the trd bilsteen shocks as it will not affect anything but but I wanted fox or kings. Anyways some help and advice would be awesome ty.
Which protects the front end better in a crash, the oem crash bar or aftermarket bumper?
Seems like the Steel bumper would give more protection but I would not know for sure as I have not tested this theory
So the whole stock bumper is plastic?
great job! looks very clean set up. your rig looks awesome what size of tires are you running and type of lift?
Thanks I appreciate it! Tires are BFGOODRICH all terrain KO2 size 315/70/17. Checkout the build page link in the description of the video for all the info.
badass happy to see its a 4x4 offraod not a sport
Great instructions! Thanks for making this video brotha!
You’re very welcome, thanks for the feedback!
Nice bro great job are you still have the original bumper balanced ??
Did you regear your truck? Those tires look huge!
Stock gearing, running 35’s.
DavidsYota Off-Road does the truck feel like it works harder to get moving with your set up? I want to get 33" tires soon & have been wondering if I will have any issues. Thx
How do you access the freespool lever?
Great instructional video, well put. Thanks
Nice video. Very easy to follow instructions. 😉👍🏼🤘
Awesome thanks for the feedback!
Does any company make something like this but not having to cut the bumper?
Sick! Looking foward to get it for mine. How much was the proce including the winch and light bar?
How'd you trim to fit? I have a 17 with 275/70/18 (33"x11") and I want to trim bit afraid to butcher it.