ur video help me a lot I really appreciate it, just a quick question, I want to install a diffuser with a third brake light can I connect it to the sequential wire too? Or what should i do? because I already installed the rear sequential lights, thanks 🙏
Hey bro I know you have it wired too be constantly on but does it flash when you hit the break? If not how would I wire it so it’s constantly on but flashes when I break? Or when you break does it get “brighter” in a way? Sorry just wanna know before I pull the trigger😂
Still have this same diffuse on for 2 years now….still holding on strong…only issues I have rn the gloss finish on the top is fading and moisture got into the led housing causing the bottom 3 LEDs to short out …. Diffuser itself is still on the car solid.
Yo what were those things you used on the wires? Sorry i’m kinda confused you put one on each from the diffuser, did you do the same on the tail light wires also?
They're called T-Tap connectors ... you can get them at Autozone or Home Depot in the wiring sections. The dark blue connectors clip onto the wires from the wires coming from the car. when you clip it on it will splice into the wire without having to actually splice it yourself. Then you just connect the wires through the t tap connectors. Basically making it plug and play.
@@BananaBoy3929 No problems nor no fitment issues. Works properly. Just the diffuser I have constantly blinks while on the brakes. I asked the developer and he said that how it was designed so 🤦🏾♂️🤷🏾♂️ get a flash controller
I wired mines up like how u did it but wen my headlights are on it keeps flashing when they are off the brake light works normally. Can somebody help me!!
Can anyone help me out I got mine but it’s a bit different mine only has the red and black cable and I tried black to black red to red and nothing but my brake taillights still work
@@s.maverickharrisonii6019 mine did before I changed my tire set up. I had to go 245 in front and 275 in the back to make it even and not confuse the transmission/transfer case.
Super dope and informational video bro!!! Quick question tho would you possibly know how to wire it so that it only lights up when I press my brakes? Really close to pulling the trigger on one of these diffusers looks super good!
Thank you I appreciate it🙏🏽....and I believe I actually wired it like that by accident the first time so it should be .... Red to red Black to black yellow to purple Only thing is, it might be flashing constantly until you let off the brake. I’ll have to play with the wires again so I can confirm. I’ll let you know soon.
Just like the first day I installed it…. Only thing is the led gets moisture in over time so just make sure the light is weather sealed before installed
Thumbs up cause you are the first mf to show what type of screws you are using…been watching vids alll day smh
Appreciate it homie ✊🏽
Best vid out there bro 🙏🏻
Really appreciate the love !! 🙏🏽🙏🏽
Great video homie
Appreciate it fam !
Ok I realize this is a great diffuser hands down no doubt but I'm also feeling that black watch. What kind of watch is that if you don't mind?
It’s an Armitron sport watch…..got it at Walmart for like $20
ur video help me a lot I really appreciate it, just a quick question, I want to install a diffuser with a third brake light can I connect it to the sequential wire too? Or what should i do? because I already installed the rear sequential lights, thanks 🙏
I have them both connected to the right tailights
Keep up the good work man . You have stunning Q
Thank you!!
That boy working
Always boy 🤙🏽
Hey bro I know you have it wired too be constantly on but does it flash when you hit the break? If not how would I wire it so it’s constantly on but flashes when I break? Or when you break does it get “brighter” in a way? Sorry just wanna know before I pull the trigger😂
Tap the yellow and green wire together for the strobe feature
I'm ordering this one for mine..thanks for sharing bro!!👊🏾
No problem brother !! You'll love it ! just make sure you take the time to clean it off properly.
when i have the light on my tail lights lose color so i have it to only it flashes when i brake, am i doing something wrong ?
Reverse the wiring and test it
is there any way to wire it so it flashes but doesnt continue to flash when you brake?
Wish it did but I think it only flashes constantly until you release the brake
Hey bro thanks for this video i did exact same, same thing happened to me there is a little gap how long will it stand for? How long yours stand
Still have this same diffuse on for 2 years now….still holding on strong…only issues I have rn the gloss finish on the top is fading and moisture got into the led housing causing the bottom 3 LEDs to short out …. Diffuser itself is still on the car solid.
Yo what were those things you used on the wires? Sorry i’m kinda confused you put one on each from the diffuser, did you do the same on the tail light wires also?
They're called T-Tap connectors ... you can get them at Autozone or Home Depot in the wiring sections. The dark blue connectors clip onto the wires from the wires coming from the car. when you clip it on it will splice into the wire without having to actually splice it yourself. Then you just connect the wires through the t tap connectors. Basically making it plug and play.
I hooked mine up last weekend... I dont like the flashing feature either... Appreciate the content... I'll be disconnecting that soon
Yea it was a little too much for me. Maybe if it blinked slower I would've wired it up.
Looks so good!!
Thank you! I appreciate it brother !
Same wiring for a g37 you think?
Should be the same idea
My wires were red, black and white from the diffuser.
Black to black
White to red
Red to green
Crazy cause I did the same damn thing but it constantly flashes when I’m on the brake and not flash a few times then go solid
No problems ?
@@BananaBoy3929 No problems nor no fitment issues. Works properly. Just the diffuser I have constantly blinks while on the brakes. I asked the developer and he said that how it was designed so 🤦🏾♂️🤷🏾♂️ get a flash controller
@@projecxbuilds thanks man
@@projecxbuilds so that’s normal .
I just got a diffuser and mine came with a red black and white wire any help how to connect the wire it’s a 2021 q50
Is there a white wire on your stock harness???
I wired mines up like how u did it but wen my headlights are on it keeps flashing when they are off the brake light works normally. Can somebody help me!!
Did u figure it out ?
Yes I did! Unfortunately the car was totaled a couple years ago lol
I have black white and red connectors, how do I connect them ?
is there a third wire too or just 2 wires coming from the light?
Thanks thought it would be harder to do🙏🏿🙏🏿
Hardest part is just wiring the light honestly.
Can anyone help me out I got mine but it’s a bit different mine only has the red and black cable and I tried black to black red to red and nothing but my brake taillights still work
Make sure you’re connected to the harness coming from the car itself to the tail light not the harness coming from the tail light
Is the diffuser light always on and becomes brighter once you brake or ?
It stays constant brightness when I’m off or on the brakes
The linked diffuser isn’t the same as the one on your car ?
www.ebay.com/itm/184706761410 This is the correct one. I just updated it in the description.
What were those bolts that you used ?
Self tapping screws
Looks great brother keep it up
I appreciate it Fam !!
@@Mahamotives no problem
Wired mines works fine but now the light only light up from the bottom go gotta tap the light so it all lights up smh
Check and make sure the wires are properly making connection with each other
You said you spent 500$ on eBay for this ? They are all going for 80-90 on eBay ?
Nah at the time I bought it, it was around 100 … I was talking about the carbon fiber diffusers
Why wouldn’t this fit a 2019 or will it?
It won’t …. 2018+ Q’s have a different shaped rear bumper
Your Q Rwd? I have the same wheels and im having a hard time finding a good set up that wont fuck up my transfer case
Yea I’m RWD .... I have the staggered setup 20 x 9.5 +45 front 20 x 10.5 +25 rears
@@Mahamotives lucky lol. My GTRS are staggered as well but im awd.
@@CreditGod1 try to trade someone for their Rears....all Rears look harrdddd on the Q
@Mahamotives do your awd temp warning comes on with the stag set up bro
@@s.maverickharrisonii6019 mine did before I changed my tire set up. I had to go 245 in front and 275 in the back to make it even and not confuse the transmission/transfer case.
What is the yellow wire for or do if connected?
It will flash when you brake
@Mahamotives ahh ok. So not connecting it will give off a normal brake light versus the fancy flashing?
@@randomlybro it will just stay on solid when you headlights are on no flashing
@Mahamotives oh I see. Thanks for your help sir.
@@randomlybro no problem 🤙🏽
Will it work on 2019 Q50??
2019 has a different style bumper … you’ll need the one specific for 2018+
What did you do to the weather strip ?
Didn’t use it
Fyeee
Appreciate it bro!! 🤙🏽
Super dope and informational video bro!!! Quick question tho would you possibly know how to wire it so that it only lights up when I press my brakes? Really close to pulling the trigger on one of these diffusers looks super good!
Thank you I appreciate it🙏🏽....and I believe I actually wired it like that by accident the first time so it should be ....
Red to red
Black to black
yellow to purple
Only thing is, it might be flashing constantly until you let off the brake. I’ll have to play with the wires again so I can confirm. I’ll let you know soon.
@@Mahamotives thank you man! ima order one tonight!
hmu @strictlyqs if you need a diffuser 🔥
is it still holding up?
Just like the first day I installed it…. Only thing is the led gets moisture in over time so just make sure the light is weather sealed before installed
@@Mahamotiveswhat would I use to weather seal the light?
Nice
Appreciate it brother!
anyone knows if this would fit a 14 nissan maxima
Not sure, you might have to custom make one if you can’t find one specific to your car
how was fitment
Fitment was perfect 👍🏽
@@Mahamotives did you have to get longer exhaust tips?
@@jinkazama3024 no … kept the stock ones and they sit flush with the bumper and diffuser
you had to cut wires ? even with the t taps
also is the link the specific one you bought? it looks different in pictures
yea that flashing is stupid
Yea not my style either
Terrible install video tbh
This video has been up for 2 years and this is the first negative comment …. Appreciate the feedback though brother ✊🏽