Hello, I have a quilko qk-ce220RL4 motor with sliding gates, I have registered all the options, but when the new gate is closed, 4 seconds closed, while the signal lamp is on again, then the gate opens itself, can you help me?
I have 3 gates with same type of gate motors , is there a way to keep from opening more than one gate sometimes with remote, I believe because of same frequency?
Hello sir. I need to know how could i make a gate door goes half to left half to right. So two motor two side. But could operate in one remote control and etc. Please if you could make a vedio same as
I hve an error that the gate is not opened initially but after i gave some force to gate the motor start to open the gate... It needs an external force
I installed sl600ACL but all the bottoms work for open stop and close and has no screen to program , how to get each bottom to work for separate function ?
Hello, thanks for the detailed video, I have a question about the control board, I have a Proteco mover 8 motor with the same board, is the initial start-up of the motor done in the same way, or is the setting different for each motor.
Hello, thanks for contacting Quiko. Proteco control boards have different software, so please contact Proteco. At your disposal for any further info. Greetings from the Quiko Team.
One off the major problem with Quiko sliding gate are getting stuck when gate is closing. So gate is not opening when press push button or button of remote control. I hope this problem is resolved. When gate is stuck it can be opened manually unless the gate lift from the back.
Dear Qassim, thanks for contacting Quiko. Thanks to the BRAKE function supplied with latest versions of our control boards, the problem you are describing doesn't happen anymore.
A customer has a motor identical to what you have there. The problem he is having is when the gate almost close the slow down feature struggles and the gate dont close but works fine on the opening. There are no tight spots at all but the is extremely heavy. How can you assist.?
Thanks
منور يا هندسة
Well explained tnq😊
I guess it's kinda off topic but does anybody know a good website to stream newly released series online ?
@Keaton Luis Flixportal =)
@Justus Jordy Thanks, I signed up and it seems like they got a lot of movies there :D I really appreciate it!
@Keaton Luis You are welcome :D
Hello, I have a quilko qk-ce220RL4 motor with sliding gates, I have registered all the options, but when the new gate is closed, 4 seconds closed, while the signal lamp is on again, then the gate opens itself, can you help me?
Hello, please email Us your request and contact details to info@quikoitaly.com .Our technical team will get in touch
Very nice idia.so 👌👌👌👌👌👌👌
I have 3 gates with same type of gate motors , is there a way to keep from opening more than one gate sometimes with remote, I believe because of same frequency?
That can only happen if you program the same button on the remote to different motors.
Good night can someone assist me where I can get a control board for my quiko motor
Hello, please email Us your request and contact details to info@quikoitaly.com . Our sales team will assist you then
「とても良くて面白いビデオは素晴らしいエンターテインメントの感覚をもたらします!」、
Hello sir. I need to know how could i make a gate door goes half to left half to right. So two motor two side. But could operate in one remote control and etc. Please if you could make a vedio same as
I hve an error that the gate is not opened initially but after i gave some force to gate the motor start to open the gate... It needs an external force
Dear I have a new QK-CE220BATRL4 I have a doorbird D201 how should that care on the board
Please email Us your request to info@quikoitaly.com as well as your full contact details to receive support
I hve break function set by supplier but i can't find A9 in controller for now... How he has set the brake without a9
how can i order your control board?
How to set auto closing when is open door
Satisfactory
I installed sl600ACL but all the bottoms work for open stop and close and has no screen to program , how to get each bottom to work for separate function ?
Dear Lucio, Sl600ACL is not a Quiko product. Please refer to the corresponding manufacturer.
Hello, thanks for the detailed video, I have a question about the control board, I have a Proteco mover 8 motor with the same board, is the initial start-up of the motor done in the same way, or is the setting different for each motor.
Hello, thanks for contacting Quiko. Proteco control boards have different software, so please contact Proteco. At your disposal for any further info. Greetings from the Quiko Team.
wow
Sir plz,can you make tutorial about came Motor
Price
One off the major problem with Quiko sliding gate are getting stuck when gate is closing. So gate is not opening when press push button or button of remote control.
I hope this problem is resolved.
When gate is stuck it can be opened manually unless the gate lift from the back.
Dear Qassim, thanks for contacting Quiko. Thanks to the BRAKE function supplied with latest versions of our control boards, the problem you are describing doesn't happen anymore.
A customer has a motor identical to what you have there. The problem he is having is when the gate almost close the slow down feature struggles and the gate dont close but works fine on the opening. There are no tight spots at all but the is extremely heavy. How can you assist.?
Why door open otuamatic after 3 sec close
Plz give me the contact number of distributor in India
Expliqué nous en arabe s'ils vous plait nous manquant un expérience
Proteco
「どうやってやるの?」、
what your english
Not see clearly
Imej itu terlalu menyinggung perasaan