No way this can deliver 5000 watts at any voltage, current or speed ! Yes a PM BLDC motor can serve as a 3-phase AC PM alternator. You only need to rectify 3 phase ac output using a 3-phase rectifier to get dc power. Resistive power dissipation in the thin coil wire reduce efficiency; heating may even burn up the generator. Also, he cut off one of the phase wires and is only using two wires for output. That means he will only use the output of only 2 phases (depending on whether the phases were star or delta connected originally) which is a waste. He sjould have passed all three wires out, or installed 6 diodes internally on the PC board to create an internal 3 phase rectifier, and passed the dc power out using two wires.
He is also getting a really ugly wave form. The stator can be rewound for single phase, if the number of poles and magnets are the same. Next he'll make a video about how to make a 3 wheeled car!
This whole video is so pointless when all he had to do was snip away the hall wires from the outside instead of opening it up just to add more unnecessary wires lol he literally accomplished nothing by opening the wheel 😂😂
And that is the wattage when it is a motor. As a generator it will be less. It is sad that people lie like this when they could help people to create something usefull.
To only get power from coasting: Diodes connected to wires going into hub to charge external battery through solar module? Or am I missing something here?
@@Teknopottu besides, this was totally useless, he simply removed the old wires and replaced them. And because he removed 1 of the 3 he only gets a third of the power. Just make a full bridge rectifier and use the motors full potential without ever opening it.
Yo fabrique un aerogenerador con una rueda parecida. Lo monte en un savonius y luego en un sistema de palas.. A maxina velocidad de viento, no genera 5 voltios.. Esta muy bien como bricolaje, pero no da mucha energía..
Why did he used two wires instead of three? Talking about three phase AC generated. It is sad that money scamming and misinformation spreading like this exists. Luckily there are better content makers.
Para empezar ese motor es trifásico y al cortale un cable de los tres que generan corriente estás perdiendo potencia. Es un motor de unos 45w que usado como aerogenerador da unos 30,36v . Nada que ver con los watios que dices,ahh y un consejo la rueda sale hacia arriba y no es necesario cortarla luego solo los de Lepe somos los brutos.saludos
Nhìn bạn làm là tui biết bạn chẳng biết gì. Thao tác là đủ hiểu trình độ không đủ. 3 phase mà lấy ra 2 dây là hiểu trình độ thấp của bạn. Thứ không biết gì về điện mà chế tác.
Absolutely no need to open the motor, he could have done the exact thing by cutting the wires from the outside. And you don't, measure resistance while holding the wires with your fingers, you are just measuring the resistance of your body.
The chopping of one of the three phase wire it looks to me like it's a bad idea you need all the thee wires then a bridge rectifier is need that will convert AC from the three wires to DC output
انت لم تغير شيئ اطلاقا لقد الغيت خط واستخدت الباقي عجلة السكوتر تحتوي على ثلاث ملفات عليك توصيل الملفات مع بعضها واستخراج خطين فقط لتوحيد الملف وليصبح كل الملفات ملف واحد للاستفادة القصوى وانت لم تفعل ذلك
Hi I would like to power a heater for my pond using a motor, Its a large pond 3000 gall. What size motor and magnets would i need If poss could you list the parts or do a video Thanks Great channel
What you need is a fish wheel. Like a hamster wheel but for fish. You can find them online between the infinite energy machines and the thing where you put a thumbtack on a toothbrush connected to a motor.
Так небрежно относиться..... Жуть. Если нормальный движок то можно максимум 350 W ..... Магнет 30/ 11/ h3. Провода 0,6 и 7 - 8 витьков. Полупрофан в эл. физике относительно мех. физики. Ташкент. 67 лет.
Salam my Brother. I See your Video all and say MashaAllah. I have e Scooter too. Wegen i make this Project on my e scooter, than i can normal work with my e scooter or Not. Thx Brother
@@newsoftheworld7927 my friend, when you take a hoverboard or scooter motor without any modification i does provide 220v but it can light only a 12v bulb. You need a bridge rectifier to get 12-24-36v to charge a battery,or a wind turbine controller. The 3 large wire that work .you must cut the small wires.
@@tarekg28 Hi. I made a hoverboard wind turbine. I get very low voltage. Do I need to remove the small wires(cut out of around coils,) for the 3 phase wires to produce? Thanks Mike
@@mke4092 hi .you simly ignore the small wires .connect the thick 3 wires to a 3 phase rectifier.the rectifier has 3 AC line in and 2 DC line out .you must add a motor speed controller to the main motor to control the rpm. the output of rectifier can be between 12v and 60-70v.you can adjust with the motor controller.the output of rectifier Wil go into a solar controller to adjust the input voltage to the batteries. 12 or24v.
![NLE Choppa - Or What ft. 41 (Orchestra Mix) [Official Music Video]](http://i.ytimg.com/vi/biOFASEgSOM/mqdefault.jpg)
No way this can deliver 5000 watts at any voltage, current or speed !
Yes a PM BLDC motor can serve as a 3-phase AC PM alternator. You only need to rectify 3 phase ac output using a 3-phase rectifier to get dc power. Resistive power dissipation in the thin coil wire reduce efficiency; heating may even burn up the generator.
Also, he cut off one of the phase wires and is only using two wires for output. That means he will only use the output of only 2 phases (depending on whether the phases were star or delta connected originally) which is a waste. He sjould have passed all three wires out, or installed 6 diodes internally on the PC board to create an internal 3 phase rectifier, and passed the dc power out using two wires.
He is also getting a really ugly wave form. The stator can be rewound for single phase, if the number of poles and magnets are the same. Next he'll make a video about how to make a 3 wheeled car!
Challenge accepted !
This whole video is so pointless when all he had to do was snip away the hall wires from the outside instead of opening it up just to add more unnecessary wires lol he literally accomplished nothing by opening the wheel 😂😂
Ben rüzgar türbini olarak kullanmak istiyorum . Bu motorun iç yapısını değiştirmeden köprü diyot yaparak en i verim mi alırım ?
When you see Indian doing free energy just keep scrolling
I think there are geniune ones.
You destroyed a 350 watt three-phase motor and turned it into a piece of crap.
Thanks for the info, here are a lot of scooters standing around no one takes care of them …
I know right you ever been to the city? They got them laying around everywhere
Идеальный груз для засолки капусты.
No amps, this is not 5000 watts its only 300 watts .
And that is the wattage when it is a motor. As a generator it will be less. It is sad that people lie like this when they could help people to create something usefull.
Ac amps are way different
To only get power from coasting: Diodes connected to wires going into hub to charge external battery through solar module? Or am I missing something here?
@@Teknopottu besides, this was totally useless, he simply removed the old wires and replaced them. And because he removed 1 of the 3 he only gets a third of the power. Just make a full bridge rectifier and use the motors full potential without ever opening it.
maybe only 100W, hardly even that.
Yo fabrique un aerogenerador con una rueda parecida. Lo monte en un savonius y luego en un sistema de palas.. A maxina velocidad de viento, no genera 5 voltios.. Esta muy bien como bricolaje, pero no da mucha energía..
Te dará 240 v si en el centro de las bobinas los desempalas y separas 2 alambre de cada bobina colocándole en serie
Why did he used two wires instead of three? Talking about three phase AC generated. It is sad that money scamming and misinformation spreading like this exists. Luckily there are better content makers.
Yes, absolutely! 👍
That's correct!
Para empezar ese motor es trifásico y al cortale un cable de los tres que generan corriente estás perdiendo potencia. Es un motor de unos 45w que usado como aerogenerador da unos 30,36v . Nada que ver con los watios que dices,ahh y un consejo la rueda sale hacia arriba y no es necesario cortarla luego solo los de Lepe somos los brutos.saludos
What did u meassure with your voltmeter if it was one?
It can't give you 220 volts
What you can get is 45v to 48v
Still decent.
Nhìn bạn làm là tui biết bạn chẳng biết gì. Thao tác là đủ hiểu trình độ không đủ. 3 phase mà lấy ra 2 dây là hiểu trình độ thấp của bạn. Thứ không biết gì về điện mà chế tác.
Absolutely no need to open the motor, he could have done the exact thing by cutting the wires from the outside. And you don't, measure resistance while holding the wires with your fingers, you are just measuring the resistance of your body.
excellent
The chopping of one of the three phase wire it looks to me like it's a bad idea you need all the thee wires then a bridge rectifier is need that will convert AC from the three wires to DC output
انت لم تغير شيئ اطلاقا لقد الغيت خط واستخدت الباقي عجلة السكوتر تحتوي على ثلاث ملفات عليك توصيل الملفات مع بعضها واستخراج خطين فقط لتوحيد الملف وليصبح كل الملفات ملف واحد للاستفادة القصوى وانت لم تفعل ذلك
Hi I would like to power a heater for my pond using a motor, Its a large pond 3000 gall. What size motor and magnets would i need If poss could you list the parts or do a video Thanks Great channel
What you need is a fish wheel. Like a hamster wheel but for fish. You can find them online between the infinite energy machines and the thing where you put a thumbtack on a toothbrush connected to a motor.
@@hugemcballs2245 XAXAXAXAXAAXAX
niezła bajka
espectacular gracias por ese video por compartir Dios te bendiga
we cannot see the meter on the film. I think it is only 5 V AC
India call all scientists of world get team techno for one world one supper techno no competative confined techno
please next time use timelap
If engine as a wheel, means u speed it up? Adding like copper silver or gold?
What generator is it? It is actually new idea about a wheel right? "To use engine on the wheel itself"
Your english is very poor, we dont understand what you are trying to ask.
I have tested it several times face to face give 78 volts
Так небрежно относиться..... Жуть. Если нормальный движок то можно максимум 350 W ..... Магнет 30/ 11/ h3. Провода 0,6 и 7 - 8 витьков. Полупрофан в эл. физике относительно мех. физики. Ташкент. 67 лет.
produce in picla 5000w!.....MAX 30W
Maybe 31w
Yasir.25.volt.veren.bi.motor.yaptim.kanatlarla.doğrulttum.12.40.ahp.akü.şarz.edermi.çok.rüzgar.var burda.kanatlar.karariyor.75.w.motor.3.4.ahp.civari.ne.dersin.yaz.türkiyeden.selamlar
super, bravo, c'est très intéressant
Let us be fully e enabled by supper conductor , nano magnet cvd supper capacitor enabled
Salam my Brother. I See your Video all and say MashaAllah. I have e Scooter too. Wegen i make this Project on my e scooter, than i can normal work with my e scooter or Not. Thx Brother
Нямаше смисъл да се трудете толкова само със диот мост3510 и всичко е ок
magnifique.
Thanks for your video sir
Tikeh kiale bhai
Great idea, terrible video.. no testing.. you spent 12 mintutes on a 1 minute video and could of made a short. but greed calls.
One set of winding wire ideally kept inside.
How many amps did you generarte?
10 15 amp
Dont Work at 220volts Only 18-24volts delivered
it does provide a 220v my freind for sure
@@tarekg28 i have build this one s two Times but it dont Deliver 220v
@@newsoftheworld7927 my friend, when you take a hoverboard or scooter motor without any modification i does provide 220v but it can light only a 12v bulb. You need a bridge rectifier to get 12-24-36v to charge a battery,or a wind turbine controller. The 3 large wire that work .you must cut the small wires.
@@tarekg28 Hi. I made a hoverboard wind turbine. I get very low voltage. Do I need to remove the small wires(cut out of around coils,) for the 3 phase wires to produce? Thanks Mike
@@mke4092 hi .you simly ignore the small wires .connect the thick 3 wires to a 3 phase rectifier.the rectifier has 3 AC line in and 2 DC line out .you must add a motor speed controller to the main motor to control the rpm. the output of rectifier can be between 12v and 60-70v.you can adjust with the motor controller.the output of rectifier Wil go into a solar controller to adjust the input voltage to the batteries. 12 or24v.
Next part video
Mashallah
Less then 1/2 hp or even less, might be few amps, 5000 watts is joke
esa baina no es mia pero me dio lastima como ese bruto le callo a patadas
Big faker
ESE ES UN GENERADOR TRIFASICO!!!!... Muy mal el video
Благодарю вас
Painful to watch
5000w 😂😂😂
Hola como le llaman a eso que se frene efecto leen no se como se escribe
كيف ارقع من ٢٥ فولت ٢٣٠
مازبطش
48v give only this hub scooter
U don't know how to cut wires
Load testing video
5000000000 w
XAXAXAAXXAX
😅😅😅
Sorry , No way 5000w.
5000w🤣🤣🤣🤣
5000 miliwatts
Fake😅😂😅
no no no no 50000000W
Like a Joker
É
BI
30 فولت
Dont deliver 220volts
If you lie then juck you 😏
Big lie 🤥
Ninguém chamo d n
So fake.
Your multimeter selector in 2 volt range
RUclips cartoon network