The gauge on the front as well as the special fill adapter is a "No Go" for me. Although I admit, I'm not currently looking for a new air pistol. Thanks for your thoughts on it. Mike
at first I thought it was junk and then I notices the barrel need adjusted to where it locks the mag in place ,the 12 round clip is a dream come true@@JaceBell
The from sight will move side to side, and the back up and down. Everybody was complaining about how the sites were not adjustable. They are OK back to your video.
So I looked at the front sight on my jet and noticed a single screw. I will mess with it soon to see if I can adjust it. Perhaps I will make an updated video. Thanks for watching.
Interesting video! The fill nipple part got me kinda scared to try to fill mine without swapping the fill thingy... This is a bit weird Off the Shelf Airguns did mention having to do it also
@@LowkeyAirgunner I almost did not buy this pistol due to the fill nipple being in a weird spot, but besides that it is a pretty accurate pistol. I also love the fiber optic sights. Thanks for watching.
@LowkeyAirgunner You must be talking about the part where I was having trouble getting my foster fitting in the male fill nipple on the gun. Well, after a break in period...the male nipple got worn down enough so that I can now use my old female fitting. I did not have this knowledge of the wear factor when I made this video. Thanks again.
I just got mine 2 weeks ago and fill my jet 1 .22 with my compressor with a foster quick connect and never had to switch. Hmmm, maybe they're sending out new guns with new foster fitting. Any chance the bolt wasn't open?
After some more use...the fitting that was provided now fits on the foster male nipple. I guess it needed some wear. Even with the bolt closed, my refurb Jets still tend to leak while degassing the hose. With me it is usually user error. Thanks for the comment and tuning in.
I typically use Crosman 14.3 grain hollow points. Those pellets offer great accuracy in most of my pellet guns. I have three other brands that I could try. Thanks for the video idea and for watching.
Nice enjoy 👍😉
Thanks 👍
Thanks for your time, I learned a lot,,
Thanks for watching ;)
The gauge on the front as well as the special fill adapter is a "No Go" for me. Although I admit, I'm not currently looking for a new air pistol. Thanks for your thoughts on it. Mike
I understand. Thanks for your input and for watching. Nice to hear from you again.
you got a deal on that nice pistol good sir
Oh yes I did.
me too@@JaceBell
@@BackyardDispatcher So you finally bought one? Is it cycling ok?
at first I thought it was junk and then I notices the barrel need adjusted to where it locks the mag in place ,the 12 round clip is a dream come true@@JaceBell
@@BackyardDispatcher 12 round clip? Did that come off another gun?
The from sight will move side to side, and the back up and down.
Everybody was complaining about how the sites were not adjustable. They are OK back to your video.
So I looked at the front sight on my jet and noticed a single screw. I will mess with it soon to see if I can adjust it. Perhaps I will make an updated video. Thanks for watching.
Interesting video!
The fill nipple part got me kinda scared to try to fill mine without swapping the fill thingy...
This is a bit weird Off the Shelf Airguns did mention having to do it also
@@LowkeyAirgunner I almost did not buy this pistol due to the fill nipple being in a weird spot, but besides that it is a pretty accurate pistol. I also love the fiber optic sights. Thanks for watching.
@JaceBell I was not talking about the placement I don't really mind personally but having to change a part on the hose is kind of annoying 🤔
@LowkeyAirgunner You must be talking about the part where I was having trouble getting my foster fitting in the male fill nipple on the gun. Well, after a break in period...the male nipple got worn down enough so that I can now use my old female fitting. I did not have this knowledge of the wear factor when I made this video. Thanks again.
@@JaceBellinteresting so maybe mine will work put of the box?
@LowkeyAirgunner I hope so. Good luck.
Just shave off the bottom of the grip with a Dremel tool.
I just might do that.
@@JaceBell
Then wrap a little camouflage tape for a better feel and you will have your own custom pistol like my NOTOS 8 inch.🤠
I just got mine 2 weeks ago and fill my jet 1 .22 with my compressor with a foster quick connect and never had to switch. Hmmm, maybe they're sending out new guns with new foster fitting.
Any chance the bolt wasn't open?
After some more use...the fitting that was provided now fits on the foster male nipple. I guess it needed some wear. Even with the bolt closed, my refurb Jets still tend to leak while degassing the hose. With me it is usually user error. Thanks for the comment and tuning in.
@@JaceBell need the bolt open to charge
✔💯 Good info. Im checking out airgun capital's kit for moderator.
Airguns capital? Hmmm...never heard of it. I'm checking it out right now.
Just looked at airguns capital. Looks like they have a lot of Cool accessories. I will be shopping there in the near future.
Thanks for getting back response
Can you use any 22 caliber pellet in Hansen jet 1 pistol
I typically use Crosman 14.3 grain hollow points. Those pellets offer great accuracy in most of my pellet guns. I have three other brands that I could try. Thanks for the video idea and for watching.
Volume to low couldn’t watch
I need to work on that. Thanks