This method is not work for me due to hard disk is not showing In this software. When I try to format from cmd "a device with does not exist was specified"
@@flare.tutorials main na reset ki thi ya shahid hardware wala sa kam karwya tha i don't remember kuch jala howa tha us na 1500 la ka repair kar ka diya tha
Tried many times to “ right click on the corrupted or bad disk” but nothing shows up for right click! But when i do the right click on the current disc, the small pop up shows up and i can see the options as Rebuild MBR or alighn all partitions etc… Plz help
Hello @Lotus Geek , my problem is that my external hard drive shows device unknown and not initialise. I don't have space allocated and when I check on the CMD, its shows 0mb space allocated and available.. Please help !!
after intializing and creating partition will the data on my 4tb hard disk get formatted ? also later i used ease us data recovery software to recover my data but it got stuck saying my drive has bad sectors.. now im confused how to access my data
I tried to do it with windows own Disk management, I wasnt sure what to chose so I selected GPT instead of MBR as I read this was the one to chose if I was unsure. But when I tried to do it it said: The request was not fulfilled because of a serious error in device hardware. Does that mean the disk is totally gone and I can't recover the data on it ? I tried with MBR also but same error. Will probably be the same error if I try with minitools program or the one from easus.
Nice tutorial came across. I am facing a problem with recovering data from my Dell Inspiron 2.5 inch SATA hard drive. When I connect it using an adaptor on another laptop, the drive is not visible... it shows Disk 0 offline, not initialized. Kindly help with your knowledge.
hi. 1. so after we initialized and create partition, can we use the hard drive again or need to use a new one to recover our data? 2. is this way can be use on windows 11?
after 2 years of your comment i can say that just leav your drive for 5 days and connect i'm pretty sure it will at work as read only then you can take back and format
Hi, I recently just change my PSU and the hard disk doesn't detect but when change to other sata slot it detect but its unknown. With my previous PSU hard disk works fine but the PC always restarting. Did your method will work for my problem, I'm afraid there's a side effect to my hard disk
i got a war going on in my pc now, new 8tb Firecuda randomly disconnects, i looked this problem up it tells me to disable a usb power saver in windows ive done that 8TB seems to be working good no i have another problem, the 2TB isnt even showing up no more i go to disk mangement it says the 2TB needs initializing i click that it then says "incorrect function" i cant do nothing with this 2tb drive good thing there was nothing on it and i mean nothing it was just a old blank drive i had in case i needed it its really just been sitting there doing nothing powered up looking pretty. what did i recently change for this drive to die? the usb powersettings so i went back there enabled it, good news 2TB back online? i assume 8TB problem will come back but why? what am i doing wrong? 4TB still works solid its not glitching like the others
Hi, I want to ask is it possible i got this error because my enclosure i have here can't manage the storage capacity greater than 2tb? I have existing 3.5 HDD enclosure for my 500gb hard drive but as soon I plug my 4tb hard drive in my enclosure I got this error .. I'm planning to buy another enclosure for my existing 4tb hard drive that can handle storage capacity greater than 2tb and use it for as external hard drive for personal storage but I was hesistate a bit because i might encounter another error like this again, enclosure for this type of drive is pretty expensive here so I want to make sure if that is also a cause ... thank you.
Generally this problem arise due to failure in hard disk .. if this method helps you fix the issue there isn’t any need of enclosure(if it’s cabinet as I don’t understand what enclosure is)
@@LotusGeek I already try this tutorial but it doesn't work for me it can't initiliazed due of its shown grey out Disk unknown not initialized without storage capacity on it in MiniTool Partition so I can't initiliazed or rebuild its MBR. Any idea how can i initiliazed a 4tb hdd in windows, thanks
i tried in disk mngmt but I can't also covert it to GUID or GPT, I tried also cmd nothing works it say Device is not ready, I'm losing hope on this one 😭 the hdd is not that physically damage thou
Try this one to convert : Convert MBR to GPT without losing data in Windows 10 | LotusGeek ruclips.net/video/E7X-6ozBUvg/видео.html May be it will help
hi my problem same but after Initialize Disk process its showing DATA ERROR (CYCLIC REDUNDANCY CHECK) what I do, please give me the solution, and with losing my data, please
I have 250 gb Seagate hardik, I had swapped pcb and also had swap the bios. Now my hdd shows 0disk unknown not initialise. When I right click on it says to select MBR or GUID . what if I select MBR default option. Will I lose my data or it will initialise. Pls assit
Hi I downloaded the MiniTool partitions wizard 12.3 and right clicked to rebuild MBR however when I clicked on Apply, I brings me to upgrade and pay for service. How can I rebuild MBR in free version ?
Hi. I have problem that my external hdd (Disk 1) is not initialized @ Unalocatted. So how to initialize without losing my data. I wan to retrieve my data. Pls advise
This tutorial will help you out. And even if you need to format the drive you can recover the data using this tutorial : ruclips.net/video/BPoo5bmsWoo/видео.html
I have a Disk formated in NTFS and can be read when attached to win10 box, however, when attaching it to a win server it gets in "Disk 0 unknown", downloaded "minitool partition Server Edition", fired it it even does not recognize the disk and it is not displayed in the disks list, any idea? Thanks
TERIMA KASIH. Thank you. SANGAT MEMBANTU. very helpful. SEMOGA TUHAN YESUS MEMBERKATI ANDA & KELUARGA ANDA. May Lord Jesus bless you & your family. Salam dari kota Manado (Indonesia) Greetings from Manado City (Indonesia)
i received,,, not initialized hard encountered error don't know what's major issue bcz unable to fix this issue with said software's also (MiniTool partition wizard) (EaseUS partition)
I installed ssd and before that i removed hard disk after installing ssd i not able to use hard disk using hard disk casingi Idont need data i want my hard disk space I can use hard disk after removing ssd It is working fine But i cany use it with ssd in which os is installed
bro my hdd 500GB showing in this app it's 0.00GB and am unable to right click because it's showing 0.00gb, is there any other method to format and show my hdd bro... please 🙏 help me bro so much official data is there on my hdd.....
@@LotusGeek Right-Clicking on the bad drive in Minitool Partition Wizard is not giving me any options. What can I do now?1:50 when I am right-clicking, nothing is appearing so that I can click rebuild MBR. please help me, bro. (this problem is with everyone sir .. could you please help us.. because I store my class meetings there and now I cannot study .. please help me
Dear Sir I have downloaded the mini tool , but my hard has been labeled with it as a bad disk, and I was not able to rebuilt the MBR. I hope if you would like to guide me in order to resolve this issue Kind Regards
Sir meri hard disk kahi bhi jagah show nhi kr rhi he plzzz help data to nhi loss hoga na plzz sir koi meri help mera wedding sesone ka shara data usme hi he
Sorry bro team viewer can’t support.. privacy and security issue Use this to recover data: Recover data after formatting hard disk [pro version for free] | LotusGeek ruclips.net/video/BPoo5bmsWoo/видео.html
The app asks to upgrade to paid version in the last step when you want to recover your data. It is very expensive and of no use after datarecovery. Not useful for me. !!
Right-Clicking on the bad drive in Minitool Partition Wizard is not giving me any options. What can I do now?1:50 when I am right-clicking, nothing is appearing so that I can click rebuild MBR. please help me, bro. (this problem is with everyone sir .. could you please help us.. because I store my class meetings there and now I cannot study .. please help me
Use windows 10 bootable usb and give boot using it. Now choose the option “repair your PC” after that choose troubleshoot > advanced options > cmd Type the following command and hit enter: Bootrec /fixboot Bootrec/fixmbr Bootrec /rebuildbcd If one of the command gives you the error “access is denied” type : Bootsect /nt60 sys
(2024 Updated) Fix Disk Unknown Not Initialized: cutt.ly/iennV1tr
All-in-one disk management solution: cutt.ly/LennB9ps
This method is not work for me due to hard disk is not showing In this software. When I try to format from cmd "a device with does not exist was specified"
bro do you get any solution
@@flare.tutorials cmd ka through format mara tha
@@justfun3796 bhai btade kaise kru dimag kharab ho gya tabse dhek rha hu videos kuch nhi ho rha
@@flare.tutorials main na reset ki thi ya shahid hardware wala sa kam karwya tha i don't remember kuch jala howa tha us na 1500 la ka repair kar ka diya tha
@@justfun3796 axa brother thanks for the help
Right-Clicking on the bad drive in Minitool Partition Wizard is not giving me any options. What can I do now?
i'm facing the same problem...
what to do yaar...
Same I tried everything still ended up reading bad disk and a black line
It seems we have hardware problem, return if u have warranty otherwise it's fucked
Same problem ( showing bad disk )to me also bro have you get any solutions pls rply me
ongaluku punniyama pogum
Hi bro its showing bad disk so right click not coming, how can I format then, please give solution
Same bro
Bhai, in the tool window it dose not allow me to Right click and the disk says BAD disk, please help what to do
Same issue . It says bad disk , rt click nothing pops us
Its showing BAD Disk
Did u find out what this meant ?
Tried many times to “ right click on the corrupted or bad disk” but nothing shows up for right click!
But when i do the right click on the current disc, the small pop up shows up and i can see the options as Rebuild MBR or alighn all partitions etc…
Plz help
Try rebuilding the mbr first and then convert to gpt if option is available
Hello @Lotus Geek , my problem is that my external hard drive shows device unknown and not initialise. I don't have space allocated and when I check on the CMD, its shows 0mb space allocated and available.. Please help !!
Same error do you find the fix? Pls lemme know
Please reply. I am also facing the same issue.
@@dontknow592 hard disk is physically damaged from inside it needs to be repaired or sent for RMA
@@simardeepsingh8011 is it possible to still recover the data files?
@@ji_an8 nope not in the case of physical damaged get it repaired then you can recover data
Thanks for sharing. However, i couldn't able to right click on the disk which is having issue. Please guide.
السلام عليكم هل لقيت حل لـ المشكلة ؟
Hello, did you find a solution to this problem?
Cannot right click
Samee I can’t click on the right bottom so it doesn’t show the option the rebuild MBR
It’s hardware fault you need to replace hard disk
You saved me
You saved me
I thout I was done toast
You saved me
Easy peasy .... amazing job on everything.....
Can we get same size data back to drive ??
Simple to do is change port if external te change usb port if internal like in my case then use another port it will diffinately work.. thanks.
Happy to help
after intializing and creating partition will the data on my 4tb hard disk get formatted ? also later i used ease us data recovery software to recover my data but it got stuck saying my drive has bad sectors.. now im confused how to access my data
Whenever I use that harddrive, My Pc wont open, And When I use a SATA To USB, My Driver doesent show up.
It detects my hard disk but says Bad Disk.Right click doesn't work for me why??
It’s damaged. Hardware fault
I tried to do it with windows own Disk management, I wasnt sure what to chose so I selected GPT instead of MBR as I read this was the one to chose if I was unsure. But when I tried to do it it said: The request was not fulfilled because of a serious error in device hardware. Does that mean the disk is totally gone and I can't recover the data on it ? I tried with MBR also but same error. Will probably be the same error if I try with minitools program or the one from easus.
Same problem bro how you got the solution was the video helpful
@@sagardas2 never got it fixed sadly. Bought new disk.
Nice tutorial came across. I am facing a problem with recovering data from my Dell Inspiron 2.5 inch SATA hard drive. When I connect it using an adaptor on another laptop, the drive is not visible... it shows Disk 0 offline, not initialized. Kindly help with your knowledge.
Does it showing in disk management ??
@@LotusGeek it is showing no media
Will this recover all my files perfectly according to how they were?
Need help.. I’m unable to see anything after doing right click on my Disk2 MBR
hi.
1. so after we initialized and create partition, can we use the hard drive again or need to use a new one to recover our data?
2. is this way can be use on windows 11?
Yea you can use the harddisk to recover data
You can use in windows 11 also
Hi Sir, can I ask for your help? Ive downloaded tje file but its 12.6 version and the rebuild mBr Is not there? should I find the old version?
Minitool is not detecting HDD what should I do
after 2 years of your comment i can say that just leav your drive for 5 days and connect i'm pretty sure it will at work as read only then you can take back and format
it's wrote "bad disk" and can't even right click on it, anyone knows why?
Hi for me it showing (bad disk) and rebuild button is not showing for me .
Please help me to solve it
It’s damaged .. hardware error
Hi, I recently just change my PSU and the hard disk doesn't detect but when change to other sata slot it detect but its unknown.
With my previous PSU hard disk works fine but the PC always restarting.
Did your method will work for my problem, I'm afraid there's a side effect to my hard disk
i cant create partition....it just revert back to unallocated
i got a war going on in my pc now, new 8tb Firecuda randomly disconnects, i looked this problem up it tells me to disable a usb power saver in windows ive done that 8TB seems to be working good no i have another problem, the 2TB isnt even showing up no more i go to disk mangement it says the 2TB needs initializing i click that it then says "incorrect function" i cant do nothing with this 2tb drive good thing there was nothing on it and i mean nothing it was just a old blank drive i had in case i needed it its really just been sitting there doing nothing powered up looking pretty. what did i recently change for this drive to die? the usb powersettings so i went back there enabled it, good news 2TB back online? i assume 8TB problem will come back but why? what am i doing wrong? 4TB still works solid its not glitching like the others
Hi, I want to ask is it possible i got this error because my enclosure i have here can't manage the storage capacity greater than 2tb? I have existing 3.5 HDD enclosure for my 500gb hard drive but as soon I plug my 4tb hard drive in my enclosure I got this error .. I'm planning to buy another enclosure for my existing 4tb hard drive that can handle storage capacity greater than 2tb and use it for as external hard drive for personal storage but I was hesistate a bit because i might encounter another error like this again, enclosure for this type of drive is pretty expensive here so I want to make sure if that is also a cause ... thank you.
Generally this problem arise due to failure in hard disk .. if this method helps you fix the issue there isn’t any need of enclosure(if it’s cabinet as I don’t understand what enclosure is)
@@LotusGeek I already try this tutorial but it doesn't work for me it can't initiliazed due of its shown grey out Disk unknown not initialized without storage capacity on it in MiniTool Partition so I can't initiliazed or rebuild its MBR. Any idea how can i initiliazed a 4tb hdd in windows, thanks
i tried in disk mngmt but I can't also covert it to GUID or GPT, I tried also cmd nothing works it say Device is not ready, I'm losing hope on this one 😭 the hdd is not that physically damage thou
Try this one to convert :
Convert MBR to GPT without losing data in Windows 10 | LotusGeek
ruclips.net/video/E7X-6ozBUvg/видео.html
May be it will help
Am I screwed, if it says Bad disk, in the field, where is unallocated on your video? i am afraid, that i am.
Probably hard disk failure
hi my problem same but after Initialize Disk process its showing DATA ERROR (CYCLIC REDUNDANCY CHECK) what I do, please give me the solution, and with losing my data, please
Data cyclic error is related to hardware fault in hardware. Please check your harddisk health
it shows me bad disk when am trying to right click,and all the options are disabled for me,what i want to do now to bring back my drive
'
It’s means it is hardware issue. Either the cable or itself the harddisk is damaged than can be repaired
I have 250 gb Seagate hardik, I had swapped pcb and also had swap the bios. Now my hdd shows 0disk unknown not initialise. When I right click on it says to select MBR or GUID . what if I select MBR default option. Will I lose my data or it will initialise. Pls assit
You won’t loose data until you select mbr. You can choose mbr and proceed but make sure to read onscreen instructions by proceeding to each step
Hello, not showing bad disk etc.. only Disk 2 MBR 0.00 GB, right click not showing anything T.T Do you think can repair it if it's hardware damaged?
You need to go to hardware shop there are chances that atleast they can recover the data
Whenever I have a question there is and Indian guy, thanks!
My hard disk not even showing up. Disk 0 error.
Same :(
My Disk 0 i.e the Disk(internal HDD) which is "unknown, not initialized" is not showing in Mini partition tool only my SSD is visible
It’s because hdd has hardware fault. You need to replace it
Thanks man for the solution, you saved my life, cheers
I have problem that program minitool partition can even recognize my external disk, thus i cant do what you show in tutorial.
It’s hardware fault. You need to replace hdd
My disk is not showing only please help me out 🙂
Hi I downloaded the MiniTool partitions wizard 12.3 and right clicked to rebuild MBR however when I clicked on Apply, I brings me to upgrade and pay for service. How can I rebuild MBR in free version ?
It’s a free version.. if it doesn’t work try easeus partition master free version
Same with me bro
I need free version
Pls help
@ when i am right clicking , nothing is appearing so that i can click rebuild mbr.
please help me bro
Anything worked for you bro..i have same problem
Bro I also have same problem....u got any solution
Hi. I have problem that my external hdd (Disk 1) is not initialized @ Unalocatted. So how to initialize without losing my data. I wan to retrieve my data. Pls advise
This tutorial will help you out. And even if you need to format the drive you can recover the data using this tutorial :
ruclips.net/video/BPoo5bmsWoo/видео.html
i cant fix my drive, it says Bad Disk... help
me too
sir i have a problem, my hdd external is showed up in app but it's say 0,00gb and i can't do anything about it. How i solve it sir?
Mine also showing same did you solved the problem?
I tried this but it says there is too many bad clusters, what does this mean?
It’s Damaged
@@LotusGeek any hope on getting it fixed or any advice on what to do?
It’s hardware fault so only option is to recover Data by taking to hardware repair shop
I have a Disk formated in NTFS and can be read when attached to win10 box, however, when attaching it to a win server it gets in "Disk 0 unknown", downloaded "minitool partition Server Edition", fired it it even does not recognize the disk and it is not displayed in the disks list, any idea? Thanks
same here, Lotus Geek, do you have any ide about this problem? thank you
@@mikayuu9978 did yall solve it please man
Make sure you like and share with all of your friends and family this guy is doing a great job
Thank you sir 😊
@@LotusGeekapka contact number milaga sir..?
other video for recovery is not working
youtube removed it
I've 4 TB HDD, and about 3 TB have been used up, recovering these data in an unorganized order will definitely be a harder task!
This will help to recover
Recover data after formatting hard disk [pro version for free] | LotusGeek
ruclips.net/video/BPoo5bmsWoo/видео.html
@@LotusGeekvideo is not opening please explain what to doy
@@LotusGeek Can you please link to a dropbox as the Video was deleted. Or just let us know what you did on that video?
@Sunny-3 here is the new video..
Recover data after formatting harddisk
ruclips.net/video/f6AeTX1RB8A/видео.html
@@LotusGeek Thank you ji
Nice bha bhai
I like you bro ek number trick tha bhai bhai aap to Mera dil khush kar Diye aage badhte raho bhai Jindagi Mein aap
Dhanyawaad bro 😎
TERIMA KASIH. Thank you. SANGAT MEMBANTU. very helpful.
SEMOGA TUHAN YESUS MEMBERKATI ANDA & KELUARGA ANDA.
May Lord Jesus bless you & your family.
Salam dari kota Manado (Indonesia)
Greetings from Manado City (Indonesia)
salam dari pekalongan jawa tengah
It's not working it can't even allow me to press the right button ,is it because I'm using the free package ???
No it’s not about free version. Your disk has hardware issues
hi dear can you help me my 1TB WD external hard not show in my pc .
so how can i fix this issue ?
I have the same issue on WD
I have the same issue on Seagate
i received,,, not initialized hard encountered error
don't know what's major issue bcz unable to fix this issue with said software's also (MiniTool partition wizard) (EaseUS partition)
Please check your connected cable. It shows the problem is with hardware whether it’s connection or itself the Hrd disk
how to fix the right-clicking in minitool app?
when i am right clicking on disk nothing is happening please solve my problem
I tried this but it's not happening. My rebuild is not working
cant rebuild mbr because it says that it’s a bad disk
Probably the issue with hardware
sir your recovery video deleted can u help me to solve this
It was removed by RUclips ..now Working on it.. soon share new video..
Thank You so much bro you are a life saver !
Happy to help
my hdd is showing bad disk and cannot open any other options if i right click
It’s hardware fault. You need to replace it
Can right click on the disk 2, that means what? Hardware issue?
No that doesn’t mean you have hardware issue. If it’s not showing at all then it’s hardware issue
I installed ssd and before that i removed hard disk after installing ssd i not able to use hard disk using hard disk casingi
Idont need data i want my hard disk space
I can use hard disk after removing ssd
It is working fine
But i cany use it with ssd in which os is installed
Showing External disk 2 MBR bad disk....Any chances to recover data
Try this :
ruclips.net/video/BPoo5bmsWoo/видео.html
bro my hdd 500GB showing in this app it's 0.00GB and am unable to right click because it's showing 0.00gb, is there any other method to format and show my hdd bro...
please 🙏 help me bro so much official data is there on my hdd.....
same did you fixed it?
It's not showing up in application but in showing on disk management
SAME BRO if you fixed it please gimme a link on how
wait its reverse for me not showing up in application only on disk management
I can't select rebuild MBR option. Kindly advise me
What’s the issue?? Is it highlighted? Try with easeus partition master free version
@@LotusGeek Right-Clicking on the bad drive in Minitool Partition Wizard is not giving me any options. What can I do now?1:50 when I am right-clicking, nothing is appearing so that I can click rebuild MBR.
please help me, bro. (this problem is with everyone sir .. could you please help us.. because I store my class meetings there and now I cannot study .. please help me
same problem here please help
@@LotusGeek same problem I can’t click on the right bottom so it doesn’t show the option to rebuild
Hey guys if find the solution please share it with me .
Stuck on pending operations on rebuild MBR. =(
How long were you stuck?
the disk doesn't even show ,tho i used ease us
i can eject the disk from the windows menu but i don't have access to it , what can I do pls
Either to cable are not working or it’s a harddisk fault.
@@LotusGeek I'll have it checked thank you
Disk 2
MBR
0.00 GB
Can we get same size data back to drive ??
Wow,it worked..got the right vedio, Thanks man❤️
All is working as per your video , but at end the drive is not getting formatted , it remains the same after the format command ... Can you help this
Either pd is faulty or else it may have a switch to lock/unlock and currently it’s in lock state
Either pd is faulty or else it may have a switch to lock/unlock and currently it’s in lock state
Not work, i download these application but my second disk can't detect in these application and i cannot fix it😭
Did y fixed it?
sir my seagate 2tb hard disk showing only 128gb beeping sound
It’s hardware fault
My Disk Is Showing in Disk management
But Not Showing in mini tool 🙄 sir Plese Help me
It’s hardware fault
Dear Sir
I have downloaded the mini tool , but my hard has been labeled with it as a bad disk, and I was not able to rebuilt the MBR. I hope if you would like to guide me in order to resolve this issue
Kind Regards
Sorry to say but It’s hardware fault
@@LotusGeek Thank you for your response, but I hope if you would like to tell me if there is still a chance to restore my data
Try easeus data recovery software.. if it’s readable there are chances to recover data..
mini tool partition software not showing corrupted hdd
1:50 when i am right clicking , nothing is appearing so that i can click rebuild mbr.
please help me bro
That means The hard disk is physically damaged. You might hear a clicking sound when you plug it. And that's a bad sign
THANK YOU!!! IT WORKED 🙂
Sir meri hard disk kahi bhi jagah show nhi kr rhi he plzzz help data to nhi loss hoga na plzz sir koi meri help mera wedding sesone ka shara data usme hi he
Sorry to say lekin aapki bato se lgta h hard disk krab ho gyi h.. lekin data recover ho jaega.. kisi ache PC repair shop p dikhao..
I hv tried my all best my couldn't recover the data . Can u pls hlp me bro by connecting wid me via team viewer .
Sorry bro team viewer can’t support.. privacy and security issue
Use this to recover data:
Recover data after formatting hard disk [pro version for free] | LotusGeek
ruclips.net/video/BPoo5bmsWoo/видео.html
The app asks to upgrade to paid version in the last step when you want to recover your data. It is very expensive and of no use after datarecovery. Not useful for me. !!
Bhai yh software, Licence key mang rha h,
Free nh h yh,
License ket dedo,
Or software version jo ho uska link bhi,
With license key
COULD NOT BE PERFORMED BECAUSE AN I/O DEVICE ERROR AA RAHA HE
rebuild mbr with aomei is useful when fix this issue
Not working
Can we do initialise disk and create partition through disk management rather than this tool?
Yes you can if it’s working in disk management
@@LotusGeek thank you for the prompt reply.
After rebuilding mbr disk shows as 'bad disk'
meri hard disk is app me show ni ho rhi sir or masla yehi apka wala hai.solution btao koi
Try with the minitool partition wizard by changing the USB port of your attached hard disk
It says (Bad Disk). Dies that mean the HDD is dead? Thanks
Yes..
Thank you sir. it worked for me
how to recover, step 3 video is removed ?
Minitool shows my external HDD is ( Bad disk ). Couldn't right click
Sorry to hear that .. I guess it’s damaged sir it’s a hardware fault
Also fixed with aomei tool, rebuild mbr is helpful.
doesn't work
Bro its not showing my ssd help me
same for me☹
In my stage there is showing bad disk 😫
@Lotus Geek my hdd is not showing in this software what should i do
?
Hardware damaged.. replace hdd
@@LotusGeekIt's only 2 years to my laptop hdd and it got corrupted 😢
Sir if it’s 2 yes you can claim the warranty and they will recover your data too. Head over to their service centre
@@LotusGeek it's laptop hdd and my laptop is out of warranty 😓, so the hdd still remains in warranty??
It depends at the time of purchase. You can confirm from the service centre
mine, appears as "Bad Disk", and doesn't let me do anything, any tips?
Harddisk is damaged
@@LotusGeek so there's nothing we can do about it?
Can I use this step 1 without purchasing premium?
Yes you can
I can't see my 1tb written. It's showing 0.00kb
Hdd is damaged
Right-Clicking on the bad drive in Minitool Partition Wizard is not giving me any options. What can I do now?1:50 when I am right-clicking, nothing is appearing so that I can click rebuild MBR.
please help me, bro. (this problem is with everyone sir .. could you please help us.. because I store my class meetings there and now I cannot study .. please help me
Use windows 10 bootable usb and give boot using it. Now choose the option “repair your PC” after that choose troubleshoot > advanced options > cmd
Type the following command and hit enter:
Bootrec /fixboot
Bootrec/fixmbr
Bootrec /rebuildbcd
If one of the command gives you the error “access is denied” type :
Bootsect /nt60 sys
Same problem
@@LotusGeek can't understand
Right button is not working sir 0.00 GB showing
Your harddisk is damaged. Hardware issue
it says bad disk and no option is available :((
Sorry to say but your harddisk is damaged