Here's a little tip for anyone trying to thread either a new Break Line or Clutch Cable (more applicable to clutch cables but whatever). Once you have your Clutch cable detached at both ends, use a Cable Tie or "Zip Tie" to tie one end from your old to one end of your new cable together, then simply just pull, gently swaying back and for to give it a bit of a wiggle, the cable will follow your new cable perfectly through all the cracks, gaps, holes and crevices that are in the way without having to remove fairings or other parts of the bike. Just bare in mind that you may have to still remove a small metal clip that is often used to keep all your wiring together however, this generally is accessible and takes little effort to remove and replace. 👍 ♥ Just a side note this may not be applicable to ALL bikes, I know for a fact that it works with Yamaha, Kawasaki, Triumph (Daytona models), KTM and Aprilla however I can't be sure about Ducati or Harley. Anyway I hope this helps some people.
sorry to be so offtopic but does anybody know a way to get back into an instagram account..? I somehow forgot the account password. I would love any tips you can offer me
@Bishop Gianni Thanks for your reply. I got to the site through google and I'm waiting for the hacking stuff atm. Takes a while so I will get back to you later with my results.
Thank you for making actual ride review on these lines have been looking for this for a while
6 лет назад+4
User manual says to replace the rubber brake pipes every 4 year, so they remain relatively stiff. However once you change to steel pipes you'll immediately notice if you sit back on a bike with rubber pipes. For example I have the steel pipes on mine, and a few weeks ago I tested the 2018 MT-10 and MT-09 and both have rubber pipes, and the whole brake-feeling was just so bumpy. I felt like the brakes are not precise enough. So yeah, if anyone asks me the steel braided pipes are must haves :) cheers
Thanks bro I knew there was an interval where you had to replace them but I couldn't find it! But it's definitely needed every few years because after 10 years it's a bit too long lol!
1:47 i can confirm that my 2017 R6 came with stupid rubber brake lines... such a pity since it wouldn't be that expensive for them to put on some steel braided ones stock
Well I get your point but it actually is very expensive for them. Let's say those brake lines cost about 20$ per bike more.. now do that x50000 units. $$$$$$$$$$
Bleeding dry system is easier when done from bottom up. Attach a hose to to caliper bleeder valve and use a syringe to push fluid upwards. You don't have to do it perfectly, just enough so the system is primed with brake fluid. After that bleed the brakes conventionally.
This is not true. Alot of triumphs, ducatis, KTMs, and aprilias still come with rubber lines. What are you on about? Yes steel braided lines are way better, but plenty of manufacturers still put rubber lines on their bike.
@@K12-n5l Black doesn't mean rubber, metal braided lines are also black. Maybe you talk about 125cc or scooters, that could be. But majority are metal, you recognize first from lever feeling and terminals. Even the Chinese companies are using metal braided lines and they are actually starting from zero!
i was thinking of getting them on the 2018 cbr500r of mine just for the hell of it, the brakes on the cbr usually gets the worse opinons that theyre weak so i might give that a go, its a single front brake disc as well so it shouldnt break the bank.
I understand...With more powerful brakes, you can go faster at a turn and brake shorter. Yes. You will be faster overall. [PS Note: Yamaha recommends replacing brake hoses every four years] (i replaced the brake lines and the radiator hoses, all at once.)
It's not complete until you put a Brembo RCS19 master cylinder on too. The upgrade was as noticeable as removing the PAIR Valve (massive engine braking upgrade).
Agreed, made such a difference now that with some adjustment i can stoppie with one finger 🤣. Huge upgrade for the track when it comes to precise braking and finesse while cornering
Next change: bring back your mirrors bro. Those bar ends look cafe racer and totally stand away from the look of the bike. Besides mirrors are so important I can't even think of riding without both of them. Please bring the mirrors back man! Looks really noob without them. Additionally you could get indicator mounted mirrors or something which looks futuristic.
I know man they look awful but I scrubbed them for hours with the Harpic method and sanded them and they still look terrible! Makes me sad every time I see them lol. But thanks bro you should definitely do it, it was way better value for money than I expected!
Top job brother 👏👏 the Hell braided lines look awesome 😉 especially in the red to match your bike and they definitely do make a difference I can vouch for that as ive got them on my Daytona 675R so yup definitely a great mod for any sports bike. I've said it before and I'll say it again I 💯 think you should powder coat your rims red imo it would definitely add sex appeal to your R6 for sure other than that cosmetically its 🔥 bro
Thanks Adam I'm loving them! Out of curiosity does the Daytona come with steel lines or did you do it yourself? And I'm always thinking about your suggestion of powder coating the wheels but I've photo shopped it and with the red mudguard and fairing decals I think it would be too much red. However I've contemplated removing some of those red pieces to get red wheels lol
Chaos Causes the 675R comes stock with braided lines BONUS!! You could always rewrap your front mudguard black instead then the red wheels would look 🔥against the black 👌
Chaos Causes absolutely that's why imo the Daytona 675R is super sports class leader as it comes with so many extras as stock. Brembos front and rear with ABS and braided lines quick shifter fully adjustable ohlins carbon bits slipper clutch and more no other super sports comes near atm
Bonito RIDES by the way here are my xrms mods crank shaft is balanced cams changed flywheel lightened bored up to 70mm carb 30mm etc. nahh you get the point.
Here's a little tip for anyone trying to thread either a new Break Line or Clutch Cable (more applicable to clutch cables but whatever).
Once you have your Clutch cable detached at both ends, use a Cable Tie or "Zip Tie" to tie one end from your old to one end of your new cable together, then simply just pull, gently swaying back and for to give it a bit of a wiggle, the cable will follow your new cable perfectly through all the cracks, gaps, holes and crevices that are in the way without having to remove fairings or other parts of the bike. Just bare in mind that you may have to still remove a small metal clip that is often used to keep all your wiring together however, this generally is accessible and takes little effort to remove and replace. 👍 ♥
Just a side note this may not be applicable to ALL bikes, I know for a fact that it works with Yamaha, Kawasaki, Triumph (Daytona models), KTM and Aprilla however I can't be sure about Ducati or Harley.
Anyway I hope this helps some people.
Magmatic Miniatures big ups for that tip mate!
Do the same during chain replacement
sorry to be so offtopic but does anybody know a way to get back into an instagram account..?
I somehow forgot the account password. I would love any tips you can offer me
@Kole Melvin Instablaster :)
@Bishop Gianni Thanks for your reply. I got to the site through google and I'm waiting for the hacking stuff atm.
Takes a while so I will get back to you later with my results.
Thank you for making actual ride review on these lines have been looking for this for a while
User manual says to replace the rubber brake pipes every 4 year, so they remain relatively stiff. However once you change to steel pipes you'll immediately notice if you sit back on a bike with rubber pipes. For example I have the steel pipes on mine, and a few weeks ago I tested the 2018 MT-10 and MT-09 and both have rubber pipes, and the whole brake-feeling was just so bumpy. I felt like the brakes are not precise enough. So yeah, if anyone asks me the steel braided pipes are must haves :)
cheers
Thanks bro I knew there was an interval where you had to replace them but I couldn't find it! But it's definitely needed every few years because after 10 years it's a bit too long lol!
Should have just drained all the fluid from the system so that you can have air brakes :O
I upgraded to steel braided lines in my CBR so that my angry ex girlfriend can't cut them through :-\
if its not your brake lines its something else she'll be cutting
1:47 i can confirm that my 2017 R6 came with stupid rubber brake lines... such a pity since it wouldn't be that expensive for them to put on some steel braided ones stock
Thanks for verifying that with me! It is a shame and an odd decision by Yamaha but not too difficult to fix.
Chaos Causes yeah indeed an easy fix and definitely the first mode one should consider. So much better feeling on the brakes, plus no brake fade
Well I get your point but it actually is very expensive for them. Let's say those brake lines cost about 20$ per bike more.. now do that x50000 units. $$$$$$$$$$
@@michaell837 How much and where did u get them as i'm based in polokwane and u cant get anything out here?
Bleeding dry system is easier when done from bottom up. Attach a hose to to caliper bleeder valve and use a syringe to push fluid upwards. You don't have to do it perfectly, just enough so the system is primed with brake fluid. After that bleed the brakes conventionally.
wym?
24 years on OEM rubber lines, no problems here but I will upgrade them this year.
Great video, really well made and great music - thanks
I have hel brake lines on my xj6 for more than an year and it's been flawless!
That’s great to hear man the fact that they offer a lifetime warranty says a lot of the their product!
In Europe all european bikes have metal braided lines, Rubber lines should be illegal and only for bike with 50cc engines
This is not true. Alot of triumphs, ducatis, KTMs, and aprilias still come with rubber lines. What are you on about? Yes steel braided lines are way better, but plenty of manufacturers still put rubber lines on their bike.
@@K12-n5l Black doesn't mean rubber, metal braided lines are also black. Maybe you talk about 125cc or scooters, that could be. But majority are metal, you recognize first from lever feeling and terminals. Even the Chinese companies are using metal braided lines and they are actually starting from zero!
Even if you have a newer R6, changing those lame rubber hoses to steel braided lines makes a world of a difference.
Beautiful! That color adds to the overall beauty of your bike Chaos!
I completely agree bro they go so well!
Very simple and lucid explanation.
Thanks dude I'm glad to hear that!
I get to learn many new things from you dude thank God that I found your channel long ago😍👍
That's awesome to hear bro thanks for watching!
i was thinking of getting them on the 2018 cbr500r of mine just for the hell of it, the brakes on the cbr usually gets the worse opinons that theyre weak so i might give that a go, its a single front brake disc as well so it shouldnt break the bank.
It should definitely make a difference especially with the single disk!
I understand...With more powerful brakes, you can go faster at a turn and brake shorter. Yes. You will be faster overall.
[PS Note: Yamaha recommends replacing brake hoses every four years]
(i replaced the brake lines and the radiator hoses, all at once.)
These looks amazing and i m Sure they performed even better. I think i need these
They sure do man and I think you definitely do they're my new favorite mod lol!
IVE SEEN GLOW IN THE DARK BRAIDED CABLES BY GOODRIDGE 💯👌🏼
That would be sick riding around at night!
It's not complete until you put a Brembo RCS19 master cylinder on too. The upgrade was as noticeable as removing the PAIR Valve (massive engine braking upgrade).
Agreed, made such a difference now that with some adjustment i can stoppie with one finger 🤣. Huge upgrade for the track when it comes to precise braking and finesse while cornering
these brake lines made ur bike even sexier
Thanks dude I agree they look amazing!
quick bleed screws ftw!
GOOD VIDEO THANKS FOR THE HINTS AND TIPS 👏🏼👏🏼💯🇬🇧
good job!!, works and looks so good
Thanks so much bro they sure do!
Next change: bring back your mirrors bro. Those bar ends look cafe racer and totally stand away from the look of the bike. Besides mirrors are so important I can't even think of riding without both of them. Please bring the mirrors back man! Looks really noob without them. Additionally you could get indicator mounted mirrors or something which looks futuristic.
Service schedule says to replace master cylinder and calliper seals every 2 years.
H - E SINGLE L...
Do you know the lenght of yours new brake fluid lines?
Polish your headers :-). The brake lines look awesome been considering it for my bike.
I know man they look awful but I scrubbed them for hours with the Harpic method and sanded them and they still look terrible! Makes me sad every time I see them lol. But thanks bro you should definitely do it, it was way better value for money than I expected!
Watching you freaks me out. I keep on forgetting that you are not in the states and the lanes are reversed.
Hahah next video I’ll ride on the other side for you!
Wonderful song
In your opinion whst should one pay for a secondhand 2009 r6
Great video bro.
Thanks dude!
Hey dude, where did you buy the kit from?
Or did you have it imported?
I got mine from superbike accessories online shop. They were fast and efficient!
I Seen some videos in my search that says 3-5 years we should replace them. Thus my wallet will open to steel braided 👌
Where in South Africa did u order the Hel lines from?
Top job brother 👏👏 the Hell braided lines look awesome 😉 especially in the red to match your bike and they definitely do make a difference I can vouch for that as ive got them on my Daytona 675R so yup definitely a great mod for any sports bike. I've said it before and I'll say it again I 💯 think you should powder coat your rims red imo it would definitely add sex appeal to your R6 for sure other than that cosmetically its 🔥 bro
Thanks Adam I'm loving them! Out of curiosity does the Daytona come with steel lines or did you do it yourself? And I'm always thinking about your suggestion of powder coating the wheels but I've photo shopped it and with the red mudguard and fairing decals I think it would be too much red. However I've contemplated removing some of those red pieces to get red wheels lol
Chaos Causes the 675R comes stock with braided lines BONUS!! You could always rewrap your front mudguard black instead then the red wheels would look 🔥against the black 👌
Great reason to get a 676 then! And exactly so I’ll play around with more ideas
Chaos Causes absolutely that's why imo the Daytona 675R is super sports class leader as it comes with so many extras as stock. Brembos front and rear with ABS and braided lines quick shifter fully adjustable ohlins carbon bits slipper clutch and more no other super sports comes near atm
Does anyone know the line length for 09 r6? Trying to order from core moto
Hello, i hope you won't be mad because i will be using some of this video to make a compilation video also i will credit you on my video. Thank you
You CANNOT use my video.
I love your vids keep it up
Thanks mate appreciate the support!
It does look beautiful but still i can't believe my moded xrm125 smoked an r3lol
Haha it's all in the rider a lot of the time!
Vince Elesterio weh di nga
Bonito RIDES wanna bet?
Bonito RIDES by the way here are my xrms mods crank shaft is balanced cams changed flywheel lightened bored up to 70mm carb 30mm etc. nahh you get the point.
Vince Elesterio idk, not trying to argue paps. Pero 190+ top speed ng r3 stock palang yan, so I doubt..
Nice mod
Thanks dude
Nice 👍🏾
Thanks man!
That hat! 🤣🤣🤣
even after 10 years your bike is rustless
Yip luckily the only rust is on the headers but those are junk anyone and need replacing!
Chaos Causes as u say that you wash it daily or something how do you protect it from rust ???? can u help me out here
No I just keep it clean and am lucky to live it good conditions
price of hoses
+-$150
You put them in the wrong way around
U.U
Haha creative
OwO maybe ¯\_(ツ)_/¯
:)
(: