Adjust Your DJI FPV Controller For Manual Mode
HTML-код
- Опубликовано: 11 окт 2024
- This DJI FPV throttle adjustment tutorial will help you to fly smoother with better throttle control.
Like the music? Epidemic Sound makes your first month FREE!
www.epidemicso...
This hustle is living out my dreams. Like what i do?
Consider buying me a coffee then:
www.buymeacoff...
=========================================
AFFILIATE LINKS: Purchases through them will support me through commission, and that in turn helps me pursue this passion and grow this channel further. Thank you in advance!
=========================================
DJI FPV Combo 4K 60fps FPV Drone
bit.ly/DJIFPVC...
DJI FPV Goggles V2
bit.ly/DJIFPVG...
DJI FPV Battery Charging Hub (OEM)
bit.ly/DJIFPVB...
DJI FPV Original Propellers
bit.ly/DJIFPVP...
Aikon Prop Adapters for DJI FPV
bit.ly/AikonPr...
Gemfan 5236-3 Hurricane Props
bit.ly/Gemfan5...
Actioncam 3D Printed Head Mount for DJI FPV
bit.ly/Actionc...
iFlight Colorful Head Strap for DJI FPV Goggles V1/V2
bit.ly/iFlight...
Sunnylife Headband Battery Holder for DJI FPV Goggles V1/V2 OEM Battery
bit.ly/Sunnyli...
Insta360 One X2 5.7k 360 Panoramic Action Camera
bit.ly/Insta36...
Insta360 One X2 Sticky Lens Guards
bit.ly/Insta36...
Insta360 One X2 Battery Fast Charge Hub
bit.ly/Insta36...
Cynova Audio Adapter for Insta360 One X2
bit.ly/Cynova3...
Insta360 GO V2 1440p 50fps Thumb Cam
bit.ly/Insta36...
Sunnylife ND32 Neutral Density Filter for Insta360 GO V2
bit.ly/Sunnyli...
GepRC GoPro Hero 8 Naked
bit.ly/GepRCGo...
GepRC GoPro Hero 8 Naked (DIY Kit)
bit.ly/GepRCGo...
Rode VideoMic NTG
bit.ly/RodeVid...
========================================
========================================
SUBSCRIBE for new episodes every Tuesday (9pm Singapore, +8 GMT)!
/ thereelrahim
LET'S CONNECT:
Gmail : ayimmech@gmail.com
Instagram : / thereelrahim
And pilots as always, I'll see you IN THE SKIES!
#djifpv #djifpvtips #djifpvtutorial
Question can the throttle be switch to the right stick instead of the left stick and loosen the springs on the right stick instead of the left
Yes, by default is left stick for throttle which is Mode 2. You can switch to Mode 1 in the goggles menu, making everything flip to throttle right. Then you can tighten the right side F2 fully (finger tight is fine). This would loosen the sticks till there is almost no more spring tension in your throttle. Then screw in F1 to give the desired friction that you need. Hope that helps.
Just what I'm looking for. I'm new to fpv and also more used to have the throttle on the right hand stick. So it's possible too in Manual mode / acro to have the throttle on the right hand side?
yep@@Vinbenzine
@@Vinbenzine yes, as described above
@@Vinbenzine throttle on the right side? What an abomination
By far the best video on how to adjust the joystick. Was going crazy before this 👍
Tanks man, hope it works out well for you. Fly abit, and you will notice if you like the F2 to be more or less friction. More is ok for smooth flying, but i prefer less for freestyle as you will need to bleep the throttle quite often. So its a matter of preference. Just bring the tool along on the field.
agreed, even told us what MM to use, unlike all the other douche bag wastes of time , well one sir !! and thank you
Bro what a life saver this video is! Only tightened F2 and thought this isn't be great to fly in manual. Cheers and fly safe!
Thanks for watching! Tighten F2 till finger tight in order to loosen the spring tension, then add F1 as "friction" to what you are comfortable with flying. Try it out and hope it works out for you.
Thank you good info! I like that you go straight to the subject and not these long intros!!!!!!!!!!
You're most welcome. I guess its subject focussed. Some topics do need a lengthy intro to get e stage right. I am guilty of 20min episodes 😅
Fantastic video! I watched another who suggested adjusting in a different order but couldn't get it to feel right at all. Your method of shaking the stick was perfect!
Its odd, but gets e job done 😅🤟🏽. Just remember that the friction in F1 is very dependent on user preferences. Like if u wanna fly smooth, u may want more friction, but u may want looser for freestyle throttle blipping. Find a sweet spot, and it will make for an enjoyable flight experience. See u in the skies 🤟🏽
I have the DJI FPV and been wanting to fly in super sonic mode..lol glad I saw your video on how to change the stick control...Thanks
Sorry I missed this. You're most welcome! Hope the journey has been smooth for you. I get what you mean. For N and S modes, the speeds are so limited and only M mode will give you max pitch and top speed. Soar the skies man! Do feel free to ask any help anywhere in the comments and I'll respond in kind. Till then, enjoy the journey and I'll see you in the skies!
Excellent Explanation, Thank you!
HD and higher resolutions are being processed. Its been 4h....just one of those days. Enjoy the episode!
i am here 5 months later and i can confirm its hd now
Lol! Thanks. Was really worried cz it took YT too long. Lesson learned, upload earlier before premier date ✌🏽
@@TheReelRahim as someone starting a new RUclips channel I'm finding that the biggest hurdle is actually RUclips lol. Adobe Premier Pro is kind of a pain too. Is that the editing software you use or do you use something better (easier)?
Wow straight forward explanation....... excellent video!
This was really useful to me in 2024, thank you for the video.
Very helpful, I’m not flying manual mode yet but wanted to add a little more Trenton our resistance to my controller. Thank you again
Im actually very glad to hear. As most just want to adjust for Manual mode, but yes one should also tune the tension for personal preference. Fly safe!
Great explanation! Love when it is concise and not too much info. I just got my DJI FPV and am so excited. I will be releasing a video soon!
Have a safe flight friend 🤟🏽. Take your time, there is no need to rush into Manual mode. Binge on my DJI FPV episodes, and hope they help if u r new to FPV 🙏🏼
How should I tighten my sticks for the best flight? My right stick controls throttle and yaw. Left stick controls pitch and roll. I currently have recentering disabled on both, and left stick slightly looser than right.
Oh man, thats something for my head to get around. 😅. So likely u are Mode 1 pilot. I cant really say how much, coz its more of pilot needs. Like for me (Mode 2, throttle left), i need my throttle without any spring tension (fully tighten F2), but i need some friction resistance (add F1). And i will add or reduce depending on how i feel the controls are working with me in flights. So advice is, the sweet spot for me is enough resistance for the whole throttle range, but not too much that it gets difficult and tiring when i do throttle bleeps. Maybe this could be your guideline. Hope that helps
@@TheReelRahim Thanks so much, that does help a lot. Only thing I'm wondering now is: How do you have the other stick set (not the throttle stick but the other one), and what does moving that stick side to side control--yaw or roll?
Glad it helped ✌🏽. For clarity in MANUAL Mode :
Left stick
Up/down - Throttle
Left/right - Yaw
Right stick
Up/down - Pitch
Left/Right - Roll
Yours?
Thank you. Superb! Greetings from Czech republic.
Thank you for that explanation, I was so confused why it was telling me to unscrew and screw those threads.
Glad to hear. The F2 is the easy part but adding friction with F1 is really a personal preference. I prefer abit of friction so that my throttle blips are in control.
Thank you for a simple and clear explanation! This really helped me.
Following you from Africa 🙏🏾
Thanks and see you in the next one!
Great video, thanks! Tried doing this on my own, but couldn't get it the way I wanted. Now it's perfect.
Sorry I missed this. You're most welcome! Hope the journey has been smooth for you. Do feel free to ask any help anywhere in the comments and I'll respond in kind. Till then, enjoy the journey and I'll see you in the skies!
Thanks fot this! I was using it in Liftoff Simulator and couldnt not understand why it was zipping straight up 😂😂
Love your channel and I love your accent! I could listen to you all day
hahahahah thanks! As a fella that edits my own episodes, IM SICK OF LISTENING to myself. hahahah
Great video. I just got an Avata and the Controller 2. Thank you so much. This helps me a lot.
Sorry missed this. Glad it helped mate. Its fine to fully screw in F2 to release spring tension, but slowly screw in F1 till u get the desired friction.
Thanks Bro Im going to fly AVATA 2 now Im so stoked ! very nice video
Great video! I just did this on my Controller 3 because I forgot how I did it on my Controller 2 a few years ago lol
Hey brother, thank you for these helpful videos. You have a couple of videos that others have not covered much about this FPV system. Thank you!!
You're most welcome. I realised that, but i also foresee that this will still be the only COMPLETE KIT out there that can help everyone get into FPV. And so theres my investment, and i hope to get more into FPV. Im sure many will grow and get into DIY eventually. That all good news 👍🏼👏🏼
Just don’t understand why we have to loose the controller stick? What if we do not do that in manual mode?
Hello Rahim, I have just purchased an Avata and I plan to do indoor fly-through videos often with normal mode and horizon lock. I need to keep one constant pitch (speed) for the entire flythrough as I can always do the speed ramps in the post. I believe Throttle and Yaw are the ones I would need to keep moving. And as I am more comfortable with my right hand, I plan to switch to mode 1 so that these two, switch to the right side and then follow the steps you mentioned here to tighten the left control which in my case, would be for the Pitch. Is this right or there is something I am missing? Thanks a ton.
Thanks thats what i needed. I was asking myself what the F2 Stick error on my screen was
Glad that helped. Safe flights mate!
Thank u very much for this tutorial sir Rahim, and u got a new subscriber, cheers!🙂
I follow the instructions on your video and its being easy to fly on manual mode but i have a question how did you get the remote controller control stick error warning off the screen?
Sorry I missed this. Glad the instructions helped u. For the error, it appears once awhile and I will go into the controller settings in the goggles and do a calibration. It will go away and I'll just repeat the process if it comes around again. Just takes a minute.
Made me laugh bruh "i know youre eyeing the bling here" i was 🤣🤣🤣
C'mon keep focus everybody! Watch e next episode for its review ✌🏽
thank you for sharing information friend. that was quick!
thanks for this info. I kept messing this up and I got your vid on this and with your perfect explanation I got my sticks set properly.The DJI literature really messes this up.
Yea that was the problem. Messed mine up too, and so made this to make it easier for others to adjust theirs.
Thanks for the tutorial. I want it just like my tango2 controller, this explains it.
You're most welcome, and glad to have helped! So its clear that you are DIY drone pilot too, and having the throttle feel just right is important for our throttle control and blipping. Tighten F2 till finger tight in order to loosen the spring tension, then add F1 as "friction" to what you are comfortable with flying. Try it out and hope it works out for you.
Hi, Nice video, After I changed the movement on the left Stick as you demonstrated, I realized that it takes a little longer to raise up the Drone in the Air, is it Normal? or there is a way to increase the Truttle. Thanks
Hi, how to stoped motors from controller?
Hi, this is for Manual Mode:
1) Not Updated:
- Right side of controller, press 'Start/Stop'. Maybe need to press twice, sorry cant remember as i have updated firmware.
2) Updated to latest Firmware:
- in goggles at Contoller Settings, set 3-way switch. Of the 3 positions, 2 will be OFF, one will be ON
- I use this as its common for me as a DIY FPV pilot to use switches instead of buttons to ON/OFF motors.
Remember that u need to bring throttle to 0 before switching ON motors, but to switch off, it doesnt matter throttle position. BUT that means drone can be switched OFF even while flying
Thanks man! Took me 1 min to do after your explanation!
Great to hear. Could have been a short tutorial, but just needed everyone to understand and hope they would find their own preference in the setup for M Mode. Feel free to drop by again and ask anithing through your journey. See you in the skies!
Many many thanks for your Videos my Friend 💪🏽
You're most welcome and great to hear from you again! Thanks for watching, and do leave a comment anywhere if you have questions and Ill help as soon as I can!
@@TheReelRahim Thanks my Friend, the Videos from you is a Big help for me to learn better to Fly. I make my first two Flights in M Mode 🤗you can see on my Channel. but i fly very slow for safty and i dont want crash 😂
Hello, nice video, what is the reference for your custom sticks?
Awesome vid , cut straight to the point !
Thanks! Hope it helps. See you in the skies!
Really helpful video was struggling with this. thanks a lot!
You're most welcome. Hope you find a feel for the sticks that suit you best. See you in the skies!
Excellent I followed your example perfectly, works GREAT,, Thanks
Great to hear, and you're most welcome. Add/reduce friction according to your flying needs. its more of a feeling, then a definitive answer as its purely up to pilot preference. Do give it a try and hope that it goes well for you. Fly safe, and as always I'll see you in the skies!
With this manual modification will the normal and sport mode be alot different to fly in or easier? Will the drone still hold its gps lock still with the modification?
Quick and concise tyvm!
Thank you for showing me this! Great video !
You're most welcome! Get a feel for what works for u. Its always easy to reset. Stay safe in the skies🤟🏽
Thank you, you explained it really well.
Sorry I missed this. You're most welcome! Hope the journey has been smooth for you. Do feel free to ask any help anywhere in the comments and I'll respond in kind. Till then, enjoy the journey and I'll see you in the skies!
Do you need to loosen the other one (right joystick) too or does it need to stay self centered?
Great video! Thanks Rahim
You're most welcome. Thanks for watching. See u in the skies mate 🤟🏽
Thanks for keeping it short!!
You're most welcome. Thanks for watching! Tighten F2 till finger tight in order to loosen the spring tension, then add F1 as "friction" to what you are comfortable with flying. Try it out and hope it works out for you.
Good evening my friend, all your videos are amazing!!!! I want to ask a question. . . should we do this and NOT fly in manual mode? If we have decided to fly only in sport mode, do we have to tighten the screws as before? Thank you very much
Sorry i missed this. PERFECTLY FINE. The only difference is that you will not have the drone easily hover in place in N and S modes. No need to re-tighten the screws. Just estimate the position of the throttle if you are in goggles. If you see that the drone is nicely hovering in place, then all good. There is quite a tolerance in the centre of the stick in N and S modes, so there is no need to be pin-point accurate to get it hovering in place. Hope this helps
Hi there what king of screwdriver u use …Phillips flat
The man ! Loved the video!
You're most welcome friend. There is no perfect setting, so you would have to try it out (especially the friction feel), to whats best for your needs. Stay safe in the skies!
Thank you for this clear explanation. 😀
Your most welcome! Depending on your style of flying, you may want more friction with F1. Personal preference. Fly safe!
Hi Rahim, Appreciate your hard work. Really nice content. I am a beginner into FPV and wanted something cinematic to fly so decided to get the dji Avata fly more combo with the dji fpv controller 2. One doubt that I have, the controller has Normal, Sports and Manual. If I loosen the screws behind the controller now, then if I want to fly in normal mode can I fly or do I need to redo what I did.
Hi and thanks for watching the episodes! Hope they have sufficiently helped you get to the skies safely. You do not need to reset the screws. You can fly N and S just fine. Go ahead and give it a try. Just that now, you will need to manually bring the throttle stick back to centre EVEN while you are in goggles . Remember that in N and S modes, that stick is Altitude control. So just adjust high or low till you begin hovering, and that will be where centre is. Eventually you will not care anymore and just wanna maintain hover and ur good to go.
@@TheReelRahim Thanks alot Rahim. One more question, I also wanted a radio to use with ELRS so was confused whether I should go in for Radiomaster Zorro or Jumper T Pro. The T Pro has a 1 Watt ELRS while Zorro is locked at 250 mw.
Don’t know if you said, but what are you using to tighten the controller F1 and F2
If I often switch flying from normal to manual mode, is it still recommended to adjust the throttle stick to not be springloaded? When it's springloaded I struggle with it when flying manual, but is the drone still nice to fly in normal or sport mode with the throttle not being springloaded?
Its not as nice definitely without spring load, but i know in N and S modes, i can afford to make late adjustments in flight. Id rather have no spring load in Manual mode as there is little tolerance for mistakes, and so ill need e best reactions on the sticks. Also if i the pilot had an emergency, i could always drop e throttle and let it crash. If it auto spings back to centre, its gonna send e drone thats still in Manual mode TO THE MOON 🤣
Can you make a tutorial on how to get the remote back to it's default setting after I've screwed the back of it for manual flight.I mean how I can get the the screws to such a point where the sticks will go back to the center as it did right out of the box. Thank you
Actually just loosen both the screws until you do not feel resistance in the screw threads. Careful with that as you do not want to fully unscrew the grub screws until they fall out. Just enough till you get the sticks back to self-centering. Hope that helps.
Thanks, perfect explanation
You're most welcome. If u run into any issues, do feel free to ask so we can help u out ✌🏽
I've just finished setting up my RC2 on 2x O3 equipped quads. Thanks for the vid, worked perfectly.
BUT, where did you get those longer sticks? I gotta have them!!
You're most welcome! I wanna get that done too! Just got the O3 but have yet to get them on a quad. Im using StartRC sticks, but cant seem to find them on AliEx anymore. Maybe you could get something similar.
@@TheReelRahim I made two extensions out of the 2mm posts I took out of one quad when I upgraded to the O3. First I made 9mm extensions as that would match the height of the big black DJI box I'm used to flying. But that seemed too tall, so I made some 6mm ones. Flew that for a while and switched back to the 9mm. The height is right, but the body of the DJI stick is smooth, I need something prickly. Amazon is the only place that has them - those are too long and I hate Amazon (they stole $277.20 from me, but that's another story.) I'll probably end up designing and making some. I'll let you know when I do.
Have you had any trouble with the RC2 saying sticks out of range or some such error message? I had it pop up in goggles yesterday, rebooted everything and it went away, but I've seen others say the same and it's somehow related to the adjustments we do to make the sticks as you describe in your vid.
Can you please make a video on how to adjust the controlar back to the original spring load
Sorry i missed this. Did you manage to reset it? Just loosen both the screws F1 and F2 and you will be good to go.
Great video, thanks!
dudee, love your explanation! helped me a lot
Glad it helped! No prob to have it fully screwed in for F2, but adjust F1 for your friction preference. See u in the next ep!
Awesome video bruddah. This controller adjustment is da bomb
Thanks bro! Miss flying man! Cant wait for my goggles to be back!
@@TheReelRahim totally feeling u. Wat happened to ur goggles??
I got burnt marks in the centre of the screen, possibly by sun exposure. Dont recall leaving them exposed tho. So just returned to DJI for warranty claim.
@@TheReelRahim alamak
They have called! Ill go collect it next week! Time to fly!
Thanks for the video! When I switch to Manual mode I got the error “Control Stick Error”. I have already already adjusted the throttle stick to NOT have the spring to center function. How can I fix it?
You're most welcome! So about the stick error message, sorry it does not go away on its own. On each battery, u could try to recalibrate before flight. Goes away, but I got sick of doing so and just ignore it.
Perfect. Thanks brother!
Hi I enjoy your videos. I have been trying to make the switch to manual mode. However I’m having one issue. I adjusted my sticks as you showed. But when I go to try and fly when I throttle up and bring it back down it does not throttle down immediately and it hops across the surface. Is there something that’s not set right.
Sorry I missed this and great to hear from you again. Not too sure what you mean. Whats "hops across the surface", and have you found a solution to this yet?
F1 is for how strong you need to press the joystick up
And f2 is just the spring that makes it go to the middle
I used the allen tool that it come with the controller. I did abit tight the screw and the handle is almost loose but still feel a bit springload so should I do really tight the screw with the Allen tool abit harder. I wanna the handler to be really loose.
What happen when using stabil or norrmal mode? How to hover? Keep the throttle centered or down?
Sorry I missed this. Been away for awhile. So aniways if you switch to N or S modes, all you need to do is keep the throttle around the centre of the controls. No need to look at the controls, just see in the goggles. Just adjust the stick position to whether the drone is hovering in place or moving upwards or downwards. In N or S modes, the stick will not be as sensitive to input. So that means that as long as you are generally putting the stick in the centre, then the drone will hover in place. Another good way is to observe your "H" at the bottom left of the screen. Its for Height/Altitude, and is a better gauge to whether the drone is hovering at that altitude. Hope that helps.
@@TheReelRahim Thanks... I eventually found that out myself😅
can i lose also right stick? cus i feel like spirngs blocking me a bit in movement? RC for avata 2
Great video. Thank you!!
Sorry I missed this. You're most welcome. Hope the journey has been smooth for you. Do feel free to ask any help anywhere in the comments and I'll respond in kind. Till then, enjoy the journey and I'll see you in the skies!
i was eyeing the bling lol.. thanks i was able to adjust my controls for the first time.. still scurred to switch to manual but ive had it for a while and ive been practicing on liftoff with the dji blueprint download soo here goes nothing
You're most welcome, and hope your first manual flight was a good one 🤟🏽. Glad u have been practicing on the sim, as many do not know that Manual mode is a whole different beast, and going there without prior sim practice is nuts. Stay safe in the skies friend 🤟🏽
big up best video to understand quickly
Thanks mate! Hope you find your preferred feel. Take F1 as like "friction" and so add or reduce it according to preference. See you in the skies!
Thanks for the clear explanation.
You're most welcome! Hope it helps. See u in the next one 🤟🏽
how can i do flips on the fpv drone. every time I try it just goes forward or backwards like if I were to push my view all the way forward or backwards
Hi sir, can I check with you what type of screw driver to use for screwing? Thank you
Hi friend! Im using a 1.5mm Hex Driver from RJX brand. Usually sold in a set of 4 sizes for RC hobbyist. If you dont want to spend on that, you could get the DJI FPV braces (assuming you have a DJI FPV), and that kit would come with a 2-in-1 hex driver (1.5mm and 2mm). Hope that helps.
@@TheReelRahim i don't have the Dji FPV. The controller 2 when purchase seperately doesn't come with any screw driver. But managed to do it with the 1.5 mm. Anyway thank you sir! All the best from us in Sepang Malaysia!
thank you brother do you have a video on safe landing on manual mode ?
ruclips.net/video/gtvyRKTpzUU/видео.html
Here u go. REALLY try landing on grass first, or a landing pad b4 u land on concrete. ✌🏽
Thank you! This video helped alot.
Sorry I missed this. You're most welcome! Hope the journey has been smooth for you. Do feel free to ask any help anywhere in the comments and I'll respond in kind. Till then, enjoy the journey and I'll see you in the skies!
Thanks man - helpful
You're most welcome! More episodes coming. Till then, see u in the next one 🤟🏽
Great content as usual. Is there any benefit to loosening the right to make it more nimble with less spring tension or am I looking for trouble, Rah? I got my DJI FPV quad a few weeks ago but I'm waiting until my Avata arrives to start in acro mode even though I'm sure I could fly the FPV no problem. The Avata was my answer to indoor flying this winter instead of getting a cinelog 35 and having to deal with betaflight and all the things that don't involve actually being in the air.
We all love that we can fine-tune our drone to perfection. And that was what the DIY drones could give. But here is the thing, i have a Cinelog25 myself and i realised that when i got it, i didnt give a shit anymore. lol! All i did was throw in rates that im familiar with and sent it. BOX STOCK and it has been a year and more! didnt care for filters, fine tuning etc. Just send it! and yes, im in comfort zone with the DJI FPV and Avata. Safety features present, personal rates in and just got it up in the air. Yes i got adapters and i used DIY props on my DJI FPV, but that was pretty much it. Just to have options on props. So anyways just for clarity, im a Mode 2 pilot. I only have my throttle (left stick) loosened and nothing else. No adjustment on the right stick. Someone else did so and crashed on landing as it didnt keep the drone level since the sticks were not perfectly centered. Nothing to stop you from trying, but i wouldn't recommend it. Anyways welcome to FPV and i'll see you in the skies friend!
@@TheReelRahim makes sense about not f@cling with the right spring tension. My avata came today and damn nobody warned how long those batteries take to charge compared to the original fpv lol. I got one flight in before dark so now I’m going to rip through the house :)
My biggest problem is that I wanna be able to switch to manual from normal/sport and then midlfight I can switch it back to Normal/sport
I do not want to adjust the stick every time would it be possible that I could leave it spring loaded or maybe in between so it slowly returns back to center ?
Thanks great vid
Yes u can with the original spring load, or ease it abit so its not so strong. This episode is just a guideline, and i hope u find a setting that works for u 🤙🏼
@@TheReelRahim thanks man
Thanks mate! Awesome and precise :)
You're most welcome! The friction part is up to you to find your sweet spot. I know pilots that either fly it loose or really stiff, and thats their personal setup. So give it a try and i'll see you in the skies🤟🏽
Great video! Thanks for the insights :) May I ask which flight simulator software you use? Got a quick question regarding the throttle. Was not able to really hover in the same position, after adjusting the sticks, but not too sure if its just my shaking hands, that I either give too much throttle or to way too less...
Thanks! I use Velocidrone and for easy on-the-go with my Android phone, i use this:
ruclips.net/video/9WY297mYwzs/видео.html
About the hover in place, its likely shaky hands. Im assuming you mean hover in Manual mode. Its not easy to do so in Manual mode, as throttle is on your full control. When I try to hover, im actually making micro, VERY MICRO bleeping of the throttle to keep it in place, and gets way harder to do so if its a windy day. So no fret, it takes awhile to really hover the drone in M mode.
Following you from Brazil
Greetings! Thanks and see you in the next one!
Simple and good explanation 👍🙂
Thanks! Hope to help pilots along with one of the most crucial steps to Manual Mode flying 🤟🏽
can we make the throttle back into a stock from DJI ? by loosing the 2 screws ? can u understand ? sorry for my bad eng. answer pleass thankyouu
Yes just loosen the 2 screws
Thank you my friend love your Advice it help me a lot
Glad to hear. Do spend more time in the sim. Thats going to help be more reactive in the skies. Do ask if you have any issues. ✌🏽
EXCELLENT VIDEO - THANK YOU SIR
Sorry I missed this. You're most welcome! Hope the journey has been smooth for you. Do feel free to ask any help anywhere in the comments and I'll respond in kind. Till then, enjoy the journey and I'll see you in the skies!
hey man...thanks for the tutorial videos....im trying to link or bind my tx16s rc to talk to my dji fpv drone....whats the best way to do it
Im sorry, currently it proprietary. U will only be able to link the original DJI FPV Controller to the drone. 🙏🏼
Mate. Love your videos
Tq for much love 🙏🏼. Still recovering. Gonna do some reviews, then will be back w DJI FPV content soon ✌🏽.
Thanks so much that was very helpful ❤
Glad to hear. Try it out and tune to preference. See u in the skies friend!
Thanks for the great vid
This worked great for flying the DJI Avata in manual mode. I could fly in acro just fine, do my flips, rolls etc. However, as soon as I activated manual mode in-flight the goggle show a "remote controller control stick error" error message in the lower right. Is this something I need to live with because of the Controller mod or can I make it go away somehow? Many thanks 🙂
I did firmware updates and it went away. That should help. Sorry its been awhile since I responded. Do share here if you are still experiencing it, thanks.
@@TheReelRahim Recalibrating the controller was the solution for this in my case :-)
thx, very nice wrapup
Sorry I missed this. You're most welcome! Hope the journey has been smooth for you. Do feel free to ask any help anywhere in the comments and I'll respond in kind. Till then, enjoy the journey and I'll see you in the skies!
Question. Can I undo the right stick as well (both directions) and yaw on the left as well? Now that I have some experience it feels that they are too hard so when I make transitions from left to right etc. it's hard to do it smooth hence it shows as jerky on the footage. Especially on the left stick, when I wanna turn but keep the throttle at about the same value. :) I just think the click is too hard when transitioning at middle point.
I see. Yep its that mid point transition. But there is no adjuster screws for that. So to get better control, i use longer sticks ✌🏽
Would this work with a different controller?
Its absolutely needed.. FPV since day one. No simulator..fly or die. Lol but we built our birds.. had to.. fly wreck..repair!! Lol
Fly Crash Repair Repeat. For us its a must have, but I guess its just out of comfort zone for some that have been flying drones in angle modes. I bet as they go along, they will realise that its much easier to fly acro/manual and not having to fight with the throttle stick all the time.
nice tutorial, thanks
You're most welcome. If u run into any issues, feel free to ask ✌🏽
what size and type of screwdriver did you use ???
I used a 1.5mm hex driver. Hope that helps
@@TheReelRahim thanks man
You're most welcome.
My right stick is slightly off center and naturally stops slightly to the left of center. This affects my ability to fly straight because the drone is always tilting left unless I manually adjust it... do you know how to adjust the sticks back to center from their left-right orientation?
Im sorry i missed this. Did you manage to sort it out? This shouldn't be the case with the controls. Seems like there is issue with the gimbals of the controller. There is no direct adjustment to the left and right. You would need to take apart the whole controller to rectify this. Best bet is to bring it back to DJI for repairs.
How do you switch it back so you can fly normal and sport with the controller?
I got it working again, had to recalibrate the controller for it to work again :D
Hi Rahim . I have done the back part Tightening the F1 screw and Loosening the F2 screw . My question here do i have to change any setting because the i chop the throttle the motor shuts off
If u are grounded, then the motors will cut if u chop the throttle. This is part of landing procedure. But if u do the same in air, motors will be at low spinning idle and will not cut off, unless u off motors via switch. Hope that helps.
@@TheReelRahim off Motor switch means ?
In one of the firmware updates, u can start assigning the right 3-way switch to on/off motors, but only avail in Manual Mode. Useful for me, as its common practice for DIY drone pilots to have a dedicated switch to arm/disarm motors.