I have a 2011 Armada and I definitely appreciate your videos,I love my Nissan but the dealer prices to repair/replace items are insane. Thank you for helping me and others keep their vehicles going smooth.
I'll be doing something a little different on the Titan as it pertains to plastics, hopefully you enjoy it. I also have like 5 or 6 videos recorded on the Titan that are just waiting to be edited. Tons of Titan content coming.
I'm doing this now. Driver's went back in easy and the fit is great. The only slightly tolerable gap is between the clear light and the busted ass white trim piece. I did not reinstall the spacer/washers. The other side is giving me fits on tightening up the gaps between the light housing and the body panels. The spacer washer things seem to help, but put the screw holes out of alignment. I keep cross-threading the bolts. Did you reinsert the spacers? Anyway, yours looks great and this is a very helpful video. Thanks for all the content!
Nicely done Ry! are you planning to upgrade your headlights to LED ? I know that alot of those headlights houses are not really designed for LED but still it makes a huge difference
Have a couple of questions , I'm OK doing simple stuff on my 06 xe but I don't want to go into complicated stuff either . My issue isn't the headlight it's the side bottom bumper on the passenger side , it's all loose .either the person that had the truck before me left the clips off under the headlight or they broke free as time went on , but now it's hanging loose under the headlight. I'd like to put clips on the bumper to hold it in place like it should be but I'm nervous taking the grill and headlight off and screwing something up .and I can't find a video anywhere on how to put the clips on the side bumper under the headlights .do you have a video on how to do this ? Is it something your average joe can do or will I be opening up a can of worms ? I hate to spend alot of money to get it done if I can do it myself etc.
That was a HORRIBLE display of showing those last 2 bolts by the bumper.. HORRIBLE... couldn't even see where you were.. the camera was too close to tell what the Hell you where lookin at.. im sure you can tell cause you're filming it...smh
My brother is getting me a pair of headlights for my 2010 Titan for Christmas. I can't wait!!! Love my brother.❤️❤️❤️
Sweet! 👍🏻👍🏻👍🏻
I have a 2011 Armada and I definitely appreciate your videos,I love my Nissan but the dealer prices to repair/replace items are insane. Thank you for helping me and others keep their vehicles going smooth.
Dude thank you for giving the Titans so love!! keep it up man!!!!! Don't forget the axle vent mod!
You got it! Absolutely loving my Titan. Did the vent mod for the X and will knock it out on the Titan soon.
Thanks!
No, thank YOU. I appreciate it. :D
Love the Titan....I'm looking to buy one, look forward to videos of painting your plastics like you did on the X!!
Thanks for the video Ry!
I'll be doing something a little different on the Titan as it pertains to plastics, hopefully you enjoy it. I also have like 5 or 6 videos recorded on the Titan that are just waiting to be edited. Tons of Titan content coming.
Wow… that makes the truck look almost brand new!
Right?! It's such a huge difference.
They look good 👍
Thanks!
As always...nicely done!
Thanks! 👍🏻💪🏻
I'm doing this now. Driver's went back in easy and the fit is great. The only slightly tolerable gap is between the clear light and the busted ass white trim piece. I did not reinstall the spacer/washers. The other side is giving me fits on tightening up the gaps between the light housing and the body panels. The spacer washer things seem to help, but put the screw holes out of alignment. I keep cross-threading the bolts. Did you reinsert the spacers?
Anyway, yours looks great and this is a very helpful video. Thanks for all the content!
what are those fragile white pieces called need to replace mine as well cus i broke mine too while replacing my lights
You should've had the headlights and foglights covered with PPF Film to protect them.
Probably
Any issues with the lights now that you had them installed for while? Thanks for the video.
Nope, these have been great. I will say though, they have spent most of their life so far in a garage.
Nicely done Ry! are you planning to upgrade your headlights to LED ? I know that alot of those headlights houses are not really designed for LED but still it makes a huge difference
I have a couple lighting companies that want to sponsor me so I might pick some up. Not sure.
Have a couple of questions , I'm OK doing simple stuff on my 06 xe but I don't want to go into complicated stuff either .
My issue isn't the headlight it's the side bottom bumper on the passenger side , it's all loose .either the person that had the truck before me left the clips off under the headlight or they broke free as time went on , but now it's hanging loose under the headlight. I'd like to put clips on the bumper to hold it in place like it should be but I'm nervous taking the grill and headlight off and screwing something up .and I can't find a video anywhere on how to put the clips on the side bumper under the headlights .do you have a video on how to do this ? Is it something your average joe can do or will I be opening up a can of worms ? I hate to spend alot of money to get it done if I can do it myself etc.
Mine are cloudy af. Tried a couple products to restore them but didn’t work. Think the inside is fed too
Bummer
How are they holding up till now?
They are still good! A little bit of yellowing but seals area still good.
Do you have a lift on your truck and if so how big
I did about 2.25" just in front as a sort of leveling kit. They are new springs from ADO.
Man I am looking for a video of how to adjust the headlights
I only have one for the xterra
Baby you don't have to do all that turn tires out get the side hRd cover and get bulb out. You taking front end for that sorry
You have to remove it for the headlights, just not the fog lights.
That was a HORRIBLE display of showing those last 2 bolts by the bumper.. HORRIBLE... couldn't even see where you were.. the camera was too close to tell what the Hell you where lookin at.. im sure you can tell cause you're filming it...smh
Lol sorry the free instructional content isn't up to your standards. If you don't like it go watch something else or learn for yourself.... Bye! 👋🏻 👋🏻
@@Rythecarguy SOME PPL 🤣 I thought you did an excellent presentation..KUDOs
@@kevinhowe290 thanks dude. 💪🏻
Thanks!
Wow, thank YOU!