Toyota Corolla Radio W58810 repair (intermittent no sound)

Поделиться
HTML-код
  • Опубликовано: 5 окт 2024
  • I've got this Radio from a scrapyard to repair for a customer. The Owner of the scrapyard told me, these radios always fails with ths same symptoms. I hope this video can help you to fix your radio as well.

Комментарии • 74

  • @tibitek
    @tibitek Год назад +2

    Thanks, this has worked! (I soldered all the power transistors from the top side of the PCB too.) You have saved me hours of "debugging".

  • @janipuumala9809
    @janipuumala9809 2 года назад +3

    Thank you for this video. I repaired my radio as well by soldering these power transistors. Remember to solder them from both sides, as the through holes can be damaged from vibration. My radio had almost none tin on the component side of Printed Circuit Board, so it was possible that the through holes of PCB were damaged and current couldn' flow on the other side if I soldered only the bottom side of Transistor legs. By soldering from both sides I ensured that a damaged through hole wouldn't matter as the transistor leg is taking care of moving current from side to side.

  • @givi6358
    @givi6358 Год назад +1

    a big thanks. now everything works ok. it was almost all detached!
    Gianni from Italy

  • @hectornavas34
    @hectornavas34 2 года назад +2

    You are the man!!! I suspect something similar but your troubleshooting have been amazing. I don't have some many toys to play. Much appreciated.

  • @silviadelatorreugarteflore1388
    @silviadelatorreugarteflore1388 4 года назад +2

    Thank so much for your video.
    My radio had the same issue since three month ago.
    (Corolla verso 2006- Spain ) I will weld transistor No 1 in the left, this is the faulty one and it fixed the problem.
    I think it is a defect from Toyota you showed very clear. Thank you other time.

  • @andrewbuttigieg2824
    @andrewbuttigieg2824 5 лет назад +2

    Exact same problem I have with mine. Good to know of a fix instead of 300+ euros to "repair". Thanks for this!

  • @gussed6485
    @gussed6485 5 лет назад +3

    Hi, thanks for this fix, got my corolla verso 2006 radio to work after I soldered all 4 transistors.

  • @audiovisionable
    @audiovisionable 4 года назад +2

    Thanks a lot for great help. I had the same problem, and now I have repaired the radio.
    Greetings from Norway

    • @Snurre86
      @Snurre86 2 года назад

      skrudde baklyse seg av slik som i videoen?

  • @romasiux1
    @romasiux1 3 года назад +2

    Thank You very much.
    I shall do that experience with the same prolems on Toyota radio on weekend.

    • @romasiux1
      @romasiux1 3 года назад +1

      Thank You
      Radio and CD working

  • @marekstraka285
    @marekstraka285 4 года назад +2

    Thank you a lot, you gave me the motivation to repair mine.
    Had almost same symptoms, just the display was turning off as well when failing. it was sensitive to vibrations, temperature and length of being turned on. Like a year ago I took it of and reslodered all the connectors and few holes, but it just lasted like 1 month (have not fixed anything obviously)
    Based on your video, I resoldered again, with focus on transistors, which made sense as it was sensitive in same area. However, without success again.
    But as you showed me there is service manual available and I really don't like to lose against IT or electronics problems, I spent some more time on it and traced the problem down to IC704, pin9. After resoldering resistors R797, R799 and R796 it is working like charm :)

    • @jaxxanthony5350
      @jaxxanthony5350 3 года назад

      I dont mean to be offtopic but does anybody know of a tool to get back into an instagram account??
      I was stupid lost my password. I would appreciate any help you can offer me

    • @jaxxanthony5350
      @jaxxanthony5350 3 года назад

      @Roger Paul I really appreciate your reply. I got to the site on google and I'm in the hacking process atm.
      Seems to take a while so I will get back to you later with my results.

    • @jaxxanthony5350
      @jaxxanthony5350 3 года назад

      @Roger Paul It worked and I now got access to my account again. I'm so happy:D
      Thank you so much you saved my ass :D

    • @rogerpaul2931
      @rogerpaul2931 3 года назад

      @Jaxx Anthony Happy to help =)

  • @t.w.8822
    @t.w.8822 Год назад +1

    Hi, just fixed it, great work! I am so happy, thank you!!!😄👍

    • @kostelectronics
      @kostelectronics  Год назад

      Congratulations! :) This is my goal, help others! BR from Switzerland!

  • @aleksandrbasiul9736
    @aleksandrbasiul9736 5 лет назад +2

    Thanks for this video. I didnt hase music in my car long time, about 1 year and now i have! Thank you very much.

  • @marzenajonsson6555
    @marzenajonsson6555 5 лет назад +6

    Thanx so much for helpful video.
    My radio had the same issue.
    (Corolla verso 2006- Sweden ) I resolderd
    all 4 transistors just to be sure and it fixed the problem. Transistor No 1 to the left was the faulty one but the other 3 were bad as well. Greetings from Sweden.

  • @t.w.8822
    @t.w.8822 Год назад

    Thank you, top and great analyisis! I will open my radio a third time now and try to fix it.

  • @ennecarsmeccatronica2273
    @ennecarsmeccatronica2273 4 года назад +1

    Excellent repair but above all excellent CD!

  • @saarike
    @saarike 5 лет назад +2

    Now that was interesting radio to fix. Thanks for vid!

  • @seanmc6957
    @seanmc6957 2 года назад +1

    Thank you for showing me how to fix my girlfriend toyota corolla radio it would not turn on 😊

  • @IsikUgurlu
    @IsikUgurlu 4 года назад +1

    Mine is Corolla 2002, NOT Verso, but the problem is exactly the same. Audio system model number is W58802. Unfortunately those four transistors connected to a heat sink do not exist on this model. I could barely detected 3 transistors located here and there. Applying some pressure on them had no effect. So it is a dead end for me! Thanks for the video anyway.

  • @borisrud1286
    @borisrud1286 5 лет назад +1

    Nice work, have the same problem. Tank You!

  • @Mojo-cg3xo
    @Mojo-cg3xo 4 года назад +2

    Hi, get step by step instructions, I managed to fix my 2006 Corolla radio.
    I have a 2014 Corolla touchscreen radio with Bluetooth and it’s constantly rebooting even after resetting the radio it’s stuck in an endless reboot. Any suggestions on how to fix this??

  • @salvadorparra8098
    @salvadorparra8098 4 месяца назад

    Thank you very much for your video, it was very helpful!!!

  • @amarghani
    @amarghani 5 лет назад +2

    much appreciated, thank you for sharing.

    • @kostelectronics
      @kostelectronics  5 лет назад

      Thank you for watching my Videos! BR Matthias from Switzerland :)

    • @inkognto1557
      @inkognto1557 3 года назад +1

      @@kostelectronics I also have no sound,did you replace the elements? or soldered?

  • @gaborbak9278
    @gaborbak9278 4 года назад +1

    Great video, thank you very much. It seems, you are an expert. Unfortunately this solution didn't work on my radio. The sympthom occurred again after the resolding all of the transistor legs. Have you got any tips, what could be wrong with it? Which direction should I go?

  • @skirmantas5605
    @skirmantas5605 5 лет назад +1

    same problem ,thank you !

  • @3dprinting370
    @3dprinting370 Год назад +1

    Merci, Cela a fonctionné nickel pour moi.

  • @Snurre86
    @Snurre86 2 года назад +1

    I have the 2003/2004 model car. Not completely the same radio, the back light does not flicker but the sound was intermittent for a while then completely left. The volume does not display when i adjust it, but I don't know if that is normal.
    I opened and solder heated the 707 contact points just to get the solder re-seated but no sound still.

  • @womenssoccerunited
    @womenssoccerunited 5 лет назад +1

    Very good information Video, Thank you

  • @oubanajimohamed772
    @oubanajimohamed772 3 месяца назад

    thank you very much for sharing broo

  • @darkslidesk8t3r
    @darkslidesk8t3r 4 года назад +3

    Where did you find The schematics?

  • @josemanuelaguilarfernandez5035
    @josemanuelaguilarfernandez5035 4 года назад +1

    Me a sido de mucha ayuda. Muchísimas gracias

  • @sarahwilliams170
    @sarahwilliams170 Год назад +1

    Hi was going to take a look at my car radio cd player, it won't turn on, 12v to the back of the unit, ground good and ignition good. What do I need to watch out for as for as this warning is concerned "Hazardous electromagnetic radiation when interlock defeated"? when I open the unit. Also any ideas on the likely faulty part. Thanks in advance.

  • @sinusvag
    @sinusvag 2 года назад +1

    Nice tutorial! Since you have the schematic, would you be able to give a hint on if there is a stereo path on the pcb to the amplifier section? I am planning to "enter" that path, cutting it, and installing a bluetooth module which passes through audio when not connected. Or if you know where the schematic can be found? Many thanks from Sweden

    • @sinusvag
      @sinusvag 2 года назад

      Oh, and as I as asked, I found it! elektrotanya.com/panasonic_matsushita_cq-ts7421k_toyota.pdf/download.html#dl

  • @AndrzejLaurynenka
    @AndrzejLaurynenka 5 лет назад +3

    Thank so much man! Заебись помогло стандартная проблема.

    • @LeKing27
      @LeKing27 5 лет назад

      Thanks very much for explaination, I do have same problem with mine, the power is on but no sound.

    • @ВячеславЦыганов-ф1я
      @ВячеславЦыганов-ф1я 4 года назад

      Нихера она тут не стандартная, там беда с нулевыми резисторами в цепях этих транзисторов стабилизатора, такое чувство, что их туда поставили спецом, для бужущих проблем. Одно не понятно зачем такая лаборатория, что бы решить эту детскую болезнь.

  • @hichamth
    @hichamth 5 лет назад +1

    Very good

  • @t.w.8822
    @t.w.8822 Год назад

    Dear, I guess I was cheering too loud. The failure came back. This radio is really annoying :-) Maybe also the wire in the board is broke. Don't now you if I want to open it again :-)

    • @t.w.8822
      @t.w.8822 11 месяцев назад

      Hi, I re-opend afsin and soldeted it better, aprox 1 week aftwr this post. I slso soldeted one of the tiny sms resistors directly in ftont of it. Si ce then it eorks perfectly. Best regards to Switzerland

  • @bildillamagasin
    @bildillamagasin 5 лет назад +1

    Very good video!!! :)

  • @sampelt
    @sampelt 2 года назад +1

    Exact same problem I have with mine.

  • @sariii6887
    @sariii6887 2 года назад +1

    Wo könnte ich den Schaltplan runterladen für meinen Radio?
    Lg aus Wien

  • @yazanalmograbe7171
    @yazanalmograbe7171 4 года назад +1

    How do you get these detailed maps? I work just like you, but I can't find such maps🤔🤔🤔☕

    • @justaspapucka4931
      @justaspapucka4931 3 года назад

      www.manualslib.com/download/1850086/Toyota-Cq-Ts7421k.html

  • @mustafaaldulemi4141
    @mustafaaldulemi4141 Год назад

    Ich habe auch das gleiche Problem im Radio, was soll ich bitte tun?

  • @Anashassan1981
    @Anashassan1981 3 года назад +1

    Hallo, wie kann ich Sie kontaktieren? Ich habe ein Problem mit der Kamera

  • @belmanrecinos4773
    @belmanrecinos4773 4 года назад +1

    Hi can you help me to repair my radio Corolla 2014 where are you located?

    • @Snurre86
      @Snurre86 2 года назад

      he is in finland

  • @ВячеславЦыганов-ф1я
    @ВячеславЦыганов-ф1я 4 года назад +1

    There is another problem with this radio model. Need to replace R717, R716, R705, R704

  • @nothing15382
    @nothing15382 Год назад

    Tam na sxemi Q731 cto za tranzistor ?

  • @zezitolx
    @zezitolx 4 года назад +1

    hello my auto radio wont turn on , i check the transistors and seem ok , any sugestion?

    • @kostelectronics
      @kostelectronics  4 года назад

      You can not see the problem. You have to resolder it. If the problem still there, i can give you the service-manual

    • @DPProduction
      @DPProduction 4 года назад

      @@kostelectronics Hello, greetings from Slovakia. It is possible to send me W58810 service-manual? I checked and resoldered all 4 transistors and also chcecked R717, R716, R705, R704 resistors, and the problem remains the same. Many thanx!

    • @kostelectronics
      @kostelectronics  4 года назад

      @@DPProduction Check your e-mail. Maybe you have a bad IC701, check for the +5V output there and other voltages. Good luck!

  • @romdhanerafik4842
    @romdhanerafik4842 2 года назад +1

    Hi....Boss Please i need schematics and 1000 Thanks

  • @Fechi91
    @Fechi91 5 лет назад +1

    Ich habe das selbe Problem. Was genau wurde jetzt gemacht. Einfach einen Lötpunkt drauf oder abgemacht und neu draufgelötet?

    • @kostelectronics
      @kostelectronics  5 лет назад

      Von beiden Seiten her gelötet. Das Problem war ja das gebrochene VIA

    • @Fechi91
      @Fechi91 5 лет назад

      @@kostelectronics Ich bin gerade dabei. Mal sehen ob ich das hinbekomme beim 1. Mal Löten. 😂

    • @kostelectronics
      @kostelectronics  5 лет назад

      @@Fechi91 Von wo bist Du? sonst kann ich Dir gerne helfen

    • @Fechi91
      @Fechi91 5 лет назад

      @@kostelectronics Aus Berlin. Ok hat nicht geklappt, beim anschließen hats geknallt. Mist...

    • @Fechi91
      @Fechi91 5 лет назад

      @@kostelectronics Schreib mir doch mal gerne bei Facebook. Da heiße ich wie hier.

  • @gumiarek
    @gumiarek 3 года назад +1

    R716 and R717