Many videos on RUclips just for manipulating things but following this video it helps me to fix my tv, now it is working fine my LG tv webos model number is different than yours but It looks like display paths are similar in all models thanks sir 🤠🤠🤠
Great job man. My 49UH770 started behaving same way. Your solution worked. It was second one ribbon and taped out aprox. 10 pins from the centre leaving first three pins uncovered.🥰🥰🥰🥰
I think you can use regular duct tape. It's only there to disrupt connection with the deffective parts or something like that. It's not as good as a new TV but it's pretty close and cheap to fix.
Many videos on RUclips just for manipulating things but following this video it helps me to fix my tv, now it is working fine my LG tv webos model number is different than yours but It looks like display paths are similar in all models thanks sir 🤠🤠🤠
2024 and you still the MF GOAT !!!!!! Made a 40 dollar tv into a 350 dollar one
Great, this worked for me to! Had to search which pins but eventually found them
You brilliant man, just fixed mine with a piece of sellotape!! 😊
My Thomson TV as same problem I tried this trick it's working thank you
Supar information sir
Sanyo 49
Thank you, this video was the fix for mine LG 49UB830V flickering 🙂
I fixed it using this method a few months ago and started again. I don't know if the problem is the board or something else. Could you please help me?
i just could not get it to work so as a last attempt i swapped the cables around and it seems to be working fine might be worth a try
Great job man. My 49UH770 started behaving same way. Your solution worked. It was second one ribbon and taped out aprox. 10 pins from the centre leaving first three pins uncovered.🥰🥰🥰🥰
What tape did you use?
@@crystalfagan2216 ordinary scotch tape. Just doubled it for good measure.
How did u count such small lines, what size should be the tape?
@@3rdgeneration536 good macro lense and luck. Nothing else.
So therefore the cable is the problem?
Bro just save my 128 cm tv THANK YOU !!!!!!!!!❤
What are you using to put on as a signal blocker it's yello
Дякую тобі друже. Зберіг мені купу грошей. Все спрацювало
Worked on my 55 lg - 55uh617y
Thank you very very much
Hi i have same problem on same tv what did u do n the tape?
Thanks you! Worked just fine.
Fixing that, can the problem appear again??? If yes, have to follow the same steps???
What tape did you use? Great video thank you
Writable Invisible tape with dispenser is what I used . I just have to keep putting it in different stops until you find what works
Wouldn't putting tape on the the ribbon cause it not to make a good connection and not work?
The tape is insulating so there is no connection at all. Not sure why that would work but it did work on mine.
It actually worked! Thanks!
Good job thanks
Thank you, in my case it was the other flat
What is the name of the tape you used to stick those cables?
I also would like to know....
What was the tape called please
@@aaronbooth6008 it's kapton tape
I think you can use regular duct tape. It's only there to disrupt connection with the deffective parts or something like that. It's not as good as a new TV but it's pretty close and cheap to fix.
Thanks
Hello, i have on both Lines. Is it posible to send you pictures? Thanks greedings
lg 49uh650v panel repair?
Same problem in my TV 43UK.. can you please help me
Is the problem the tcon card?
No audible his voice. Pl.reload with audible sound and reason to tape, on which part and why? Hope you don't mind! Regards.
is possible to play h265 direct from a usb stick on this? a codec dowload into the memory of the tv ?
i have a 42la6200
If it is installed you can play but also need a different player, not in the in-built player it is old
@@rtc.pconsol2350 ich wzeis. Lund X
ça à fonctionné sur ma 55UH950V
Is it the board or ribbon is the problem?
What is the permannt solution for this problem? As i did this method but colors are not so good. Pls reply me permanant solution. Thanks
Most casess working 100%, but sometimes just can't fix 100%, nothing you can do,
Is tape causing this issue or board? Don’t say nothing you can do cos it doesn’t make sense
@@gregfromthevaley taping 10 pins haven’t fixed it. But taping 15pins fixed the tv 100% in my case.
OK what is the permanent solution,which board is the problem or ribbon?
For me didnt work maybe problem is in motherboard
Mozna wiedziec po co te piny są zaklejone?
W skrucie: eliminujesz uszkodzony driver
Dzięki.
What tape u use
kapton tape
Hey mines is still jumping but not a big amount only up to the top of the Tv
Do you really need to use a certain tape?
It work buh the screen quality is not showing
It didn't work for me😪
Mine lasted for 3 months...
how is this f*****g possible?? 😅😅 I try it once and it works, but after a couple of months is started again flickering. second solution??