Can this jel product be used to glue 1/2 plywood to a 2×4 frame without having to put screws through the face of the plywood ? Trying to keep the face of a Cornhole board free of screws
@@hammerandhome thank you, i normally pocket screw them through the tops and the paint or wraps cover them. i have a order for a plain wood set of boards and afraid to use the pocket hole screws for fear the screws will come through the tops
I'd like to point out that these are not actually unique products. The adhesive is just Cyanoacrylate, CA Glue, or as it's most commonly sold as, Super Glue. And the activator is CA accelerator, sometimes called Zip Kicker which is one of the oldest and most well known brands of accelerator. I'm sure 2p10 has there own slightly different formulation like all brand do but I find it a bit misleading that these are being advertised as if they were some kind of unique two part adhesive where both parts need to be used together. The glue will set by itself given time just like any super glue and the activator will work just as well on any other brand of super glue such as Locktite or Gorilla.
For M DF You have to use super glue on both sides then Combined then Accelerator And don't forget Don't put it on your skin then Use accelerator it will burn your skin 😆🍻🍺😊
You’d have to spread it evenly over the entire joined surface and wait for half an hour or ao. It’s meant to be used alongside wood glue to basically act as a liquid clamp.
This was a super helpful video thank you!!
I use it at least on a weekly basis and love it.
once you start using it you never go back, thanks for watching
Holy Dewalt!!! I love it.. Dewalt is my favorite
Thanks for watching, yeah I have a few dewalt tools😂
I have not used this product, although I just purchased some and thank you for your example video.
Kind regards.
Now I've used a lot💥,
and I'm in love with it💚.
👍
Will this work to repair partial board before using wood putty?
I think your asking about particle board? It’s ok on particle board. But that being said, particle board is hard to fix because it’s just wood chips.
Can this jel product be used to glue 1/2 plywood to a 2×4 frame without having to put screws through the face of the plywood ? Trying to keep the face of a Cornhole board free of screws
Yeah definitely, you could use it in conjunction with regular wood glue. That way you don’t have to use so much 2p10
@@hammerandhome thank you, i normally pocket screw them through the tops and the paint or wraps cover them. i have a order for a plain wood set of boards and afraid to use the pocket hole screws for fear the screws will come through the tops
Good demo
Appreciate your video, thank you
Thanks!
Thanks
I'd like to point out that these are not actually unique products. The adhesive is just Cyanoacrylate, CA Glue, or as it's most commonly sold as, Super Glue. And the activator is CA accelerator, sometimes called Zip Kicker which is one of the oldest and most well known brands of accelerator.
I'm sure 2p10 has there own slightly different formulation like all brand do but I find it a bit misleading that these are being advertised as if they were some kind of unique two part adhesive where both parts need to be used together. The glue will set by itself given time just like any super glue and the activator will work just as well on any other brand of super glue such as Locktite or Gorilla.
I'll let you decide to go back into the video to find out where exactly you messed up 🙂
For M DF You have to use super glue on both sides then Combined then Accelerator And don't forget Don't put it on your skin then Use accelerator it will burn your skin
😆🍻🍺😊
good tip, Thanks
Your demo shows the 2 parts are easily separated after you glued them. Poor demo or poor quality glue?
You’d have to spread it evenly over the entire joined surface and wait for half an hour or ao. It’s meant to be used alongside wood glue to basically act as a liquid clamp.
They came apart a little too easy. Didn't stick well.
Maybe more glue needed
@@jayreed3954 definitely