Why is that controller so dang expensive? 200amp is common. There are dual motor vesc's that can take 84v 350amps for $350. what does this have to be $1000 more?
at 05:50, that plate your're holding in your right hand, i think the bearing in the center on mine is trashed... it has a small wobble in it, enough to make the disc move 1mm. Is it possible to fix it you think?
Great video! Greeting from Poland :) I'm thinking of getting Inokim Ox for myself. I'm watching different videos for what should new owner think of. This 10 month review gives a lot of overview :) thanks, keep on going :)
i have to be honest, after few calculations, the optimal solution for long lifespan of the scooter, i've decided to go with 2 bacs800 and 2 motors. it is still going to be a hell of a scooter,definitely going up to 100 kmh.
@@NikoxD93 and 10 months after, i am AGAIN, on a path going with a fat single controller (200a) and only rear drive. Only now i am rebuilding the motor, and adding some juice in it, to withstand the load. Did a short intro video on that, part 2 soon, with actual tests.
How are you managing heat in yours, I seem to get heat soak after about 20 mins of riding, the scooter will slow down by about 20-30%. The motor is not too hot but I think the asi is getting too hot 😅
How is that compared with either ninebot maxG30 or zero 10x, the most important thing for me is suspension, sense I'm suffering from back pain due to herniated discs. Thanks for your review!
all different. G30 is a beginners league, nothing to do but buy and ride. 10x and ox are awesome bases for any upgrades you want. your back has not much to do with the suspension, riding any scooter should involve bent knees, same as snowboard or skate.
@@SUB13333 My knees are bent, I used to be a skater and used rollerblades too many years ago, I know how it works. I have two herniated discs in my spine, so every small shock due to some dent on the road or small stone goes a long way on my back.
@@SUB13333 hey there, just an update. I finally received my Zero 10x and I love it! Thanks for your support, I'm so happy. Suspension is great, and also it's such a powerful beast, with dual motor mode I can drive uphill with ease. I only need to attend some squeaky brakes on my new Hydraulic brakes that needs some adjustments I guess. (By the way, do you have any video on doing that?) Cheers!
Hey man thanks for the video very helpfull ... i have a question my friend fall and ripped de wired that goes to the motor do you know if he can repair that ? Let me know thanks .
How easy it is to replace the tube out on the road? How about the rear wheel? What's the best way to raise the scooter for tube change with no jack and without breaking my back?
easiest of them all.. i mean it only has a single arm, duhh :D i dont raise it anywhere. just put it on its side, and make sure the motor cable isnt pitched.
@@SUB13333 Happy to hear that. Couldn't find any video on this specific model, would be nice to find one as I never tried to do something like that before. Cheers.
I'm considering either buying this brand (Inokim OX) or zero 10x, but mostly now thinking of what happens after warranty, and how expensive it is to fix either one later on... Any idea there?
@@rbmanb warranty is only good for major issues - dead battery, controller, motor, or frame How frequent it is ? not much, not much at all. So the warranty is basically a commercial tool. i dont know what you consider expensive, so it isnt easy to get a clear answer on that.
Hi , when you pulled motor apart did you measure magnet size or stator size should be 50 im guessing or 60mm would be awesome.....as im getting an oxo soon .
i'd say 60, but only by visual approximation. i assure you this motor is made for hardcore usage. i've reached temps i am not proud of, and it still goes.
@@SUB13333 I was hoping 60 lol.. please measure when you next strip it... do you know on a standard oxo if you can disable the need to kickstart to get going...ie so you can just use throttle from a standstill to start..thanks for these tech videos dude..
@@SUB13333 Bugger, there must be a hack ..i bet alot of inokim owners would like the ability to disable the kick start, [myself i have to get it up some steep stairs /ramp ]..be cool if they released it or let agents have the ability to do it for you. thanks for info
@@johnsmith-sf8su nobody will invest their time to find a walk-around for a shitty controller such as their stock. Replace the damn thing and upgrade your riding instantly.
you probably dont care at all but does anybody know of a trick to log back into an Instagram account..? I stupidly lost my login password. I would love any tips you can give me!
@Tony Evan thanks for your reply. I found the site through google and I'm in the hacking process atm. Takes quite some time so I will get back to you later when my account password hopefully is recovered.
never thought about it actually, lets do the math: 26 days a month X 10 = 260 days 260 days X 28km = 7280km :) stock battery REEEEAAALLY surprised me. and it's still going. my daily usage would be using it one way to work for 12-14km->charge->12-14km back home, sometimes some slight detours.
Cool. Looking forward what asi bac2000 will do. Do you have any idea how much amps the original controller can handle with 60v battery? Keep up the good work with the videos all of us inokim ox owners are thankful for you mate!!
Hello, I have the same scooter and I wanted to know...what is the size of the place where the battery is...I want to make a custom battery and I want to use every inch that is there...can you please tell me what's the size of it
Why is that controller so dang expensive? 200amp is common. There are dual motor vesc's that can take 84v 350amps for $350. what does this have to be $1000 more?
at 05:50, that plate your're holding in your right hand, i think the bearing in the center on mine is trashed... it has a small wobble in it, enough to make the disc move 1mm. Is it possible to fix it you think?
Great video! Greeting from Poland :) I'm thinking of getting Inokim Ox for myself. I'm watching different videos for what should new owner think of. This 10 month review gives a lot of overview :) thanks, keep on going :)
I'm glad I could help
Lol! I had to subscribe when you announced the next controller update! Insane!
i have to be honest, after few calculations, the optimal solution for long lifespan of the scooter, i've decided to go with 2 bacs800 and 2 motors. it is still going to be a hell of a scooter,definitely going up to 100 kmh.
@@SUB13333 That seems like a nice solution, still a crazy amount of power, I guess the small wheels must have good efficiency and heat dissipation
@@NikoxD93 and 10 months after, i am AGAIN, on a path going with a fat single controller (200a) and only rear drive. Only now i am rebuilding the motor, and adding some juice in it, to withstand the load. Did a short intro video on that, part 2 soon, with actual tests.
@@SUB13333 Cool man ! I'll check it out
what is the motor for this scooter? trying to see if it can be sourced from somewhere other than inokim directly
More vids on your ox conversion as I'm looking at doing it with mine
Сколько вольт имеет твой иноким ОХ? Ты поставил bac800 на оиигинальную батарею? Пойдет ли такой кон роллер на 48в будет ли от него польза на 48в?
Keep 'em coming lev!
2 motors and 2 asis coming up next :) hopefully this month.
i heard that some people said the motor has top speed limiter even when the amp is raise up.. can we gain more top speed with this controller upgrade?
yes,with field weakening option.
what is the maximum speed?
I can hit 80kmh
How are you managing heat in yours, I seem to get heat soak after about 20 mins of riding, the scooter will slow down by about 20-30%. The motor is not too hot but I think the asi is getting too hot 😅
Asi is getting hot. Bolt it into the frame with thermal paste in-between.
WD-40 spray could be used to remove the rust without any moisture.
Hey where did you get the tires for this build?
they're like the most popular in the world lol. tuvot 10 inch tire
What size of tires you fitted? Maybe link?
www.aliexpress.com/item/33060515112.html?spm=a2g0s.9042311.0.0.27424c4dfFxVPE
How is that compared with either ninebot maxG30 or zero 10x, the most important thing for me is suspension, sense I'm suffering from back pain due to herniated discs. Thanks for your review!
all different. G30 is a beginners league, nothing to do but buy and ride.
10x and ox are awesome bases for any upgrades you want. your back has not much to do with the suspension, riding any scooter should involve bent knees, same as snowboard or skate.
@@SUB13333 My knees are bent, I used to be a skater and used rollerblades too many years ago, I know how it works.
I have two herniated discs in my spine, so every small shock due to some dent on the road or small stone goes a long way on my back.
@@rbmanb in that case zero10x will be the best.
@@SUB13333 hey there, just an update. I finally received my Zero 10x and I love it! Thanks for your support, I'm so happy. Suspension is great, and also it's such a powerful beast, with dual motor mode I can drive uphill with ease.
I only need to attend some squeaky brakes on my new Hydraulic brakes that needs some adjustments I guess. (By the way, do you have any video on doing that?) Cheers!
@@rbmanb awesome , enjoy it! dont mind the squeeking brakes. As long as it is not tearing up your eardrums, i wouldnt mind.
Hey man thanks for the video very helpfull ... i have a question my friend fall and ripped de wired that goes to the motor do you know if he can repair that ? Let me know thanks .
yep. pretty easy actually
Fluidfreeride send him a new motor thanks
Where can i buy this ASI BAC 800?
How easy it is to replace the tube out on the road? How about the rear wheel? What's the best way to raise the scooter for tube change with no jack and without breaking my back?
easiest of them all.. i mean it only has a single arm, duhh :D i dont raise it anywhere. just put it on its side, and make sure the motor cable isnt pitched.
@@SUB13333 Happy to hear that. Couldn't find any video on this specific model, would be nice to find one as I never tried to do something like that before. Cheers.
I'm considering either buying this brand (Inokim OX) or zero 10x, but mostly now thinking of what happens after warranty, and how expensive it is to fix either one later on... Any idea there?
@@rbmanb warranty is only good for major issues - dead battery, controller, motor, or frame
How frequent it is ? not much, not much at all. So the warranty is basically a commercial tool.
i dont know what you consider expensive, so it isnt easy to get a clear answer on that.
@@rbmanb Coudln't find a video about what specific model? O_O
Where did you source the heatsink for the motor on the rear wheel please? This will no doubt help with the engine life.
i have made it by myself. i can send you the 3d file for cnc cut.
@@SUB13333 Thank you, you are very kind. But I don´t have the eqiupment.
@@TravelingTuna you dont need equipment. go to your local cnc machinist and ask to make the part :)
מדהים, גם אני מחכה לסרטון הבא
Hi , when you pulled motor apart did you measure magnet size or stator size should be 50 im guessing or 60mm would be awesome.....as im getting an oxo soon .
i'd say 60, but only by visual approximation. i assure you this motor is made for hardcore usage. i've reached temps i am not proud of, and it still goes.
@@SUB13333 I was hoping 60 lol.. please measure when you next strip it... do you know on a standard oxo if you can disable the need to kickstart to get going...ie so you can just use throttle from a standstill to start..thanks for these tech videos dude..
@@johnsmith-sf8su trying my best :). And no, you cannot disable push start without inokim app, which only they have.
@@SUB13333 Bugger, there must be a hack ..i bet alot of inokim owners would like the ability to disable the kick start, [myself i have to get it up some steep stairs /ramp ]..be cool if they released it or let agents have the ability to do it for you. thanks for info
@@johnsmith-sf8su nobody will invest their time to find a walk-around for a shitty controller such as their stock. Replace the damn thing and upgrade your riding instantly.
Hey, can you send the link for the new battery? Thanks great video btw.
the battery is local made in israel, if that is something that you might be interested in.
Do the newer versions use the same motor?
Yes
@SUB13333 lots of rumors saying they are rated at 500w. Good to know
ותעדכן מתי אפשר להביא לך כלים
Shud upload a few videos of the asi programming and wiring linking them together on the next build mate 👍
i am ditching asi for good after 2 years. too sensitive of a controller. i found nucular controllers now, and i cannot believe i started with asi.
Great video! What throttle and display are you using?
the most basic one. throttle + volt meter. nothing more is needed.
What was this internal engine fluid again please?
google: hubmotor ferrofluid
Love the videos 👍🏼
What esc setup would u recommend for an oxo not to crazy but need that acceleration to keep up with zero's
Please help
use dualtron3 controller, and you should be fine.
you probably dont care at all but does anybody know of a trick to log back into an Instagram account..?
I stupidly lost my login password. I would love any tips you can give me!
@Nash Elian instablaster =)
@Tony Evan thanks for your reply. I found the site through google and I'm in the hacking process atm.
Takes quite some time so I will get back to you later when my account password hopefully is recovered.
@Tony Evan it worked and I now got access to my account again. I'm so happy:D
Thank you so much, you really help me out!
GREAT & usefull video.
See you again soon.
Thank you.
Good day sir! May i ask where did you purchase your battery? Can you send me a link? Thank you and more power to your channel!
bought locally from the best builder in israel
Cool video dude, keep them coming. How many km's has your OX done now?
never thought about it
actually, lets do the math:
26 days a month X 10 = 260 days
260 days X 28km = 7280km :)
stock battery REEEEAAALLY surprised me. and it's still going.
my daily usage would be using it one way to work for 12-14km->charge->12-14km back home, sometimes some slight detours.
Cool. Looking forward what asi bac2000 will do.
Do you have any idea how much amps the original controller can handle with 60v battery?
Keep up the good work with the videos all of us inokim ox owners are thankful for you mate!!
thanks bro, really appreciate the feedback :) . original controller is rated for 40A.
Hello, I have the same scooter and I wanted to know...what is the size of the place where the battery is...I want to make a custom battery and I want to use every inch that is there...can you please tell me what's the size of it
What does this improve? Speed and acceleration?
yep! + better millage and control.
@@SUB13333 by the way fron where did you purchase the controller?
יש לך חנות ? אתה מתקין בקרים ?
כן. רוטשילד 119 ת''א
@@SUB13333יש מספר טלפון לייעוץ ?
@@AmitCohen299 0502908600