He plugs it in wrong in the video. The two ends with grey connect to the left side with the R+ and R-. The wire with the black line on it is the negative wire which connect to the R-. The same goes for the right ride with the blue. Bottom is negative with the black line and the top is positive with no black line. Hope this is easier to understand.
One question, I have an LG-SN4R 4.1 (wireless rear spakers) connected to an LG UK7550PLA TV connected via bluetooth. Both the TV and the soundbar have DTS virtual X as a surround standard. However, the standard for Netflix and Amazon Prime is Dolby. So, in this situation, how do I configure my sound bar to make the most of the 5.1 sound from streaming services? Thanks.
You need a 5.1 channel soundbar with Dolby, the soundbar you got is 4.1 channel with Dolby Digital, 4.1 has 4 channel output and one subwoofer while 5.1 has 5 channels and 1 subwoofer unless you add 1 more speaker to it you still need a system with Dolby atmos if it what you need.
Lots of time moving the speakers, then moving the control box, then moving the speakers again. Video could have been much shorter without all the rearranging. 😂
It is not connected properly, If you link everything together it would be a steady green light Reset the soundbar to factory settings by Pressing the [-] button on the sound bar and the [0] button on the remote control at the same time for more than 5 seconds You can also rest the subwoofer by pressing the button at the back for 5 seconds, press the power button on the soundbar to turn it on. When connection is established the LED light in the back of the soundbar would light up in green Try to redo the connection again
My receiver box which used to work fine isn’t giving the power light now. Any suggestions on it?
Can the mini speakers be wall mounted? Haven’t brought it but doing research into this device. Good videos….
yeah they can i mounted mine
Good job. Thank you
Welcome!
I am confused while connecting speakers as wire is not having color with grey and blue
Check properly it can be confusing indeed this video should help you
If you can explain with plus and minus terminal that would be help. For example which wire will go in plus side and which one is minus like this.
@@amitverma3211having the same problem? Did you get yours fixed
He plugs it in wrong in the video. The two ends with grey connect to the left side with the R+ and R-. The wire with the black line on it is the negative wire which connect to the R-. The same goes for the right ride with the blue. Bottom is negative with the black line and the top is positive with no black line. Hope this is easier to understand.
@@KorbynSquires Nevertheless, unfortunately does not work😢
One question, I have an LG-SN4R 4.1 (wireless rear spakers) connected to an LG UK7550PLA TV connected via bluetooth. Both the TV and the soundbar have DTS virtual X as a surround standard. However, the standard for Netflix and Amazon Prime is Dolby. So, in this situation, how do I configure my sound bar to make the most of the 5.1 sound from streaming services? Thanks.
You need a 5.1 channel soundbar with Dolby, the soundbar you got is 4.1 channel with Dolby Digital, 4.1 has 4 channel output and one subwoofer while 5.1 has 5 channels and 1 subwoofer unless you add 1 more speaker to it you still need a system with Dolby atmos if it what you need.
Is compatibile with dolby Atmos?
Can you control It with lg remote control tv
Dolby Digital LG Soundbar comes with a remote but you can choose to use your own. *TV remote as well.
But can Bluetooth to RUclips on your smart phone too?
Yes
Hi I can not get the new soundbar connected
What is the issue you are experiencing?
Thank you
You're welcome
There is no sound coming from my small speakers, you can barely hear sound coming from them. Any thoughts??
Press the Bass button up to hear the sound if you set everything properly
Did you figure this out by chance? I can’t get the sound out of them either
Me too I don’t know why there’s no sound
I had this issue when the cords weren't in the right spot, look at picture on instructions for reference and also need bass boost on
So they call it "wireless" but its clearly not.
Lots of time moving the speakers, then moving the control box, then moving the speakers again. Video could have been much shorter without all the rearranging. 😂
Hi I’ve switched the soundbar on but everything is still flashing green and doesn’t seem to be syncing together 😔
It is not connected properly, If you link everything together it would be a steady green light
Reset the soundbar to factory settings by Pressing the [-] button on the sound bar and the [0] button on the remote control at the same time for more than 5 seconds
You can also rest the subwoofer by pressing the button at the back for 5 seconds, press the power button on the soundbar to turn it on. When connection is established the LED light in the back of the soundbar would light up in green
Try to redo the connection again
Lots of time listening to music. How about my tv syncing?
ruclips.net/video/j2iA_bGPGl0/видео.html, ruclips.net/video/b2dFVTpEJpE/видео.html
The bass is awful on this. Returned it !
is powerfull the bass? because most of them is a sh.. is better a hi fi system