Has anyone been able to run with NVidia surround? I can't seem to enable both of them while using nvidia surround. It's either the resolution isn't available or windows reverts back to the game driver where the DSR setting isn't available. If I reinstall the studio driver and enable DSR then the resolution isn't available, it's either a lower resolution or the in game resolution is set to OPT .
I did this like a year ago. Its really helpful for ppl whos monitor is 1080p that the game runs with high fps than Hz you will get high quality on 1080p with some fps losing or gaining some
DLSS quality at 1080p is the same thing as DLSS performance at 1440 as both targets 1280x720 resolution rendering. you will just get a much clear image with a minor hit to performance upgrading DLSS at 1440 from DLSS at 1080 using the performance preset. and even doing this will get you a better image than native with a performance boost so that's a Win!
@@hotrod123231Who games in 4k lmao (I'm just trolling). I play call of duty at 1440p at 165fps because it's a good balance of graphics and performance.
@@pc_blend💥 Sharpness and definition are really bad in NVIDIA, serrated? I have an notebook Lenovo Legion 5i i7 12700h RTX 3060 and the image IN THAT THINGS are worst than in my Acer Aspire 5 Ryzen 7 5700u Integrated Graphics in the same conditions! NVIDIA ugly, AMD beautiful! And the filters of Experience increaaes the sharpness, but don't turn to beautiful, like AMD!
But it doesn't work in the same way. DLSS and DSR are AI implemented system far superior. DLDSR (DLSS+DSR) is the most amazing IQ in the game history. it's sad that AMD isn't capable to create something similar.
@@rodrigomendes3327 Not really. DLSS and FSR have virtually the same performance cost and generally the visual quality of DLSS is slightly better but in MW2 specifically, DLSS looks quite a bit worse than even Nvidia Image Scaling. FSR 2.0/2.1 is fairly comparable to DLSS, I would not say DLSS is 'far superior'.
@@3boodAl7asan DLSS at 1080p is effective but shines at 1440p and 4K where the image is already super sharp and the loss is damn near impossible to spot naturally, i had to watch a video on what to look for to identify upscaling.
💥 Sharpness and definition are really bad in NVIDIA, serrated? I have an notebook Lenovo Legion 5i i7 12700h RTX 3060 and the image IN THAT THINGS are worst than in my Acer Aspire 5 Ryzen 7 5700u Integrated Graphics in the same conditions! NVIDIA ugly, AMD beautiful! And the filters of Experience increaaes the sharpness, but don't turn to beautiful, like AMD!
I love when DLSS are in games, it lets my play with higher graphics quality without going below 60 fps. When I play in native 1440p it can sometimes drop unless I turn down graphics. My favourite DLSS mode is balanced. I have a rtx 3060 12gb
@waltuhputurdaway Having a 3060 is enough if you don't plan to go to the moon by having a 4090, not everyone can afford a 2k dollars gpu nowadays, grow up
This video is super helpful . I want to try this on my 4gb 3050ti especially for rdr2. But I'm worried if I will get better performance than native 1080p at all
1440p and dlss quality puts the game resolution at 1707x960(960p resolution) which will run better than 1080p since the resolution is lower and will look better(the game and textures looks sharper and more detailed). so if you use DLDSR to scale your resolution to 1440p and use DLSS Quality to downscale it to 960p, I feel like this is even better for lower end cards that have dlss and dldsr.
@@forz2882 not how it works. for a number of reasons you can find the ability to do this, but for 99% of all people when you first watch a short you have no ability to do this
Just be careful your games might look too sharp with 0 percent smoothness, less of an issue in competitive games but especially human characters skin can look weird
💥 Sharpness and definition are really bad in NVIDIA, serrated? I have an notebook Lenovo Legion 5i i7 12700h RTX 3060 and the image IN THAT THINGS are worst than in my Acer Aspire 5 Ryzen 7 5700u Integrated Graphics in the same conditions! NVIDIA ugly, AMD beautiful! And the filters of Experience increaaes the sharpness, but don't turn to beautiful, like AMD!
💥 Sharpness and definition are really bad in NVIDIA, serrated? I have an notebook Lenovo Legion 5i i7 12700h RTX 3060 and the image IN THAT THINGS are worst than in my Acer Aspire 5 Ryzen 7 5700u Integrated Graphics in the same conditions! NVIDIA ugly, AMD beautiful! And the filters of Experience increaaes the sharpness, but don't turn to beautiful, like AMD!
If you're doing DLSS from a lower resolution to a higher resolution than your monitor can show, only to downscale it for your monitor... wouldn't you be better off simply sticking with your original resolution and just choosing one of the highest DLSS quality modes?
💥 Sharpness and definition are really bad in NVIDIA, serrated? I have an notebook Lenovo Legion 5i i7 12700h RTX 3060 and the image IN THAT THINGS are worst than in my Acer Aspire 5 Ryzen 7 5700u Integrated Graphics in the same conditions! NVIDIA ugly, AMD beautiful! And the filters of Experience increaaes the sharpness, but don't turn to beautiful, like AMD!
for new people reading this, the potential higher amount of pixel data leads to more details that can carry over to other effects for better overall calculations since it has more to work with when displaying effects, and running it through both AI solutions lets it handle things like Anti-Aliasing and interpolating elements. It can vary based on implementation but there are definitely advantages.
Theres no problem here, if your monitor is 2k and use dsr to 4k you gona see 4k, not native but very close, no problem with your native monitor resolution, the problem will be your GPU, need more power even with dlss
Lol I literally just did this over the weekend, only finally gave it a shot because monster hunter world wasn't letting me use DLSS at 1080p, and it looked real blurry, but now it looks crisp around the edges... Just don't use DSR on the desktop, it'll look blurry on everything besides native res
💥 Sharpness and definition are really bad in NVIDIA, serrated? I have an notebook Lenovo Legion 5i i7 12700h RTX 3060 and the image IN THAT THINGS are worst than in my Acer Aspire 5 Ryzen 7 5700u Integrated Graphics in the same conditions! NVIDIA ugly, AMD beautiful! And the filters of Experience increaaes the sharpness, but don't turn to beautiful, like AMD!
I only have a 1080p monitor and I was missing taking advantage of DLSS by upscaling to higher resolutions like 4K. I had already tested DSR, but it was bad because it didn't adjust the smoothness to 0. Thank you very much for the tip, my game looked beautiful.
Basicly Dlss makes 1080 like shit with some fps gain but 2k with dlss make it more good with you lose some fps but not less or equal 1080p without dlss
@@FuelStation-b6w 1080 look like shit only if you want to look only the dlss, everytime i activate it, i look closely on the bad things, but if yoou just play your game with dlss quality 20%, 10min after, u will forget it is activate
If you got even an entry level 1080p card from the last two generations, try to upgrade to a 24-27 inch 1440p monitor (it's easier now than before depending on where you live). Then upscale all games to 1440p using DLSS/FSR (the original render resolution is almost 1080p). The result? You get great 1440p experience at the same fps as native 1080p. I know this is obvious to many people, but I still see people buying 1080p monitors who are neither competitive gamers nor are dealing with any financial issues. You can also use Lossless Scaling for games that don't have native support for upscaling.
I have a 2060 with an i7 4790 so in the CPU intensive games I only have like 50-80% GPU usage. Because of this short I was able to learn how DSR works and make use of all the extra GPU headroom to make games look much better without losing much performance
@@youtubeshadowbannedme I upgraded to a 1440p monitor so at least on single player GPU intensive games its not much different from a good CPU. On the CPU intensive multiplayer games it can be a bit rough but I dont really play those. I dont even really play games much at all which is why I havent just upgraded the CPU
I also use this trick. DLSS works like TAA for the most part: it takes information from previous frames. A bigger frame buffer can store more of this information
💥 Sharpness and definition are really bad in NVIDIA, serrated? I have an notebook Lenovo Legion 5i i7 12700h RTX 3060 and the image IN THAT THINGS are worst than in my Acer Aspire 5 Ryzen 7 5700u Integrated Graphics in the same conditions! NVIDIA ugly, AMD beautiful! And the filters of Experience increaaes the sharpness, but don't turn to beautiful, like AMD!
why ? i use 4 scalers at once , they all compliment each other and my textures are clear and smooth , without any anti-alias , this last windows 11 update has an AI doing all that work to smooth out the problems , my 1440p res gets upscaled 4x by nvidia DSRDL + DLSS + windows SR ( super res ) + ''lossless scaling'' from steam store ... no problem what so ever and everything looks super clear , even have my projector at 100% sharpness , i can't look at blurry textures so i don't ...
Many games don’t have DLSS, so instead use NIS, it’s just worse than DLSS but can be used in almost any game. Also if you don’t have RTX series GPU than use this too! It’s nVidia’s version of RSR And VSR is AMD’s version of DSR. Please pin this comment
Less blurry. More pixelated though. Like you just turned off AA. I usually use shaders and sharpening to get rid of most of the dlss blur. And always use dlss in quality mode. Of course you can’t really use shaders on multiplayer games.
So dlss increases frame rates but decreases resolution or makes the game blurry.... How does this happen? For higher HD type gameplay I have to turn off dlss or what..? Plz explain
@@GigaChad-vz9ng it lowers native resolution and then uses ai to more efficiently upscale it back to your native resolution. I think It looks blurry cause pixels are being placed by ai but some areas still have a lower pixel density then full native resolution. Some scenes look better than native resolution but most scenes have a blurry look.
@GigaChad-vz9ng it's in the name. Deep Learning Super Sampling meaning the resolution decreases but ai trys to upscale the image with better performance but the less resolution you have the harder the ai has to work to get the same image quality.
Great content. I use DSR + DLSSp to run SoTR maxed settings + RT in 5K, yes five K, on my UltraGear qhd monitor. The result are simply amazing❤ Love RTX cards
Thanks for help me. Now I know why my game fps drop and gpu running hot cause this setting auto set to 4k (4.0x). When I turn it off it help to boost my fps more than 20fps 🎉🎉
Never use 0% smoothing with DLDSR, with DSR yes, but not with DLDSR. The picture will be extremely oversharpened. Also DLDSR and DSR add input latency, so it's also good to take that into consideration.
I really don't understand how DLSS quality and ultra performance have the same visual quality, even though ultra performance gives me way more FPS. This is the only game where DLSS does this. I updated the file to 3.7.20 Also, without DLSS, the game is very blurry...
Seems cool, but what about Vram usage? Wont upscaling to 1440p and downscaling back to 1080p take more Vram if fhd has better details now? Or it affects fps only
This is better than you think. I just upgraded to Native 1440p. And its honestly not that bad. Native is definitely better. But DSR is much better than 1080p. If you can run it, try it! Native 1440p also runs better than DSR.
Why some people say 50% or even more smoothness for dldsr and you recommend 0%? Isn't that too over sharpened. Asking because I also find 33-40-50% a bit too soft for 4k ultrawide. Around 8-10% is okay but 0% is still sharper, idk whats best
It really depends on many factors. Your monitor, resolution and settings you use it with. In general lower is sharper (so better). So 0% should look best. However then it may look too sharp if you have quality monitor or resolution too high. I use 0% in some games and around 25-30 in others as some games will make it look too sharp.
@@sebastianm3505 I use 4k Dldsr on ultrawide monitor with 3440x1440 native res. So the dldsr res is a bit more demanding than normal 4k, it's like 5120x2160 or something like that. I found myself to be okay-ish at 8-10%. I still don't know which is best tho. I have tried 75, 50, 40, 33, you name it, can't tell much of a difference just a degrade in texture quality with higher %? But then again 0% also looks off too. Nothing is perfect for my taste, always something that catches my eye
0 is like "nearest neighbor" it will deform the image, something low but depending on the resolution like 20 or 40 will look better, use the desktop to see the sweet spot
I been doing this since I got the game. But I went back down to 1080p because I mainly just been playing Rustment 24/7 and I’ll take more frames over sharpness on the smaller maps. But nice to see you spread this info I feel it’ll help a lot.
The explanation would be the upscale factor. Quality is around 67% the next option around 50% So 67% of 1080p is less than 50% of 1440p meaning that you are basically upscaling from a higher res closer to 1080p getting better image but still getting a slight fps boost. That's the math, sorry if don't have exact numbers I've only used fsr but i think dlss factors are similar
On 1080p with fidelity fx cas enabled for mw3 I was getting 183 fps on benchmark, with this method I got 150fps -33 fps for a small quality boosts. Maybe this is more helpful for other pc games that lack scaling options.
but how does the game rendered in 1440p dlss performance (which is 50% render scale, 720p) upscaled all the way up to 1440p and then shrunk by DSR to fit on the 1080p screen look better and play faster than native 1080p?
I use it all the time, but there are a couple of inconveniences. When you need to use alt-tab you change the resolution and it takes a long time to switch. Bugs also occur.
I'd say if you want better image quality and have the hardware for it to enable dlaa. dlaa runs at the native resolution and doesn't down scale so no dlss funkiness. but I have a 3070 which is better than what most people are running but it's still worth a try
💥 Sharpness and definition are really bad in NVIDIA, serrated? I have an notebook Lenovo Legion 5i i7 12700h RTX 3060 and the image IN THAT THINGS are worst than in my Acer Aspire 5 Ryzen 7 5700u Integrated Graphics in the same conditions! NVIDIA ugly, AMD beautiful! And the filters of Experience increaaes the sharpness, but don't turn to beautiful, like AMD!
@Joaquin Sabin yea I tried the DSR thing in the past it cause so many issues so I decided to go out and get a 4k monitor Instead however even with high end specs some games struggle with 4k on ultra graphics im now starting to see a steady 60fps with star citizen
@@Jakiyyyyyyeah but one thing , with DLSS and FG your latency will be more for like 10ms , for example on native you have 40ms , with features will be around 50ms , you won’t even notice this 10ms )
There is a problem. My monitor is 165hz. When I use DSR, that goes down all the way to 60hz. And you WILL feel that difference. Know this too before using DSR
Or if you play on 2k resolution & have 2k monutor & most games are lagging - try upscale to 4k & turn dlss on, works great too. Btw 2k in game on 2k 27 inch monitor look really blurry so I always try to play in 4k or 4k upscaling at least
DLSS + DSR = DLDSR. It's just amazing thing in the world. Amazing IQ.
Introducing Deep Learining Dynamic Super Resolution, the new technology to Improve the image quality over native resolution and get better Performance
Has anyone been able to run with NVidia surround? I can't seem to enable both of them while using nvidia surround. It's either the resolution isn't available or windows reverts back to the game driver where the DSR setting isn't available. If I reinstall the studio driver and enable DSR then the resolution isn't available, it's either a lower resolution or the in game resolution is set to OPT .
Nope, DLDSR is separate to DSR and DLSS
No it’s basically dlaa
This is technically DLDSR +DLSS
Used this on ark survival ascended, increased my FPS from 50 (on high settings) to 60-70 and it looks even better now. Thank you very much!
I might try this on ark survival ascended.
What card do you have I’m curious?
@@hafeezsuprahafeezsupra53544060ti the 16 gb one
nice fake comment dude
@@hafeezsuprahafeezsupra5354 it's fake
I did this like a year ago. Its really helpful for ppl whos monitor is 1080p that the game runs with high fps than Hz you will get high quality on 1080p with some fps losing or gaining some
My pc would commit suicide at 1440p.. he's barely alive at 1080p
DLSS quality at 1080p is the same thing as DLSS performance at 1440 as both targets 1280x720 resolution rendering. you will just get a much clear image with a minor hit to performance upgrading DLSS at 1440 from DLSS at 1080 using the performance preset. and even doing this will get you a better image than native with a performance boost so that's a Win!
Me at 4k 😎
@@hotrod123231Who games in 4k lmao (I'm just trolling). I play call of duty at 1440p at 165fps because it's a good balance of graphics and performance.
Then your gpu doesnt have dlss either. Unless you have a 3050, then i feel bad for you. Other gpu's should be fine with dlss at 1440p.
How do u even turn on dlss
29k likes.. think a lot of the community would love to see a dedicated settings video. Any plans? :) Thanks!
I’m shifting my content focus, but I might revisit this someday!
@@pc_blend💥 Sharpness and definition are really bad in NVIDIA, serrated? I have an notebook Lenovo Legion 5i i7 12700h RTX 3060 and the image IN THAT THINGS are worst than in my Acer Aspire 5 Ryzen 7 5700u Integrated Graphics in the same conditions! NVIDIA ugly, AMD beautiful! And the filters of Experience increaaes the sharpness, but don't turn to beautiful, like AMD!
Would love to see something for PUBG Pc
It's the same thing on AMD side, VSR+FSR 1.0/2.0 both works really well.
But it doesn't work in the same way. DLSS and DSR are AI implemented system far superior. DLDSR (DLSS+DSR) is the most amazing IQ in the game history. it's sad that AMD isn't capable to create something similar.
@@rodrigomendes3327 Not really. DLSS and FSR have virtually the same performance cost and generally the visual quality of DLSS is slightly better but in MW2 specifically, DLSS looks quite a bit worse than even Nvidia Image Scaling.
FSR 2.0/2.1 is fairly comparable to DLSS, I would not say DLSS is 'far superior'.
@@blasianking4827 Any explanation for this is that you're blind. Sorry, I have no other.
@@rodrigomendes3327 Nvidia fanboy go somewhere else
@@pal.shouvikbro do some research
I felt the blure is too much so i never turned on dlss, but now i'll give it another chance thanks!
How is the experience?
Its great, not a huge difference but absolutely better than before, i play on 1080p 280hz monitor its permanent option for me now
@@3boodAl7asan DLSS at 1080p is effective but shines at 1440p and 4K where the image is already super sharp and the loss is damn near impossible to spot naturally, i had to watch a video on what to look for to identify upscaling.
@@timothykeller9419 it's better now with dlss 3.5. ive been using quality on 1080p and the difference is really hard to tell
@@OoSALEHoO😅😢❤oslzllsll is 0😊😊😊😅
DO NOT set smoothness to 0%, it’s going to look horribly over-sharpened. 50-60% is the sweet spot.
Default 33% is good enough
That's the whole point
25 or 33
💥 Sharpness and definition are really bad in NVIDIA, serrated? I have an notebook Lenovo Legion 5i i7 12700h RTX 3060 and the image IN THAT THINGS are worst than in my Acer Aspire 5 Ryzen 7 5700u Integrated Graphics in the same conditions! NVIDIA ugly, AMD beautiful! And the filters of Experience increaaes the sharpness, but don't turn to beautiful, like AMD!
To me it's perfect at 0%
I love when DLSS are in games, it lets my play with higher graphics quality without going below 60 fps. When I play in native 1440p it can sometimes drop unless I turn down graphics. My favourite DLSS mode is balanced. I have a rtx 3060 12gb
Of course you have a 3060 lmao 🤣
@@waltuhputurdaway Why is that a
”Of course” how would you know?
@waltuhputurdaway Having a 3060 is enough if you don't plan to go to the moon by having a 4090, not everyone can afford a 2k dollars gpu nowadays, grow up
This video changed my gaming life. Seriously. Thank you so much for this!
1440p native with balanced dlss is quite a nice sweetspot
Thank you, now I know how cod would look like in Minecraft lol.
AHAHAHAHA
This video is super helpful . I want to try this on my 4gb 3050ti especially for rdr2. But I'm worried if I will get better performance than native 1080p at all
It should work well as long as your CPU isn’t too weak. Let me know how it goes!
@@pc_blend ok then. CPU is Ryzen 5800h. Guess should be ok
@@nirmalkumar7941any news???
@@Madbandworld nah I don't have DLSS since using cracked version. Will try when I get steam version
1440p and dlss quality puts the game resolution at 1707x960(960p resolution) which will run better than 1080p since the resolution is lower and will look better(the game and textures looks sharper and more detailed). so if you use DLDSR to scale your resolution to 1440p and use DLSS Quality to downscale it to 960p, I feel like this is even better for lower end cards that have dlss and dldsr.
shorts are annoying because you got to go through the whole clip just to see one second again. I'm gonna check some dsr dlss res combos
You can slide it where you want. There is a red bar in the bottom. Sometimes it dont appears so just pause the video then it appears
@@forz2882 not how it works. for a number of reasons you can find the ability to do this, but for 99% of all people when you first watch a short you have no ability to do this
Pause on mobile: 🗿
@@charleyweinhardt just type 0:01 or a random one and click it and it sends you to the video.
@@warbotics2440 word👍
Wow, I genuinely thought you couldn't mix the two, but hey you can and it works well!
Just be careful your games might look too sharp with 0 percent smoothness, less of an issue in competitive games but especially human characters skin can look weird
💥 Sharpness and definition are really bad in NVIDIA, serrated? I have an notebook Lenovo Legion 5i i7 12700h RTX 3060 and the image IN THAT THINGS are worst than in my Acer Aspire 5 Ryzen 7 5700u Integrated Graphics in the same conditions! NVIDIA ugly, AMD beautiful! And the filters of Experience increaaes the sharpness, but don't turn to beautiful, like AMD!
💥 Sharpness and definition are really bad in NVIDIA, serrated? I have an notebook Lenovo Legion 5i i7 12700h RTX 3060 and the image IN THAT THINGS are worst than in my Acer Aspire 5 Ryzen 7 5700u Integrated Graphics in the same conditions! NVIDIA ugly, AMD beautiful! And the filters of Experience increaaes the sharpness, but don't turn to beautiful, like AMD!
Adding some smoothness will make those rough edges look a little better
How do u add smoothness
@@ceethannatch7959 don't set it to 0% like in the video?
If you're doing DLSS from a lower resolution to a higher resolution than your monitor can show, only to downscale it for your monitor... wouldn't you be better off simply sticking with your original resolution and just choosing one of the highest DLSS quality modes?
💥 Sharpness and definition are really bad in NVIDIA, serrated? I have an notebook Lenovo Legion 5i i7 12700h RTX 3060 and the image IN THAT THINGS are worst than in my Acer Aspire 5 Ryzen 7 5700u Integrated Graphics in the same conditions! NVIDIA ugly, AMD beautiful! And the filters of Experience increaaes the sharpness, but don't turn to beautiful, like AMD!
for new people reading this, the potential higher amount of pixel data leads to more details that can carry over to other effects for better overall calculations since it has more to work with when displaying effects, and running it through both AI solutions lets it handle things like Anti-Aliasing and interpolating elements. It can vary based on implementation but there are definitely advantages.
Theres no problem here, if your monitor is 2k and use dsr to 4k you gona see 4k, not native but very close, no problem with your native monitor resolution, the problem will be your GPU, need more power even with dlss
Lol I literally just did this over the weekend, only finally gave it a shot because monster hunter world wasn't letting me use DLSS at 1080p, and it looked real blurry, but now it looks crisp around the edges... Just don't use DSR on the desktop, it'll look blurry on everything besides native res
Monster hunter world only has DLSS version 1 not the latest. It's blurry af.
Idk why Capcom won't update it.
@@duskairableYou're able to update it yourself since DLSS is a DLL file if I recall
💥 Sharpness and definition are really bad in NVIDIA, serrated? I have an notebook Lenovo Legion 5i i7 12700h RTX 3060 and the image IN THAT THINGS are worst than in my Acer Aspire 5 Ryzen 7 5700u Integrated Graphics in the same conditions! NVIDIA ugly, AMD beautiful! And the filters of Experience increaaes the sharpness, but don't turn to beautiful, like AMD!
this is a pretty good idea, I always though that things look blurry but with this I can get it looking quite clear
This is actually smart. Never thought about this. Gotta give it a go, since it is an "emulated resolution" trying to output it too.
I only have a 1080p monitor and I was missing taking advantage of DLSS by upscaling to higher resolutions like 4K. I had already tested DSR, but it was bad because it didn't adjust the smoothness to 0. Thank you very much for the tip, my game looked beautiful.
Bro is saying you will have 59fps instead of 60fps💀
no bc if you follow
native 1080p : 60fps
fake 1440p dlss performance 1080p : 70fps
am i right ?
@@Enzq7539yes
You can't be this dumb💀
You will get higher fps + better quality.
Basicly Dlss makes 1080 like shit with some fps gain but 2k with dlss make it more good with you lose some fps but not less or equal 1080p without dlss
@@FuelStation-b6w 1080 look like shit only if you want to look only the dlss, everytime i activate it, i look closely on the bad things, but if yoou just play your game with dlss quality 20%, 10min after, u will forget it is activate
If you got even an entry level 1080p card from the last two generations, try to upgrade to a 24-27 inch 1440p monitor (it's easier now than before depending on where you live). Then upscale all games to 1440p using DLSS/FSR (the original render resolution is almost 1080p). The result? You get great 1440p experience at the same fps as native 1080p. I know this is obvious to many people, but I still see people buying 1080p monitors who are neither competitive gamers nor are dealing with any financial issues. You can also use Lossless Scaling for games that don't have native support for upscaling.
I couldn't notice much difference in 1600p between DLSS and Native😢
So this a positive thing if you have no quality loss with dlss. Also are you using a 16:10 laptop ?
@@randomgames9025 YUP
@Arkeshan OK than it's a good thing that you don't lose quality ?
I have a 2060 with an i7 4790 so in the CPU intensive games I only have like 50-80% GPU usage. Because of this short I was able to learn how DSR works and make use of all the extra GPU headroom to make games look much better without losing much performance
Holy crap your 2060 is being super bottlenecked; upgrade to at least Core 10th Gen
@@youtubeshadowbannedme I upgraded to a 1440p monitor so at least on single player GPU intensive games its not much different from a good CPU. On the CPU intensive multiplayer games it can be a bit rough but I dont really play those. I dont even really play games much at all which is why I havent just upgraded the CPU
then its your GPU underperforming or you run on low fps or other part of pc is failing :) GPU is suppose to run 100%. Maybe not on 60 fps
@@cgd-meh4464 Its just because the 4790 is not fast enough to allow the 2060 to run at 100%. Its a 10 year old CPU now
@@xDAKPRODUCTIONSx understandable
I'm so confused how this works so well. DLSS downscaling it and then we upscaling it again
You have no idea how useful this was to me. Thank you.
I do the same thing but using DSR in 4k to 2k and using DLSS in performance. The result is perfect.
Which is better?
I also use this trick. DLSS works like TAA for the most part: it takes information from previous frames. A bigger frame buffer can store more of this information
Smoothness at 0 is insane lol
💥 Sharpness and definition are really bad in NVIDIA, serrated? I have an notebook Lenovo Legion 5i i7 12700h RTX 3060 and the image IN THAT THINGS are worst than in my Acer Aspire 5 Ryzen 7 5700u Integrated Graphics in the same conditions! NVIDIA ugly, AMD beautiful! And the filters of Experience increaaes the sharpness, but don't turn to beautiful, like AMD!
why ? i use 4 scalers at once , they all compliment each other and my textures are clear and smooth , without any anti-alias ,
this last windows 11 update has an AI doing all that work to smooth out the problems , my 1440p res gets upscaled 4x by nvidia DSRDL + DLSS + windows SR ( super res ) + ''lossless scaling'' from steam store ... no problem what so ever and everything looks super clear , even have my projector at 100% sharpness , i can't look at blurry textures so i don't ...
i love aliasing THOUGH
Many games don’t have DLSS, so instead use NIS, it’s just worse than DLSS but can be used in almost any game.
Also if you don’t have RTX series GPU than use this too!
It’s nVidia’s version of RSR
And VSR is AMD’s version of DSR.
Please pin this comment
Or use the LukeFZ mod and emulate a fake nvidia gpu and forces the DLSS
Less blurry. More pixelated though. Like you just turned off AA. I usually use shaders and sharpening to get rid of most of the dlss blur. And always use dlss in quality mode. Of course you can’t really use shaders on multiplayer games.
So dlss increases frame rates but decreases resolution or makes the game blurry....
How does this happen?
For higher HD type gameplay I have to turn off dlss or what..? Plz explain
@@GigaChad-vz9ng it lowers native resolution and then uses ai to more efficiently upscale it back to your native resolution. I think It looks blurry cause pixels are being placed by ai but some areas still have a lower pixel density then full native resolution. Some scenes look better than native resolution but most scenes have a blurry look.
@GigaChad-vz9ng it's in the name.
Deep Learning Super Sampling meaning the resolution decreases but ai trys to upscale the image with better performance but the less resolution you have the harder the ai has to work to get the same image quality.
That’s maybe because the image is over-sharpened. Set the smoothness to 50%.
@@GigaChad-vz9ngask Nvidia
Used it for many games on my 1080p TV and games look loads sharper.
Great content. I use DSR + DLSSp to run SoTR maxed settings + RT in 5K, yes five K, on my UltraGear qhd monitor. The result are simply amazing❤
Love RTX cards
@waltuhputurdaway yes it have LMFAO
Thanks for help me. Now I know why my game fps drop and gpu running hot cause this setting auto set to 4k (4.0x). When I turn it off it help to boost my fps more than 20fps 🎉🎉
Just tested this and this works great in DCS. It got rid of the blur and makes the sim sharper when using dlss. 👍🏽
Never use 0% smoothing with DLDSR, with DSR yes, but not with DLDSR. The picture will be extremely oversharpened. Also DLDSR and DSR add input latency, so it's also good to take that into consideration.
Wow, what a gain from 201 to 226.
It's so huge !
I want a 1000 $ graphic card right now !
Been doing this for years but thanks anyway for the tip. 1440p already looks way better even on a 1080p screen
I really don't understand how DLSS quality and ultra performance have the same visual quality, even though ultra performance gives me way more FPS. This is the only game where DLSS does this. I updated the file to 3.7.20
Also, without DLSS, the game is very blurry...
Seems cool, but what about Vram usage? Wont upscaling to 1440p and downscaling back to 1080p take more Vram if fhd has better details now? Or it affects fps only
That's so cool, seriously really good idea
Thank you man! You are the best !
4K (dldsr) and dlss performance it’ sur amazing hack for my rtx3080ti and 2k screen ❤
life saver bro!
This is better than you think. I just upgraded to Native 1440p. And its honestly not that bad. Native is definitely better. But DSR is much better than 1080p. If you can run it, try it! Native 1440p also runs better than DSR.
Ok so its just uber sharpened
I use DSR to make it to 4k over 1440p and move from dlss performance to ultra performance ;:D
Is it worth it?
Why some people say 50% or even more smoothness for dldsr and you recommend 0%? Isn't that too over sharpened. Asking because I also find 33-40-50% a bit too soft for 4k ultrawide. Around 8-10% is okay but 0% is still sharper, idk whats best
It really depends on many factors. Your monitor, resolution and settings you use it with. In general lower is sharper (so better). So 0% should look best. However then it may look too sharp if you have quality monitor or resolution too high. I use 0% in some games and around 25-30 in others as some games will make it look too sharp.
@@sebastianm3505 I use 4k Dldsr on ultrawide monitor with 3440x1440 native res. So the dldsr res is a bit more demanding than normal 4k, it's like 5120x2160 or something like that. I found myself to be okay-ish at 8-10%. I still don't know which is best tho. I have tried 75, 50, 40, 33, you name it, can't tell much of a difference just a degrade in texture quality with higher %? But then again 0% also looks off too. Nothing is perfect for my taste, always something that catches my eye
0% basically makes it look like native 1440p, for me at least, I prefer it at 0%
@@wolfythesunbro what monitor do you have?
@@johnsteves9158 lg 34wp65c-b ultrawide
0 is like "nearest neighbor" it will deform the image, something low but depending on the resolution like 20 or 40 will look better, use the desktop to see the sweet spot
does this work with a 1080p monitor?
I been doing this since I got the game. But I went back down to 1080p because I mainly just been playing Rustment 24/7 and I’ll take more frames over sharpness on the smaller maps.
But nice to see you spread this info I feel it’ll help a lot.
What application do you use to adjust DLSS settings? I only have GeForce Experience and NVIDIA control panel.
This was specifically in-game for mw2 but you can do something similar for dlss-capable games.
What's the game at the end?
You are a genius!
Does your latency take a hit? Or does Nvidia’s reflex come into play here and works ?
Great Work You just gain a never subscriber and follow thanks man
Smart guy. That's the way people with high end gpu should use smart Upscaling.
So, better than 1080p, and better framerate (Wtf?)
The explanation would be the upscale factor.
Quality is around 67% the next option around 50%
So 67% of 1080p is less than 50% of 1440p meaning that you are basically upscaling from a higher res closer to 1080p getting better image but still getting a slight fps boost.
That's the math, sorry if don't have exact numbers I've only used fsr but i think dlss factors are similar
@@christhian0512 67% of 1080p and 50% of 1440p is both 720p so it upscales from the same resulution
@@dwaynethemineraljohnson4121440p is 2times of 1080p
Pretty cool.
I just use balanced and I’m happy with 4k/60
back in days people just use msaa on 1080p and it looked good
How to make this work with FSR?
Will be sure to try this out when i get my laptop 😃
surely the input lag is noticable? when using dlss on mw3 its got a small 5-30ms delay
Like if You watching this Video For GTA V
That looks crunchy af
Whats the difference between this and Vulkan
Anything like this for amd ??
On 1080p with fidelity fx cas enabled for mw3 I was getting 183 fps on benchmark, with this method I got 150fps -33 fps for a small quality boosts. Maybe this is more helpful for other pc games that lack scaling options.
Bruh these graphics appear more pixelated than 97's games
My RDR2 Looks great after doing this on a 1080p monitor
I usually just play at native 1440p. I avoid using DLSS whenever possible.
Me set 99% smoothness and like the little blur effect,i think I'm weird.
your not weird, either your blind or you never had better...
but how does the game rendered in 1440p dlss performance (which is 50% render scale, 720p) upscaled all the way up to 1440p and then shrunk by DSR to fit on the 1080p screen look better and play faster than native 1080p?
Ai learning for faster frame output, instead of creating the frame from scratch
Any solutions for blurry for the 1080p monitors?
Why not just use FXCAS at this point. It’s the same frame rate. Am I missing something ?
How do I prevent the screen looking stretched though?
Been doing since 2021 and it Works Great! mostly 1440P with DLSS Balanced and looks better then 1080P native in my Opinion👍👍
Thanks
ещё генерацию кадров осталось включить
I use it all the time, but there are a couple of inconveniences. When you need to use alt-tab you change the resolution and it takes a long time to switch. Bugs also occur.
I'd say if you want better image quality and have the hardware for it to enable dlaa. dlaa runs at the native resolution and doesn't down scale so no dlss funkiness. but I have a 3070 which is better than what most people are running but it's still worth a try
Dlaa isn’t nearly as common as dlss
💥 Sharpness and definition are really bad in NVIDIA, serrated? I have an notebook Lenovo Legion 5i i7 12700h RTX 3060 and the image IN THAT THINGS are worst than in my Acer Aspire 5 Ryzen 7 5700u Integrated Graphics in the same conditions! NVIDIA ugly, AMD beautiful! And the filters of Experience increaaes the sharpness, but don't turn to beautiful, like AMD!
@@the.ben.johnson found the bot account.
Nice bro this change my life
how DRS affect your monitor that only is 1080p ?
Do I need to turn on VSR along with DSR will that help I have a Ryzen 7900X3D & RTC 4090 liquid
You should not be playing at 1080p with a setup like that
@Joaquin Sabin yea I tried the DSR thing in the past it cause so many issues so I decided to go out and get a 4k monitor Instead however even with high end specs some games struggle with 4k on ultra graphics im now starting to see a steady 60fps with star citizen
Isn't there a latency penalty due to the image being downscaled instead of just being rendered natively
No latency penalty with DLSS Super Resolution. With DLSS 3 Frame Generation, yes.
@@Jakiyyyyy thx good to know
@@Jakiyyyyyyeah but one thing , with DLSS and FG your latency will be more for like 10ms , for example on native you have 40ms , with features will be around 50ms , you won’t even notice this 10ms )
does it hurt your gpu? for example i have a 1440p monitor then i wll try to use dsr from 2k to 4k is that owk?
Yes it’s ok, graphics card does everything.
There is a problem. My monitor is 165hz. When I use DSR, that goes down all the way to 60hz. And you WILL feel that difference. Know this too before using DSR
Should i try this with a 3060 ti and a ryzen 5 5600x? because in rdr2 dlss quality 1080p my game looks like dogwater
im glad this is something new to try. welldone.
That's where AMD comes in...
Simply thank you!
What how did i just change frok 1920 p to 2560 p. Is that bad for my monitor?
Why are ulypu using dlss on a competitive shooter? Id doubles system latancy . Do some research
Ah yes you upscale the monitor to then downscale the game with dlss makes sense
Or if you play on 2k resolution & have 2k monutor & most games are lagging - try upscale to 4k & turn dlss on, works great too.
Btw 2k in game on 2k 27 inch monitor look really blurry so I always try to play in 4k or 4k upscaling at least
Thanks for the tip bro
"waa waa wawawa waa waaaa wawa wa waaaaaa"
Will this effect any other games on pc like fps going down or something
thanks that help a lot