Honda Rancher 420 Ball Joint Replacement | 2012 Honda TRX420 Rancher | Partzilla.com
HTML-код
- Опубликовано: 5 июл 2024
- Get parts and tools for your Honda Rancher ball joint replacement: partzil.la/Rancher-420-Ball-Jo...
In this video, John will show you how to replace the lower ball joints on our Honda Rancher 420. We’ll also replace the upper ball joints on the Rancher. But first, a note about the parts here: on many machines, the lower and upper ball joints are the same part number. On the Rancher 420, you’ll need two different part numbers.
Honda Rancher 420 LOWER BALL JOINT (Part# 51355-HP5-601): www.partzilla.com/product/hon...
Honda Rancher 420 UPPER BALL JOINT (Part# 51375-HP5-601): www.partzilla.com/product/hon...
With our parts together, we’ll get the wheel and hub removed. The upper ball joint on the Honda Rancher is pressed into the upper arm, and the lower ball joint is pressed into the steering knuckle, so we’ll get those removed. Then, we’ll head to the bench, where John will show you how some simple supplies from a hardware store can be used to help press the old joints out and then help you get the new joints installed.
Once we’re done, we’ll get everything back together again.
Check out the Honda TRX420 front steering knuckle diagram for the lower ball joint (#18): www.partzilla.com/catalog/hon...
See the Honda Rancher 420 front arm diagram for the upper ball joint (#6): www.partzilla.com/catalog/hon...
John also uses a couple of special tools for the job. Get the Honda ball joint separator: www.partzilla.com/product/hon...
Get the Motion Pro adjustable torque wrench adapter: www.partzilla.com/catalog-pro...
Read how to do this job step by step:
PART 1: www.partzilla.com/blog/honda/...
PART 2:
www.partzilla.com/blog/honda/...
Did you see the new CV boots? See how to replace the CV boots on your Rancher here: • Honda Rancher 420 CV B...
Want to replace the wheel bearings on your Honda Rancher? Here’s how: • How to Change the Fron...
VIDEO HIGHLIGHTS:
Removing the wheel - 1:00
Removing the hub - 2:20
Removing the brake caliper - 2:40
Disconnecting tie rod - 3:40
Disconnecting steering knuckle - 4:10
Using ball joint puller - 4:55
Removing CV axle - 7:30
Disconnecting shock and removing upper arm - 8:05
Removing upper ball joint - 8:45
Installing upper ball joint - 10:30
Removing lower ball joint - 11:35
Installing lower ball joint - 12:20
Replacing upper arm - 13:40
Replacing steering knuckle - 14:50
Connecting steering rod - 15:30
Replacing the hub - 17:45
Replacing the caliper - 19:35
Replacing the wheel - 20:25
Got a Rancher 420? Bookmark our playlist for more maintenance videos: • 2012 Honda TRX420 Ranc...
Find thousands of Honda OEM ATV parts here: www.partzilla.com/catalog/hon...
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2012 Honda Rancher 420, but you may have similar steps for your Honda ATV. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.
RELATED CONTENT:
Honda Rancher 420 front brake pad replacement:
• How to Change the Fron...
Honda Rancher TRX420 tie rod end replacement:
• Honda Rancher 420 Tie ...
#HondaATV
#HondaRancher420 
Авто/Мото
Signs of a sincere sales person. "Honda makes a special tool to do this. Will I sell you one? Yes, but are you going to buy a tool you only use once? So I will show you a work around. Honest and down to earth..... Respect.
Great job now please show us tools that we can get by with without having to buy stuff as well thank you.
You're simply the best most people show us how to with the machine at the shop not everyone has those at home 👏🏻👏🏻👏🏻👏🏻👏🏻
These are such great video's, thank you for putting these out there. Extremely helpful for the DIY'er.
Glad to help!
You make this look so easy : ) Do it yourself tools are great thanks. Ill be supporting partzilla in your easy detailed catalog. Thanks again : )
You the man.. always a great help. I'm doing a 350 rancher 4x4 lower ball joints, this video definitely helps
12:27 Lmao 😂 John’s all happy flipping the pipe fitting.
sorry to be off topic but does anyone know a tool to log back into an Instagram account..?
I somehow forgot the password. I would appreciate any help you can give me!
@Gannon Ben Instablaster =)
I pulled off the rubber boots super easy you can just use a deep well socket & press.
Thanks for the helpful video and parts website. This is my next job on the quad...
For anyone looking for a shopping list: (1)1.25" PVC Conduit Coupler, (1)1.25"x1" PVC Conduit Reducing Bushing, and (2) 1.25" Iron Close Nipples
I found that a shower valve socket worked better than the close iron nipples, I had one laying around but a set of them is $12 at Harbor Freight if you don't. Did this entirely with a sturdy vise and the supplies listed above. Takes a LOT of torque on the vise to break them free when pressing out, but once they move, the rest is easy.
Followed this and did the ball joints in my 420. Thanks John for the helpful tips with the pipes.
Great job on explaining how to get it done!
Thank you very much...Looks easy enough for a Cave Man to do it
THANKYOU YOUR VIDEOS ARE EXCELLENT I WILL BE A CUSTOMER OF YOUR PARTS
Great video! Love it.
Hey partszilla I have a bayou 300 1996 the starter went bad and the pull rope two so I just tried roll starting it and it will not it only runs while it’s rolling could you please help me with this
Why did you take the axle out ?
I think I'm a cave man lol
The video did make it look easy, but I've been fighting this tooth and nail for several months now. From using the vice to the press it's been an uphill battle. I've finally got three out of four ball joints replaced. This shouldn't have been that hard. If there was a tool to help replace the ball joints. I would have loved to see it in action so I could make the decision if I wanted to get it or not. That's just my two cents.
Hello can you please tell me the part number of the bigger one?? Thanks in advance
The bigger one is 51375-HP5-601. That is the upper ball joint: www.partzilla.com/product/honda/51375-HP5-601
How much is the tool?
Can you tell me why mine wont idle after giving it throttle
Carb issue most likely
John is lieing this shit was hard. Had to take to shop.
Hola será posible los videos en español
Si algunos vídeos en español
We are from America, we speak English.
$292.57 for a ball joint puller?!! Talk about paying for the name "Honda"!
Amazon has a 3 piece ball joint separator, tie rod ball joint puller removal tool and a Pitman arm puller, ALL 3 PIECES FOR $37.99!
"STICK IT IN 'EM DEEP AND BREAK IT OFF!"
Hate to be this guy but if your going to use that adapter for the torque wrench there’s a math formula that you have to use to compensate for the leverage you gain. Some companies even have expect it to be done when using a crow foot.
Love your videos tho keep up the good work!
I hate to think you torque it, then tighten it further to align the castle nut holes? Just snug and tug. Promise!
BJ separator is $300!!! I need a better way to get my knuckle off
long crowbar will bust it loose
Big metal FORK