woodturning green branches in 5 easy steps with the pith

With these 5 easy steps anyone can wood turn green end grain branches and logs by centering the pith. This minimizes the chances of having cracks form around the pith while it dries. I am using a 6 inch diameter piece of spalted maple to make this vase.
The foredom rotary tool i used amzn.to/46VWGft
The kutzall burr i used amzn.to/3MvonUj
Visit blacklabelwoodworks.com to see more of what I make.
I do interactive remote demos through Zoom for clubs and to the public. Visit my website to for more details and a schedule of upcoming pay per seat public demos.
www.blacklabelwoodworks.com/i...
There are risks involved with woodturning. My videos are only for entertainment purposes. If your not familiar with the turning techniques I use consult with an experienced instructor or mentor. Always use appropriate eye, face, and lung protection while woodturning.
As an Amazon Associate I earn from qualifying purchases.
Some of the tools I use in my shop.
Grizzly G0766 lathe amzn.to/3kiHBhX
Hurricane turning tools bowl gouges amzn.to/3CY32Mp
Hurricane turning tools skews amzn.to/2YrfkxQ
Nova Supernova 2 chuck amzn.to/3kmeoT8
Grizzly 17” bandsaw amzn.to/3qh1ee4
Wen slow speed grinder 8” amzn.to/3D0YfK6Turning birds mouth bowls is a great way to use all those small pieces of logs and branches. They are great practice without using expensive pieces of wood. You can literally go into your backyard and grab any decent size branch to use.

[@WoodworkingTop535]

Very interesting and useful video, like

[@jayp4083]

Great camera work on hollowing it out! Fascinating.

[@BlackLabelwoodworks]

Many thanks!

[@philkrueger5961]

Have you ever tried this with black walnut? I know that black walnut likes to crack when it dries out so is this a trait that does not allow you to turn green walnut?

[@DougMilleratWoodSpunRound]

Very nice vase. Well done.

[@BlackLabelwoodworks]

Thank you! Cheers!

[@sethwarner2540]

Huh! sander on a stick! cool! The wood itself turns the sander!

[@BlackLabelwoodworks]

Its an inertia sander there are some commercially made ones or you can make your own with a 1/4 inch bronze bushing, a small round magnet and a 1/4 inch sanding mandrel.

[@davidfriedman3962]

Thank you for this lesson. As I listen do typically leave the wood in the chuck while drying?
Again thank you.
David

[@BlackLabelwoodworks]

Thanks for watching. I take it out of the chuck to dry. Because I centered it on the pith the growth rings are pretty even around and it does not warp.

[@zenletter]

I know how the camera hollowing system works but I’ve never seen the superimposed image of the tool. How did you do that? Make a stick on image?

[@BlackLabelwoodworks]

Thanks for watching I made a video awhile back on how i do it.
ruclips.net/video/kzqyAgVXEZs/видео.html

[@peterhase1045]

that piece of wood was obviously dead for quite a time. It might be wet, but I would not call it green. All th intracellular water should have been gone for a while.