FORD FIESTA ZETEC 2010 COPART SALVAGE REBUILD PT 1
HTML-код
- Опубликовано: 27 окт 2020
- Hi welcome
Ford fiesta zetec 2010 copart salvage rebuild pt1
This video i work on the front end of this fiesta removing the old bumper and slam panel with crash bar take out the rad and fit it in the new slam panel and refit the crash bar back in place.
I also fit a new cam cover gasket because oil is leaking out the back so needs changing .
Thanks for watching
Resurwreck autos uk Авто/Мото
Great video, well explained and carried out . First time watching your video.👍🇬🇧
Thanks mate appreciate it buddy 👍👍
nice one
Nice
Thanks buddy
That’s coming together very well 👍👍👍
Thanks Roy nice one
Nice little car for someone nice job Mark 👍👍
Thanks Malc nice one
Nice video mr resurwreck.
Thanks Peter nice one
Nice looking car when it's finished, my first new car was a mk2 fiesta, it looks the same colour. These cars have come a long way since then. I slow the time lapse down, so that's not a problem for me. I got my C&G many years ago and got out of the motor trade, and went into building maintenance. I then got my C&G as an electrician but have now retired after working for myself for about 15 years. I now have two fords, a sportka and a streetka which I maintain myself together with my kids cars. I would love to be able to use my garage, but it just full of tools. Well good luck, keep safe and keep doing the fiesta's
Hi Peter thanks buddy how strange i got out of the building maintenance and got in to this motor trade
Great car looks like oil has been changed regularly. Nice and clean inside when you had cam cover off .
Thanks Rich it does seam like nice clean oil nice one buddy
Nice car, quick turnaround and a cheap car for someone!! Well done mate, keep the jobs coming in and turned around again! Nice videos, great work and good content! 👍🙂
Thanks Steve nice one
Personally I don’t mind the time lapse. However. I think what some people want to see the basics, for example (to remove the bumper you need to unclip here, here and here. And bolts can be found here here and here)
If that makes sense 👍
Not on every car though
Still loving to content. Keep them coming 👍
Thanks Will i do now what you are saying i will try things like that
£2000 tops for a pre face lift and it’s red which red cars are harder. So be happy with the 2k.
I wouldn’t personally take the rads off and just put the new rad pack hosing on around it. You’re doing right by lining it up while the bumper is off and if the headlights are too high or too low you can undo the 13s on the slam panel. Jack under it and slowly lift the jack up so it’s perfect and then tighten your 13s up.
Thanks Adam i sold a 2012 fiesta 1 mouth ago and got 2750 so i'll be happy with 2k for this one and you are so right buddy i do that all the time now just jack it up at the front to line things up nice one buddy
That’s brilliant news that the cambelt has already been done and yes the belt does look really new
Hi mark the interior looks really good brilliant work well done
Thanks Ben nice one buddy 👍👍
A sticker under the hood when a new cam belt's fitted, should be law. Another great interesting video, thanks for making and listing it all. Shane. :-)
Hi Ian I do agree with that it should be law 😂
Hi mark looks a really nice car and should be a quick turnaround for you and let’s hope you can make a good profit on it and another brilliant video as always and have you been able to bid on then more cars yet then and hope you are staying safe and well
Thanks Ben nice one buddy 👍👍
That’s coming together nicely, it’ll be a good cheap car for someone
Thanks mate it will be nice one
😉
nice video mark
Thanks Stephen nice one
Good luck Mark that will fly away like a hot cake when finished and looks like it’s been well looked after as well I would estimate selling for say £2400 to £2700 as I think £1900 is too low best regards Mark from billericay 👍🇬🇧
Thanks Mark i will see what i can get for it but it's looking like a good flip this one nice one buddy
Be a good little car for someone
👍👍
Hi mate . Do you know where the ambient temperature sensor is located on this car
Balls, I forgot about the heater, do you still need the 110v one?
Looks chilly in there mate...
I could really do with some advice on this as literally about to do this on my own tomorrow morning...
Hi Mark , nice work ….did you have to degass the AC before removing the rad etc ?
Hi Lee I think so a mechanic pulled it for me
Nice job, any more coming this week? Henry is a great hoover for sure had one for years.
Thanks Gary can't go wrong with Henry i a'm looking this week and every week
It’s all good m8 keep pumping them out soon be driving a Lamborghini/Ferrari, any chance you can show what tool you use like what your need to take off a bumper only my lad said said not a lot of people ( not you) show the tool to give and idea of what you need 👍🍺🇬🇧😎
Thanks buddy I will show what tools if I can no problem 👍👍
There's an INA cambelt sticker on the bonnet. Usually the mileage and date is recorded on there. 👍
Thanks Richard there is one on the bonnet I showed it on the collecting this car
what is the size of this engine? 1.4L properly, or 1.6L
I know u follow Rob and Chris on Salvage rebuilds uk , hope they linked you up with Gala Motors in Benfleet Ford spares. What type of mastic was used on the rocker cover ?
Thanks Richard I do use Gala motors mate but are expensive for parts but some times get a good deal and I use gasket mastic for the cam cover 👍👍
Have you tried partsbuster for original parts copies at discount price .,recommended and used by Serious about salvage
@@richardnorth5994 yes mate I do use them nice one buddy 👍
Sent you a pm found you a possible steel bargain won’t be around long at the price 😉
Thanks Perry ill have a look nice one buddy 👍👍
Does it not have a three button remote key?
Hi mate it does why is that
@@ResurwreckAutosUK it just looked like the key you were using wasn’t a three button one. I guess it might be the pre folding blade type. No worries.
@@silvermane9370 yes mate it’s the non folding type 👍
Got a question mate
Hi mate what’s the question
I actually wanted to see the rad replacement into the panel😭😭😭
Hi buddy I have done loads since that video check out so of my other videos 👍👍
The cam belts been done or has it 😂😂
Thomas you can't trust things unless sean for your self true
Hi Mark did you spend too much money and your mrs wasn't happy and she punched you in the eye lol, also i think when you buy a fiesta its going to be a matter of course to change that gasket
😂No mate had a close cool I was using a grinder without safety glasses not good
@@ResurwreckAutosUK shit you was lucky, my mate was gutting through an exhaust with a 9" grinder and it grabbed bounced and cut through his jaw and slit his throat lucky he survived so always wear the right protection
I think you should try and work on a limited number of different types of car. You will get to know the std faults and your repair times will be quicker due to familiarity. Only drawback might be the content becomes a bit samey, but after all your doing this to make a profit aren't you?
Hi Dave you are so right buddy thinking just stick with fords fiesta focus ka and move up to like fiesta st and focus st