Roofing hammer restoration. Cheap car boot find...
HTML-код
- Опубликовано: 18 окт 2024
- Hi Guys!
Welocome to another restoration video.
This time tried to restore a vintage roofing hammer.
Hope you will enjoy this too repair and relax watching the video.
🤝By using affiliate links below you support the channel and tool restorations🤝
✅Products for restorations✅ (Amazon affiliate link)
Consumables:
🔗WD 40: geni.us/wIYNtsb
🔗Paper towels: geni.us/HdmkB
🔗Wire wheel 150mm (soft): geni.us/x1ZDT
🔗Wire wheel 150mm (hard): geni.us/WA3OM8Y
🔗Fibre wheel: https: //geni.us/u4RW
🔗Buffing Polishing Compounds: geni.us/3veC4hb
🔗White spirit: https: //geni.us/ovRDV
🔗Multipurpose Grease: geni.us/fWZY3pC
🔗Spray paints: geni.us/y7JpOL
🔗3 in 1 oil: geni.us/XC0H
Hand tools:
🔗Pick set: geni.us/OBlRR2B
🔗Screwdriver set: geni.us/x5c1uH
Power tools:
🔗Bench grinder: geni.us/BOde
🔗Belt sander 1'' x 30'': geni.us/jYkK5s
🔗4" x 36" (100 x 914mm) belt sander: geni.us/djHZBP
🔗Bench buffer/polisher: geni.us/bFfo
✅ For inquiries contact me at:
📧 falcon390workshop@gmail.com
#restoration
#diycrafts
#tools
Mechanical Wonders Skill Beyond Imagination
Thanks 👍
What a great restoration 👍👍
Thank you 😊
Too nice to put back to work. Should display it in a shadow box. Thx!
Thank you. It will go on my wall with the rest of the restoration. I will use it in case of emergency 👍
COOL !!
Thank you 👍
👍👍👍👍👍
👍 thanks 👍
The reason the hammer head threw off so many sparks is because it is harden. More that likely the axe side is worn past its hardened metal.
Thanks. That is interesting.
Hatchet of Damocles? Mini boarding axe? Oompa Loompa Poleax?
I like it. That's good 👍
It's so obvious now but it has never occurred to me that simply scraping a dirty hammer handle will clean it somewhat. Just goes to show you are never too old (70) to learn something new. By the way, not sure about the red paint and although the cutting side is too small to be a true axe you had no choice but to remove the broken edge. Can still be used by a roofer or for whittling but the hammer side being so long must have affected the balance.
All it takes is razor blade and a bit of sanding and handle look nicer. I'm glad you picked something up from my video. You are right about the balance. It feels front heavy. It won't be my everyday hammer. Only for special jobs. Cheers
You worked hard.. but you made it too small as an Axe 🪓...
It's a roofing hammer. It still does the job 👍
I don’t see where he had much choice. The only other option was to ignore the broken part. Great job.